Increase Output by 100% with only 50% Increase of Input

The Bedini SG has been around for about 15 years and it seems there is no end to the surprises that occasionally pop up that teach us one thing – we haven’t learned everything about it yet!

On November 2nd, we’re launching Bedini SG – The Complete Advanced Handbook, which shows how to make low drag generators to make the most use of the mechanical work, but there is a whole lot more.

One thing we’re going to full disclose is a special mode that John Bedini developed that allows us to increase the output by 100% with only a 50% increase of the input! How do we only increase the input energy by 50% but DOUBLE the amount that is available on the output? The Advanced book will give the entire schematic and working theory about how and why it works.

On November 2nd, we’re making a video available on the Bedini SG website where we discuss all three books but we even show a demo where the electrical output doubles by only increasing the front input by half.

If you don’t have the first or second book, just wait until November 2nd when you can get your hands on the entire triple combo pack at a huge discount!

With this third book, this trilogy will give more information about real free energy circuits than anything that has ever been published. Especially when we disclose all the circuits necessary to accomplish it.

SERPS Interview with Jim Murray & Paul Babcock 2014-10-22

Live Q & A call with Jim Murray & Paul Babcock taking questions from those who own a copy of their recent presentation The Secret of Tesla’s Power Magnification regarding the principles taught as applied to Jim’s SERPS technology which was shown to have a COP of almost 50.0 (5000%).

Presentation is here: http://teslaspowermagnification.com

Bedini SG – The Complete Advanced Handbook – Release Date November 2, 2014

Bedini SG - The Complete Advanced Handbook

Bedini SG – The Complete Advanced Handbook is the most highly anticipated release that we have ever made available.

Two of the most popular books are Bedini SG – The Complete Beginner’s Handbook and Bedini SG – The Complete Intermediate Handbook.

The Beginner’s book walks the reader through all of the exact specification that John Bedini uses to build his own energizers, plus is shows the difference between repulsion and attraction mode which has only been discussed in the last couple years.

The Intermediate book teaches all about Tesla’s Method of Conversion, which is taking the electrical recovery from the coil, charging a capacitor with it and discharging that to a low impedance load like a battery.

The Advanced book will cover in great detail how to turn the mechanical work of the wheel into electricity in a very low draw way but it will also reveal a few more surprises. For the first time ever, details on the famous “Watson Machine” will be disclosed that have never been public as well as details on a few other Bedini technologies. This book has the keys necessary to take everything to the next level like never before.

The release date for Bedini SG – The Complete Advanced Handbook is November 2nd, 2014.

http://bedinisg.com

Go here for the full press release: http://emediapress.com/2014/11/02/teslas-technology-miniaturized-and-simplified-for-the-masses/

Watson Machine

Thirty years ago at the Tesla Symposium in Colorado Springs, Jim Watson demonstrated a very large scale machine based on John Bedini’s 1984 Free Energy Generator.

At the conference, the machine was running and producing a lot of mechanical work, but what was amazing is that it kept itself charged up the whole time!

It had a large three foot diameter flywheel that weighed about 800 pounds attached to an aircraft starter motor, which was battery-powered. The generator section charged a bunch of coils like a magneto, which sent this back to the battery running the machine.

Below is a diagram that John Bedini showed for his smaller prototype.


Between this image and some other diagrams – Jim Watson who had no electrical engineering background make it work.

Over the years, many people have tried and failed at replicating these claims. Very soon, we are releasing Bedini SG – The Complete Advanced Handbook. Included in this highly anticipated release are details about the Watson Machine that nobody has figured out in the last 30 years. And, the keys to making it work have been sitting right there in plain site!

There are already two books: Bedini SG – The Complete Beginner’s Handbook and Bedini SG – The Complete Intermediate Handbook. These are an absolute requirement to have in order to understand the basic working principles of self-regenerative energizers. And with the Advanced book coming, it will take everyone’s experiments and results to the next level!

You can see both books here: Bedini SG

Tesla Impulse on a Spark Plug

Since the 2014 Energy Science & Technology Conference, thousands of people have been studying the presentations released and some are even applying the information with real experiments.
 
Ignition Secrets was so popular because it gives simple step by step instructions on how to build a plasma ignition system.
 
What makes the Murakami Plasma Ignition so unique is that it allows anyone to use just about any off the shelf CDI (capacitive discharge ignition) or MSD (multiple spark discharge) unit and with simple modifications, turn it into a full blown plasma ignition system. Take note that the energy required to produce the spark in the left side photo is the SAME energy required to produce the plasma impulse on the right.
 
Many experts in both conventional and unconventional ignition systems have openly claimed that this modification cannot be done to these off the shelf ignition modules because a switch inside of them chops the capacitor off and on too fast, but once again, we’d like to show you that what the “experts” else says is impossible, we are able to actually demonstrate.
 
Watch this video of my car with an off the shelf performance ignition coil from MSD and a MSD DIS-2 capacitor discharge module for wasted spark ignition systems first produce the normally expected discharge at the spark plug and then watch as it produces the plasma impulse. That causes the capacitor to discharge at an accelerated rate at a negative resistance thereby giving an impulse of all that energy into a smaller unit of time, much smaller than is normally supposed to be possible, which massively amplifies the power right at the spark plug.
https://www.youtube.com/watch?v=l1XSzVG2ppA
That module and ignition coil are only for 4 cylinder wasted spark ignition systems, but MSD makes them for all kinds of engines and those that you see in the video are not even intended for Subaru engines but it works anyway.
Learn more about this amazing plasma ignition method at: Ignition Secrets

Tesla TV Series to be created by Bram Stoker’s Dracula Producer

TOPICS
  • TESLA TV SERIES
  • FBI RELEASES TESLA DOCUMENTS
  • BEDINI SG – THE COMPLETE ADVANCED HANDBOOK UPDATE
  • THE SECRET OF TESLA’S POWER MAGNIFICATION – LIVE CALL COMING
There is a lot of momentum right now with quite a few projects we’re involved with and we’ll touch on a few of them today.
 
 
TESLA TV SERIES
 
Fred Fuchs who produced Godfather III and Bram Stoker’s Dracula has agreed to produce a TV series called Tesla Man of Light! Stacy James Fry is heading up the campaign to make this happen. Here are details on Tesla Man of Light – make sure to watch both videos – the first is their introduction video and the second is an interview we did with Stacy, which answers a lot of questions about the whole project. http://emediapress.com/2014/10/02/tesla-tv-series-to-be-produced-by-producer-of-godfather-iii-and-bram-stokers-dracula/
 
Eric Dollard and others even have an opportunity to become consultants for this project as well as having their technologies shown in the actual TV episodes right on Tesla’s bench!
 
 
FBI RELEASES TESLA DOCUMENTS
 
In case you haven’t heard, the FBI has released quite a few Tesla related documents – go here for details: http://emediapress.com/2014/09/26/fbi-releases-tesla-related-documents/ 
 
 
BEDINI SG – THE COMPLETE ADVANCED HANDBOOK UPDATE
 
We’re still on track to release this highly anticipated Ebook at the end of October or the beginning of November.
 
This book picks up where the Intermediate Handbook leaves off and covers all of the major details and spin-offs from John Bedini’s life-time search for the best design of a self-running, electro-mechanical machine.After learning this material, you should understand enough of the science and method that John has shown to start experimenting with larger scale models which should lead to both self-running behavior and the production of enough extra energy to operate external loads.

 
Not only will this book focus on optimizing electrical recovery with a low drag generator, but it will cover some of John Bedini’s other technologies that have been released in the last 30 years.
 
For example, the famous “Watson Machine” was demonstrated at the Nikola Tesla Centennial conference put on by the Tesla Society in Colorado Springs in 1984 commemorating Tesla’s arrival to the United States 100 years ago. It was the largest version of John’s original Energizer shown in John’s 1984 book ever shown in public. Many people have tried to replicate this machine over the years but nobody has put all the pieces together even though it’s been in plain site all this time. 
 
In a few days, keep an eye out for another email from us with a link that will give you something to think about when it comes to the Watson Machine.
 
 
THE SECRET OF TESLA’S POWER MAGNIFICATION – LIVE CALL COMING
 
Jim Murray and Paul Babcock co-presented The Secret of Tesla’s Power Magnification at the recent 2014 Energy Science & Technology Conference.
 
This video shows Jim Murray demonstrating his SERPS technology that produces 20 times more energy heating resistors than the net draw from the power supply! That is 2000% more – https://www.youtube.com/watch?v=aDjWwoD83Rk
 
Here is an interview we did with Jim & Paul with their other SERPS demonstration that Paul Babcock replicated that shows almost 5000% more work done in lighting incandescent bulbs compared to the net draw from the power supply: https://www.youtube.com/watch?v=rP6fpN6avIc
 
Everyone who purchased their presentation will be receiving an invitation to a private live call so you can ask them questions about their presentation. If you already have a copy, make sure to confirm an email that says, “Confirm your subscription” because that puts you on the member’s list to receive the invite. 
 
If you don’t have a copy yet, make sure to get it because you don’t want to miss the opportunity to talk to these two Tesla tech geniuses: http://teslaspowermagnification.com
 
Sincerely,
Aaron & Peter
A & P Electronic Media
 
p.s. Make sure to get a copy of our FREE Solar Secrets e-book here: http://freesolarsecrets.com

Tesla TV Series to be produced by producer of Godfather III and Bram Stoker’s Dracula

Fred Fuchs, the producer of Bram Stoker’s Dracula and Godfather III agreed to produce an upcoming new TV series – Tesla Man of Light. Stacy James Fry heads up the campaign to make this a reality. Watch this!

Here is a recent interview with James Stacy Fry, which will answer more questions about this remarkable campaign that will help make Tesla a household name…

To help support this Kickstarter campaign, go here now and share this page and back it with whatever you can afford. There are some really awesome perks that you’ll get for your support! https://www.kickstarter.com/projects/1294927859/tesla-man-of-light-sci-fi-tv-series-graphic-novel

The only way this can happen is if we all pitch in. Make sure to share the campaign’s Facebook page and Tweet it to all your friends: https://www.facebook.com/events/616068948510680

Let’s make history!