Plasma Impulse Motor by Aaron Murakami, presents a novel way to power an inductor that appears to possibly have a reduced resistance/impedance effect in the entire circuit. This may prove out to show how to get a stronger magnetic punch on a coil thereby increasing its power so we can have stronger motors for the same or less electricity. It is also a 100% mirror image of the Gray Tube circuit, which is though by many to be THE Holy Grail of Free Energy since the output is astoundingly high compared to the input. If the inductor’s impedance is being reduced, even a little, this is a very important discovery in electromagnetic science. Release date – August 27, 2016. Learn more: Plasma Impulse Motor
Scotch Yoke Solenoid Motor by Aaron Murakami, Bob Teal’s Magnipulsion motor ran on a car battery and generated enough mechanical work to run a 20 ton conveyor belt for 6 months and the battery never went dead!
His motor used solenoid coils that when charged, they would pull an iron rod into them and these rods turned a conventional crankshaft. When the coils were turned off, he recaptured almost all the electricity and used it over and over and over. Despite the poor mechanical performance of the crankshaft that is just like the ones in most of our automobiles, he still had those profound results.
When I first learned about the Bourke Engine about 8 years ago, the most efficient gasoline engine ever developed, the reciprocating motion was turned into rotary motion with a very intriguing mechanism called a Scotch Yoke. While that yoke is not new and was not even new when Russell Bourke used it in his opposing piston engine, it helped to take his efficiency to levels that are claimed to be impossible. Instantly, I knew that marrying the Scotch Yoke mechanism to a Bob Teal type electromagnetic motor would be the ultimate combination and this presentation shows the concepts, timing mechanism and a masterfully built Scotch Yoke with iron rods going into solenoid coils with only a couple thousand’s inch gap!
The concept of putting these two things together is mine, Peter Lindemann who has studied the Bob Teal technology for years and is actually the inspiration for his variable reluctance motor that Eric Dollard tested at 108% back in the 1980’s came up with the timing mechanism, Ken Flanigan did all of the machining and Graham Gunderson is helping to design the driver circuit. For any of you that have wanted to see a collaboration between some of the presenters at the conference, this is it. What is presented is the history of the Bob Teal motor and how it relates to this project, where we are at with the project at the moment and where we’re going with it. Proceeds from this presentation will go to funding the rest of the project so we can open source it all and bring it straight to the people! Make sure to get a copy so you can learn about the most efficient way to turn reciprocating motion into rotary, which can pump water, drive you around town (scaled up) or other mechanical applications with the minimum amount of electricity. Release date – August 25, 2016. Learn more: Scotch Yoke Solenoid Motor
Paramagnetic & Diamagnetic Field Experiments by Professor Robert Haralick, Guy Obolensky & Loren Zanier – In this talk, we describe experiments by which the diamagnetic field by the bloch region and by the poles of a magnet may be measured using 3-axis Hall effect milligaussmeters, magnetoresistive milligaussmeters and sensitive differential electrometers. Our experiments provide evidence for the existence of a diamagnetic field and the vortex of the paramagnetic field. Experiments also reveal longer spinning times with a load than without and a loss of weight. Release date – August 23, 2016. Learn more: Paramagnetic & Diamagnetic Field Experiments
From Nanobubbles to Ball Lightning by Moray B. King – In an internal combustion engine the big anomalous energy manifests from microscopic ball lightning – not hydrogen combustion. This presentation shows many resources and academic paper references that are involved with the latest research in this field. You will also learn how you may be able to make your own nanobubbles using various methods of cavitation to create what just may be microscopic ball lightning in your engine. Release date – August 18, 2016. Learn more: From Nanobubbles to Ball Lightning
Electrical Transmission in Multiple Coordinate Systems by Eric Dollard – This is the sequel to The Extraluminal Transmission Systems of Tesla and Alexanderson. This is the deepest Eric Dollard has ever gone to develop the theoretical basis for longitudinal propagation, which is not subject to the inverse square law. There is also no velocity to its propagation and therefore no association to light speed. If you ever saw the classic Borderland videos on Tesla’s Longitudinal Waves, this presents diagrams, math and more information that you can ever hope for if you want to experiment with the analog Longitudinal networks on your own! Release date – August 15, 2016. Learn more: Electrical Transmission in Multiple Coordinate Systems
Sharing the Breakthrough Energy Message by Ken Rochon – How do you get the word out about a very important message to a lot of people? You create viral message campaigns using social media. Ken Rochon of The Umbrella Syndicate is able to capture the spirit of an event using his unique style of promotional photography, is an author of 15 books and has a humanitarian approach when working with organizations all around the United States. Release date – August 11, 2016. Watch this video FREE on YouTube below as well as 2 slideshows from the conference.
Bedini SG – Beyond the Advanced Handbook by Peter Lindemann – This is the first time John Bedini’s 1984 Kromrey Generator has been publicly demonstrated ever and the meters showed that the output was 200% compared to the input. And, the primary KEY piece of information to make it was has been fully disclosed! The Bedini SG that was demonstrated had a self-rotating battery system based on Bedini’s Splitting the Positive diagram and it recycled virtually all of the energy is used to run the energizer back through batteries to charge them up. The amp hours of running time that this energizer demonstrated was way more than the battery capacity can account for. A diode method was also shown that elicited way more radiant energy than the circuit and batteries could even handle, which teaches you that generating the radiant is not the issue because it has always been in the machine from the beginning – the real issue is how to safely capture it! The bottom line is that this presentation demonstrates that what was taught in the Advanced Bedini SG Handbook book is true. Release date – August 9, 2016. Learn more: Bedini SG – Beyond the Advanced Handbook
Open System Physics & Thermodynamics by Mike Waters – If you want to learn an argument that wins 100% of the time against conventional physicists who deny “overunity”, this is for you. You’ll also learn how Michael produced 12,000% MORE electricity from the wind compared to a conventional turbine – it’s so simple, you can build your own test units to see what they produce! He also goes into graphene, cavitation and many other concepts including sharing his vision of a personal transport vehicle that could eventually have an unlimited range. Release date – August 5, 2016. Learn more: Open System Physics & Thermodynamics
Magnetic Implosion Transformer by Graham Gunderson –This presentation shows a solid state transformer invented by Graham that measured out at 570% more output than the input he had to pay for at a live demonstration. He can even dial the input down so the input goes negative, which means the COP (coefficient of performance) is infinite (ratio between intended work compared to input we paid for. These measurements were validated by multiple methods that all corroborated with each other. Release date – August 3, 2016. Learn more: Magnetic Implosion Transformer
Fundamentals of the Transforming Generator by Jim Murray – This astounding machine demonstrates many principles that are not understood by conventional science. It rotates but creates a square wave output, with positive feedback – it speeds up to self-destruct speeds, which you normally only see in science fiction movies but this is the real thing, it can light mercury vapor lamps at 200-300% more lumens per watt among other mind-bending feats! For the first time ever, Jim Murray discloses the inner workings of this machine to the public and even describes how someone can replicate it by modifying an off the shelf motor. Release date – August 1, 2016. Learn more: Fundamentals of the Transforming Generator