All posts by Aaron Murakami

The Boy Who Harnessed the Wind

The Boy Who Harnessed the Wind is an excellent movie about a 13 year old Malawian boy named William who is living in a village that is facing a famine. His deep burning desire pushes him to learn what he needs to in order to cobble together a wind powered generator that powers a pump and saves the village.

I just watched this the other night and although it is extremely rudimentary, its a great story about desire, innovation and spirit. Every young child has something to learn from this as it is a story of determination and commitment, which is obviously important for their character.

This story is based on a book of the same name and a young-reader’s edition is available here: The Boy Who Harnessed the Wind

It would make a great gift for any school-aged child.

The movie is a Netflix Original so is most likely only available from Netflix. The link to the movie is here: https://www.netflix.com/title/80200047

 

Spokane Smart Meters – How to Opt Out

Smart meters are a hot topic these days mostly in regards to whether or not they are safe. Itron is one of the largest manufacturers of smart meters and they happen to be right here in Spokane. Avista is our local power company – used to be Washington Water Power years ago and they are now updating the power poles in various neighborhoods to accommodate the new changes. The light colored pole in the picture below is the new ones being installed next to the old one. The old ones will be removed at some point.

Whether or not smart meters are really a health hazard is one issue and whether or not you should have a choice in accepting one is another. It is a fact that smart meters have burned homes to the ground as well as other issues that are highly documented. As a matter of fact, there are entire regions such as in Canada that have outright banned them because of their dangers.

Here is a free viewing of the award winning documentary Take Back Your Power so you can see a few of these documented problems with smart meters:

To learn more about this video and about Josh del Sol’s work regarding educating the public on these matters, go here:

Take Back Your Power

If you happen to be in Spokane, Washington, Avista is actually making is simple to opt out from having a smart meter installed on your home. I’m definitely opting out because regardless of anyone’s opinion to the contrary, it is an indisputable fact that smart meters have never undergone testing to prove they are safe!

Here is Avista’s page with the instructions on how to opt out: https://www.myavista.com/about-us/energy-innovations/smart-meters-opt-out

I’m posting the pertinent info about the opt out option here for convenience. The form is here and it will cost you $5 per month: The opt out form is here: https://www.myavista.com/-/media/myavista/content-documents/smart-meters/noncommunicatingdigitalmeterrequestform.pdf

How to opt out

If you choose to opt out, the Washington Utilities and Transportation Commission (WUTC) approved the following qualifications and charges that will be added to your Avista bill:

  • A $5 ongoing monthly fee to cover some of the cost of manually reading a residential non-smart meter
    • Note: The $5 ongoing monthly fee is waived for income qualified customers
  • A one-time $75 fee if you choose to opt out 31 days after a smart meter is already installed
  • Residential customers who live in a single-family home or a multi-plex with four units or less qualify for opt out. The request must be made by the Avista customer of record (family members, neighbors or landlords cannot act on behalf of another customer).

For your convenience, there are multiple ways to opt out of receiving a smart meter:

The opt out form is here: https://www.myavista.com/-/media/myavista/content-documents/smart-meters/noncommunicatingdigitalmeterrequestform.pdf

  • If you meet the qualifications, please complete and sign the application form and submit it to Avista.
    • Scan or take a photo of it and email it to optout@avistacorp.com
    • Mail it to Avista at:
      Avista Utilities
      Attn: Opt Out
      1411 E. Mission Ave.
      Spokane, WA 99202
    • FAX it to Avista at 509-777-9650
  • We must receive your signed form in order to formally complete the opt-out process. If we don’t receive your completed and signed form, it may result in you receiving a standard smart meter.
  • You may also contact our Call Center at 1-800-227-9187 and one of our representatives can assist you.

Here are the benefits claimed by Avista:

Feature or benefit Smart Meter Opt Out
24/7 Access to Usage Information Yes No
Bill-to-date trend chart Yes No
Projected next bill Yes No
Remote service capabilities Yes No
Automatic outage detection Yes No
Ongoing monthly fee Included $5*
One-time fee if you opt out 31-days after smart meter was installed Included $75

*Ongoing monthly fee is waived for income qualified customers

24/7 access to info? I already know what my usage is at any time and so do most people. They may not know how to calculate it, but they know what is drawing electricity. Bill trends? Any adult that has experience paying bills already knows what they are paying and what they will expect to pay on their next bill. Remove service capabilities? How many of you go on vacation and the first thing that pops into your mind is – “Gee, I wonder how many kilowatt hours of electricity my home is drawing?” – NOT. Automatic outage detection? When my lights go out, that tells me my power is out faster than any smart meter can. Also, if I’m away, my neighbors know and will call or text me so I can have someone come over and plug my refrigerators into my backup battery bank. And I have to pay $5 per month for being someone that uses common sense and isn’t relying on being glued to some website or app that is supposed to make my life easier but doesn’t?

Share this with your friends with the buttons below – they have a right to know!

Make sure to read this next!

Smart Meter Danger

Tesla’s Magnifying Transmitter: Recreating Tesla’s Dream

Ernst Willem van den Bergh is a member at Energetic Forum who has shared some of his work in the Tesla sciences. Here is the thread that prompted me to get a copy for Eric Dollard and myself: Tesla’s Rays

When recently talking to Eric about this book, he indicated that Ernst has shown two very specific things that he believes nobody else has shown. Eric may discuss these two items on his next live call coming up on March 17th.

Here is a description of this book that any Tesla fan should get in their hands:

“This book is the result of more than a decade of theoretical and experimental research. It sets out to answer questions about Tesla’s Magnifying Transmitter. What is it? What does it do? How does it do so? Does it really provide free energy? These questions and more you will find answered in this comprehensive book. Every fact you will see backed by Tesla’s own words. Quotes of all relevant articles, lectures and patents have been included. More than that you will read about my own experiments, copies of Tesla’s and their results. This book is divided into 3 parts and every part concludes with a summary in layman’s terms so that everyone can understand what it is that Tesla wanted to give the world and how it was intended to work. Needless to say that this book is a must-read for every Tesla enthusiast and everyone who wants to understand the work of Nikola Tesla, a genius far ahead of his time. With the purchase of this book you are supporting my work to bring back Tesla’s Magnifying Transmitter, and for that I thank you!” – Ernst

Get your copy here: Tesla’s Magnifying Transmitter: Recreating Tesla’s Dream

Ernst’s bio is here:

Born 1964 in Amsterdam. I always wanted to figure out how things work. I was repairing all things electronic in my teens, taught myself digital electronics and designed and built my first computer when I was 18. I went to University to study computer science and physics and worked in IT until 2005. Then I moved to Thailand and while looking for a new hobby I came across Tesla. I have collected all his works (as much as available) and started replicating his experiments so I would see what he must have seen.

In 2014 the voltages became too high for living room experiments and together with an ex-colleague we started Ethergy Co. Ltd. to attract funds for a lab and equipment.

We have since proven, among many smaller things, the 11.77 Hz Earth resonance frequency and that Tesla’s Magnifier generated extra current. So far we have not been able to produce excess energy, but I think that is just a matter of time.

Please use the share buttons below to help share this with your friends. Ernst deserves to have his work recognized and we are fortunate that he is willing to share it with us!

6000% Overunity Cylindrical Sail Technology

The cylindrical sails you see in the picture above go back 100 years and were invented by a German Engineered Anton Flettner are are based on the Magnus Effect.

The Magnus Effect is where air flow over a round object will have an uneven flow over the shape so that there is a faster flow on one side than the other and similar to the Bernoulli Effect that allows an airplane to fly, the Magnus Effect can produce an asymmetrical thrust.

Here is an animated Gif showing how it works:

For this effect to work on a ship, electricity is used to rotate these cylinders and as the wind blows past it, a unidirectional thrust is created that helps to propel the ship thereby reducing it’s fuel consumption.

Here is the claim: “The 240 metre-long Maersk tanker will be retrofitted with two modernised versions of the Flettner rotor that are 30 metres tall and five metres in diameter. In favourable wind conditions, each sail can produce the equivalent of 3MW of power using only 50kW of electricity. Norsepower expect to reduce average fuel consumption on typical global shipping routes by 7% to 10%, equivalent to about 1,000 tonnes of fuel a year.”

That’s not a misprint – 3 MEGA WATTS of power is created using only 50 KILOWATTS – that is a COP of 60 times or 6,000% gain compared to what the operators of the ship have to input. Of course, none of this violates any laws of physics since it is an open system and the wind is free environmental input, which is simply being leveraged from very little input.

Congratulations to Norsepower for being open about what it is able to accomplish and to Maersk for allowing this to be implemented on a tanker.

Full story is here: http://theconversation.com/spinning-sail-technology-is-poised-to-bring-back-wind-powered-ships-74872

Copper Turns into “Gold”

A few months ago, an article was released in Science Advances describing how Chinese researchers turned copper into “gold” by blasting it with hot, charged argon gas.

This blasting process knocks off the copper atoms, which are then collected as a very micronized copper sand that has very different properties. This modified copper dust is used as a catalyst to turn coal into alcohol.

While the copper did not actually turn into real gold, it has the same catalytic properties of precious metals such as silver and gold. It also resists oxidation and high temperatures.

The implications are potentially very large. Gold and silver are used in electronics, but of course is very expensive but if copper can be made to have catalytic or electrical properties that are similar to gold or silver, it could be a game-changer.

The full article is here: https://www.scmp.com/news/china/science/article/2179209/chinese-scientists-turn-copper-gold

 

Hutchison Effect Artifacts Available

John Hutchison who is known for the “Hutchison Effect” is making his collection of rare artifacts available for sale through Ebay.

The Hutchison Effect is the result of mixing some high frequency, high voltage effects and transmitting them into metal. This also is related to some anti-gravity demonstrations where objects lose weight and levitate upwards by this same effect. Some metal turns to jelly, some metal appears to have occupied the same space with another object and then solidifies into one piece and other strange effects including transmutation of elements.

This has been studied by many independent labs and even the U.S. Military has studied this without a satisfactory explanation even offering up the possibility that John Hutchison is causing these effects with some unintended or unknown telekinetic ability.

John is trying to raise the funds for something he recently acquired overseas (possibly details on that coming later) by making offering up these samples for sale as well as a lot of his electronic equipment. The collection is available here: https://www.ebay.com/sch/m.html?_ssn=johnkhutchison&_ipg=200&rt=nc

You can learn more about some of John Hutchison’s work at Energetic Forum: https://www.google.com/search?client=firefox-b-1&q=site%3Aenergeticforum.com+hutchison+-redirect-to

Survey – What new products should we make available first?

Please take a moment and let us know what new products you want to see available first – ballpark estimated pricing is listed in the descriptions. We have quite a few production ready prototypes ready to be manufactured so please be as accurate as possible when ranking each according to the 10 star options.

1 star = no interest, you don’t want one
10 stars = very high interest, you want one right away

This is identical to John Bedini's RPX Sideband Generator, which is one of only a couple legitimate Rife Frequency machines manufactured anywhere in the world. We have these at http://sidebandgenerator.com The 2.0 version will have a switch that allows you to turn the pumpwave off and on. The pumpwave is a low frequency "carrier" that helps the high frequencies penetrate. All electrode delivery "Rife machines" on the market that do not have a pump wave are phony replications, which means 100% of them are phony since only we have the pump wave incorporated. Without it, the frequencies just trickle over the surface and do not penetrate. With the pump wave on, that is intended for electrode delivery. With it off, it is more intended for electromagnetic delivery by a pancake coil. All original RPX units that have the pumpwave can still be used with a pancake coil so this is just a feature that will be available at the same or similar cost. For more info, research http://sidebandgenerator.com - estimated price by itself will be about $425-$450 USD - the Combo unit is only $650 right now and that also includes a battery, signal generator and cables.
The RPX by itself is around1.5 to 2 watts and outperforms units 10 times the power because of how the pump wave allows the high frequency sidebands to penetrate with electrode delivery. We are considering releasing a 10 watt amplifier that will boost the RPX output power by 5 to 7 times. That is way too strong for electrode delivery so will most likely be hardwired to a tuned pancake coil for electromagnetic transmission. These will be available through http://sidebandgenerator.com Estimated price $400 to $500 ballpark and will probably include the pancake coil hardwired to the amplifier's output.
One of John Bedini's most popular battery chargers was the S3A12, which was a 3 amp 12 volt solar charge controller. It is a linear current regulator circuit that pushes straight DC current to a battery and like all of John Bedini's battery chargers, they get the batteries to the true topping voltage, which no other commercially available chargers accomplished at the time. The S3A12 was perfect for the 45 watt Harbor Freight amorphous solar panel kit, which was low cost, low light but the charge controller of course left batteries in a chronically undercharged condition like all the rest. John made me a prototype S5A12 since I wanted one that was more rugged for 50 watts and a bit more and it tested out perfect but they were never released to the public as a replacement to the S3A12. These will be available at http://teslachargers.com Estimated price will be around $200 - you can get 5 amp 12 volt solar charge controllers on the market for $30-75 but keep in mind that your batteries will be chronically undercharged so what you save on the controller, you will wind up paying more on replacement batteries.
I'm not sure of the max capability of this charger, but it is for higher power applications. It appears to be the most efficient one he has ever built and he said it was the best one he ever came up with. If we release this, it will probably be around 250 watts capability at 12 volts - 24 volts is not on the radar yet. So, it will be intended for up to 20 amps of solar. These will be available on http://teslachargers.com Estimated price? No idea $300-500 ballpark estimate but could be way off. Same as the S5A12, you cand find less expensive 20 amp 12 volt solar charge controllers, but what you save on the controller you will be spending on batteries since they'll never be charged correctly.
This is the famous 2A12 rejuvenator that outperformed many chargers many times its size. Generation one years ago started as an inductive spike charger which charged a coil, turned if off and the collapsing magnetic field sent the high voltage potential to the battery. It worked great but batteries charged like that become less or non-compatible with conventional normal hot current chargers. Generation 2 and 3 were cap discharge, which worked wonders and allowed the batteries to be compatible with all conventional chargers. Gen 4 was also a cap dump but was a little less aggressive than Gen 3. Gen 5 was the latest one released and was essentially a upgraded version of the Gen 3 and it was called the S2A12-EX for Extreme version. The EX version was very powerful but it was also a bit too aggressive and sometimes pushed batteries a bit too hard. If we re-release the S2A12, it will be the Gen 4 version, which is a bit milder than the EX model and will be available at http:/teslachargers.com Estimated price $275-350 - again, low cost chargers will cost you more in batteries over time. We have thousands of customers around the world that saved a fortunate with our chargers/rejuvenators.
I have 20 years experience with light therapy devices and a medical doctor and Qigong master I worked with in our company years ago were close associates with the aerospace engineer who made the first ever Red LED device intended for healing purposes back around 1981 - the true pioneers. The Nogier frequency set is by far the most documented and proven method of delivering pulsed Red and Infrared light therapy devices for people and animals but I certainly don't want to limit anyone to my own experiential beliefs. With the RPX combo set, it comes with a battery and signal generator already and want I want to offer is a device about the size of the RPX, which is a RED/Infrared therapy device that can operate on the exact same battery and signal generator that comes with the RPX. Therefore, it will start to become a Universal system so nobody has to keep buying new gadgets here and there and it will save them a lot of money and time. For years, I've seen the light therapy market increase in its knowledge but it has also taken a nose-dive in terms of integrity where people are outright getting ripped off for what are literally glorified flashlights that may or may not be pulsing. You can get a red light panel for growing plants for around $40 online but as soon as they associate therapy benefits to it, they're charging 10 times that much for an even smaller panel and this has bothered me for years. My goal is to offer you a superior product in quality and versatility - with the signal generator, you'll have infinite flexibility - while being able to undercut the pricing of so many companies that are involved in price gouging - and still make a fair profit. This may be available on http://sidebandgenerator.com or another site that is under construction where all devices may be under as an umbrella site. Estimated cost $200-400 ballpark
The Abrahm's Oscilloclast was the final form of Albert Abrahm's electrical healing devices. Although some frequencies were determined radionically, it is a RF burst generator that creates a very specific waveform. John Bedini was the leading authority on this device, had originals and had created many circuits that 100% replicated the original machine. You can learn more here (copy and paste this link into a browser) https://borderlandsciences.org/journal/vol/25/n02/The_History_and_Development_of_Radionics_V.html. We do not make healing claims nor would we sell this as one. Instead, we are interested in offering a device that is a 100% correct electrical reproduction of what Abrahm's Oscilloclast produced for study and to further the education in this field. That's it. The original machines are priceless but there are hardly any left. John had several variations that he created that replicates the Oscilloclast's output and that is what we intend to make available for study. This will be on a website that is under construction that is dedicated to devices rather than information. The estimated price may be $500 to 1000 ballpark.
There are several specific Bedini SG and related models and kits we're interested in putting into production. No overunity claims - just for educational purposes only but you make your mind what you want it for. We will probably offer some smaller and less expensive models first so that beginners can more easily get their wheels spinning, faster. No pricing estimates yet but for small simple kits that we have in mind, probably less than $250.
Circuits that will rotate batteries between front and back of a Bedini SG type system of a "3-Battery" type system.
My plasma ignition system can instantly dissociate hydrogen from water or hydrogen from a hydrocarbon fuel on contact. It has been awarded a US Patent so I can produce full or partial kit systems. The easiest system is for older distributor type of ignition systems but there are ways to do this for newer Coil On Plug systems. The science behind this is explained in my book and video at http://ignitionsecrets.com and I'm open to putting something related to this ignition system into production.
What other products would you like to see? Most of the above we already have production ready prototypes ready for production but want to know what you're most interested in. Please let us know in this box what else you would be interested in having available? A free energy machine that will power your home is not an option. All overunity demonstrations at the conference and elsewhere have been smaller proof of concept designs and for the cost of a very large scaled up version that could power your home, for much less, you could fully power your home with solar and we're more interested in what is practical to those ends. Out of anything you have seen at the conference, on the forums, etc. what would you like to have access to?

Shell’s 107 MPG Concept Car

Shell introduced a 107 MPG car but are they moving forward or backward?

Not that long ago, they developed this, which you can see in the following video:

Their focus is on how much emissions are reduced over the lifetime of the car or at least that is what they want the public to focus on. This is like Elon Musk’s solar panel roof tiles that gets a pay back over decades. If you want an extremely long-term return on investment, it seems like a good idea, but in the modern rush-rush world, it seems unlikely that the average person wants to wait that long or can afford to wait that long!

That isn’t the only issue with this new Shell concept car that gets 107 MPG. ROI is one thing, but MPG is another and is more immediate. 107 seems impressive although small diesel Volkswagens in Europe have been developed with MPG capability that is close but they never make it here to the states because of the excuse is that there is no demand for that kind of car in the American market. Really???

If you can look past Shell’s nonsense about how much emissions are reduced over the lifetime of the car, here is what Shell developed back in 1973 – an Opal that achieved 376 MPG!!

http://www.376mpg.com/

That is 3.5 times or 350% MORE MPG than the new 107 MPG concept car.

Here is a video shoot of the car intended for Dutch television:

Although this Opel had a very small carburetor and the engine bay was modified to contain all the heat as well as many other considerations, it proves the point that the bottom line is that 45 year ago, they achieved nearly 400 MPG!!

In the book Fuel Economy of the Gasoline Engine, on page 223, this 376 MPG Open is described: Fuel Economy of the Gasoline Engine

So, are we making progress? Are we there yet? 107 MPG in the last few years or let’s go back to 1973 where they already achieved 376 MPG – it’s up to you to figure out if we’re moving forward or we’re simply the butt of a joke.

And what does this page say? https://www.shell.com/energy-and-innovation/the-energy-future/future-transport/shell-concept-car.html

Shell is not intending to take this car into commercial production. Instead, we alongside our partners, see it as a conversation starter: a way to accelerate the dialogue about how we make road vehicles more energy efficient and less carbon-intensive. ” – SHELL

So not only is Shell willing to tease us with a 107 MPG car that gets a bit more than 1/4 the MPG than what they achieved in 1973 – nearly half a century ago, they have no intention of allowing you to have it since the only thing it is supposed to do is accelerate the dialogue. With that trend, in another 46  years, they’ll be convincing you that 25 MPG is a really big deal!

To be fair, Shell isn’t the only one playing games – years ago, Chevy had a commercial talking about the revolutionary 35 MPG breakthrough technology, which is years after many other cars far surpassed that level.

And look at Honda – in the early or mid 1990’s, they had a Honda Civic VX that could get 50-55 MPG – every model since then has achieved about 20 MPG LESS than what they were getting nearly 30 years ago!

In the late 70’s and early 80’s Volkswagon had the Golf and Rabbit diesels that were also getting 50-55 MPG and those went by the wayside as well.

Who knows what it will take to get forward progress rather than 2 steps forward and 3 steps back – but in any case, the oil and auto companies have proven themselves to be consistent in one thing and one thing only – and that is the fact that the technology has nothing to do with advancement because if it did, we’d all be driving cars getting hundreds of miles per gallon. It is obviously political and financial and whatever mile per gallon you achieve in your vehicle is made possible only because they dial in exactly what mileage they allow you to have  rather than giving you what they are capable of providing.

Some may be skeptical in thinking that this is just some conspiracy theory but whether my reasoning is accurate or not is irrelevant – the historical facts speak for themselves so you must come to your own conclusion as to why it’s taken over 40 years for Shell to demonstrate a car that gets a bit more than 25% of the mileage they achieved back in the early 1970s. Mileage is increased then decreased and increased and decreased and this pattern has remained for many, many decades.

Please share this story with your friends and ask them to do the same. We deserve better than this and everyone deserves to know the truth. One thing is for sure, they invented a new definition for the term Shell Game!

Geoffrey Miller to Present on World’s Largest Newman Motor

At the 2019 Energy Science & Technology Conference, Geoffrey Miller will be presenting on a massive Newman Motor that he recently built. He’ll also be disclosing a very * RARE * device invented by Joseph Newman that most Newman fans have never heard of. There will be a demo of this device and all details necessary to replicate it will given!

There are only 150 seats available for the 2019 Energy Science & Technology Conference and they’re going to be sold out months before the conference – register and get your tickets now: 2019 Energy Conference

LOOK AT THE SIZE OF THAT ROTOR!!

Here are the details: NEWMAN’S 10,000 LBS MOTOR IN 2019 & DEMONSTRATION AND EXCLUSIVE FULL DISCLOSURE OF RARE NEWMAN DEVICE – The 2019 talk will be on the NEW 10,000 lbs Joseph Newman Motor built by Geoffrey S. Miller at Energybat Labs. In 2017, he gave a talk about the Newman Motor and a small demo of the motor. This year, Geoffrey Miller will go into a whole new level with the new 10,000 lbs motor. The talk outline is below.

1. History of Newman’s big motors.
2. Who maid the new 10,000 lb. motor
3. Why make a 10,000 lb. motor?
4. What it takes to make a motor this size.
5. What the motor will do.
6. All parts of the motor.
7. All motor data.
8. Power in & Power out.
9. Motor running parts of the lab.
10. Videos of the motor running.
11. Hand out data.
12. Q & A session.
13. A live demo will follow the talk about a Newman device.

It is recommended that you get a copy of Geoffrey Miller’s presentation from the 2017 Energy Science & Technology Conference, which will lay the foundation for the upcoming talk: NEWMAN MOTOR DISCLOSURE

Dr. Ronald Stiffler – Thank you!

Dr. Stiffler - Spacial Energy Coherence (SEC)
Dr. Stiffler – Spacial Energy Coherence (SEC)

Dr. Ronald Stiffler was a very passionate researcher who loved to teach and share his work. He was known for his work with circuits that he dubbed SEC or “Spacial Energy Coherence“, which came in all shapes and sizes and they powered LED arrays as well as creating various forms of hydrogen gas from water – but they also had other applications.

Over the years, we corresponded mostly outside of Energetic Forum where he contributed much of his work and due to some health challenges, he was unable to be as active as he wanted to be.

Unfortunately, I just learned that he passed on last November 2018 in Humble, Texas. At one time, he actually lived in Cheney, Washington, which was only 20 minutes from my home in Spokane, Washington.

You can find some of his work at the following links – Dr. Stiffler has 950 posts in http://energeticforum.com:

http://www.energeticforum.com/water-fuel/5372-dr-stifflers-slow-burning-water.html

http://www.energeticforum.com/renewable-energy/9717-dr-stiffler-sec-replications.html

http://www.energeticforum.com/renewable-energy/3934-high-voltage-thin-air.html

http://www.energeticforum.com/general-discussion/8343-water-trouble.html

http://www.energeticforum.com/general-discussion/7323-sec-exciter-kills-rfids.html

There are more threads he posted in – some he started and many are discussions started by others. I left out threads that dealt with end-of-the-world scenarios, which Dr. Stiffler was deeply concerned about – the downfall of America caused by the Globalists. He was very open about it and shared his opinions openly in the forum.

You can find an archive of two of his old sites here:

https://web.archive.org/web/*/stifflerscientific.com

https://web.archive.org/web/*/drstiffler.com

You can find a little over 160 videos he posted on his work that are still available on YouTube here: https://www.youtube.com/user/StifflerDr/videos

Thank you Ron for all your contributions – it was an honor to know you!