In 1831, Michael Faraday invented the Faraday Disc Generator. It was a simple copper disc rotating between 2 magnetic fields that were perpendicular to the conductor. It worked, but had efficiency problems with current moving in opposite direction away from the magnetic field as well as other issues.
Around 1977, Bruce DePalma invented the “N-Machine”, which was not predicted by Faraday or Maxwell as it had the magnets FIXED to the conductor and they rotated together – something that is not supposed to work but it does.
N-Machine
Today, there is still no satisfactory answer as to why it works and the conventional explanations fall flat.
DePalma’s presentation is available here as part of a large collection of videos called Classic Energy Videos
Later on Adam Trombly enhanced DePalma’s N-Machine and was given two gag orders by the Pentagon. Fortunately, the patent applications had already circulated world wide and Paramahamsa Tewari had replicated Trombly’s machine and to this day, they are still moving this technology forward.
The above mentioned machines of DePalma, Trombly and Tewari are legitimate “overunity” machines where more electricity can be taken from it than is required to run the prime mover.
The problem with many of these related machines is that they output a lot of current, but there is hardly any voltage. The voltage is so low it will be in the millivolts and to get anything in the couple volt range requires very large setups with very high RPM’s.
At the 2017 Energy Science & Technology Conference, I’ll show the simplest and most elegant innovation to the N-Machine concept that has allowed me to charge a capacitor to 18 volts DC and the magnets are only 2 inches in diameter and they were spinning at only 2000 RPM at the most. This is a world’s record and is something that I came up with many years ago.
I’ve experimented with it off and on over the last few years and proven it to work indisputably and it is so simple that everyone will be wondering why nobody else has every figured this out until now.
This presentation will be the first presentation Saturday morning at the energy conference. All the seats are sold out, but the presentation will be released in the A & P Electronic Media catalog not too long after the conference.
Paul Babcock is a leader in advanced electromagnetics and is the inventor of the most effective switching technology in the world. With his patented switch, you can recover almost all electromagnetic losses and put them back to the front of the circuit to reduce your net input.
It was about 12-13 years ago when I first met Paul and his shop was at his home garage where together with his team, the circuit and motor was developed, which has no back emf – it is only a motor and does not generator against itself!
We are fortunate to have had his as a presenter at all our conferences and this year, he will be delivering a very interesting and important presentation. Below is a short letter from him:
The Universal Medium – As taught by the Great 20th Century Profits
Hello Folks – It has been quite a year of discovery since the 2016 Energy Conference. A long string of synchronous events that began at the 2016 gathering inspired me to spend last winter building a Multiple Wave Oscillator to study the works of George Lakhovsky. I had little knowledge of Lakhovsky before the 2016 Energy Conference when synchronous events; that started out as helping friends in dire medical straits turned into a journey over the last year that has lead to places I did not expect. I am going to share this journey with you at the 2017 Energy Conference.
During my lifetime I have intensely studied the works of many great minds and inventors whom I consider 20 century profits; Nikola Tesla, Wilhelm Reich, Walter Russell, many others and now George Lakhovsky.
All of these great minds were working with the same universal medium; referred to as Radiant Energy, Orgone Energy, Either Energy and many other names. Over a lifetime of reading the works of these great men and spending countless hours experimenting and reproducing their objective works I found the threads that weave through this great collection of objective works and theories.
This journey that started with the 2016 Energy Conference brought to me a new level of practical understanding that exposes the working theory threads that wind their way through the great works of the 20th Century profits. All of the inventions produced by Tesla, Reich and Lakhovsky are designed around the same theory and principles to achieve a number of different ends.
Tesla desired to bring limitless energy to mankind using the universal medium. Lakhovsky desired to create beneficial energy fields that would eliminate disease and optimize health for mankind. Reich uncovered the workings of the biosphere and life as manifestations of the universal medium.
The operating principles of the universal medium are consistently the same in all of the works produced by the great 20th Century profits.
I will share the discoveries that have emerged over the last year with you during my presentation at the 2017 energy conference. I will share as much as time allows for.
To all the good folks I must apologize for not sharing more on the website and blogs over the last months but between work demands and tools my hands give out and it is hard to keep up. Sitting and working behind the computer reminds me of the cowboys I knew as a kid who rode fence line on the ranch. Hunched sore backs, sore butts and cramped up hands. I’m just not as tough as I use to be.
Don’t let the fear mongers and war mongers scare you, the feudal lords and their minions are far more scared of you. Why they fear us is that we, meaning the people who make everything and pay for everything have risen above fat kings, corrupt priesthoods and crooked merchants with goodwill and good works. Common men have developed enough wisdom and compassion to embrace a new level of human ability; leaving the parasite class behind. All the ugly efforts and death and destruction and manipulation that have been heaped upon humanity for 6000 years are ending and there is nothing the feudalists can do to stop humanity from achieving its birthright. The feudalist’s nightmares have come true!
See you at the Energy Conference in Hayden, ID this summer in July!
Paul Mario Babcock
There’s only 3 seats left, which will probably be sold before this link goes live, but you can try to register and pay for your ticket if you’re feeling lucky: http://energyscienceconference.com
Here are some interviews with Paul since the beginning of our conferences so you can learn more about what his work is about:
To go deeper into Paul Babcock’s magnetic recovery and other related principles, we highly recommend that you add the following presentations to your library:
Magnetic Energy Secrets Parts 1, 2 & 3Babcock DC Motor Disclosure
Al Francoeur has been involved with energy technologies since the 1980’s and is the inventor of several interference generators that operate with reduced back emf.
He is the owner of several E.V. Gray Motors that were later converted to run conventionally. There are some clues in these motors and an original power supply, which appears to have never been tampered with. Al has found a few clues as to the original operating method and will be sharing his perspective on these aspects of the Ed Gray Motor technology at the 2017 Energy Science & Technology Conference.
Mark McKay is a researcher that has traveled the country visiting Ed Gray’s family, friends, engineers, etc. and has revealed his historical findings in these presentations: https://emediapress.com/shop/real-history-ed-gray-motor/
Al’s presentation will be a perfect companion to Mark’s presentations and will be released after the upcoming conference.
Come meet Al Francoeur at the 2017 Energy Science & Technology Conference – there are only 8 seats remaining: http://energyscienceconference.com
Joseph Newman is a legend in the Free Energy field and is one of the pioneers of the movement. Geoffrey Miller of Energy Bat Labs worked with Newman for about 10 years in the last 80’s and early 90’s and is one of the few people that ever gained Newman’s trust.
Geoffrey was the one who helped guide Newman’s Energy Machine construction so that they developed more torque and were simply built better. Newman was not much of a builder but more of an intellect.
Newman died of a heart attack about a year ago but his secrets will not go with him. Geoffrey Miller will be giving an exclusive disclosure at the upcoming 2017 Energy Science & Technology Conference and will show the CORRECT way to build a Newman Machine.
Out of all the videos and websites showing “replications” of Newman’s Motor, only ONE video has ever shown the correct way and it was because the builder actually comprehended what Newman had written in his book, The Energy Machine of Joseph Newman.
Here are a couple pictures of Joseph Newman and Geoffrey Miller sitting at a McDonald’s when Geoffrey first met Newman. And there is a short letter by Newman giving praise to Geoffrey “Jeff” for helping to bring his technology out to the world. I don’t know of anyone other person that Newman ever gave this specific credit to!
Geoffrey Miller – Newman MachineJoseph Newman thanking Geoffrey “Jeff” MillerGeoffrey Miller & Joseph Newman at McDonald’sGeoffrey Miller & Joseph Newman at McDonald’s
Come meet Geoffrey at the 2017 Energy Science & Technology Conference to be a part of this historical disclosure!
SHARE THIS ON FACEBOOK AND TWITTER BELOW – SPREAD THE WORD THAT THE DISCLOSURE ON THE NEWMAN MACHINE IS COMING SOON!
For many decades, Coral Castle built by Ed Leedskalnin has been a mystery with speculation that free energy and anti-gravity technologies have been involved with the construction.
This video documentary is created by Scott Russell and is by far the most sensible explanation as to how Ed Leedskalnin actually built Coral Castle.
It’s a bit disappointing that there isn’t more of a mysterious energy source of technology behind it so it takes a bit of fun out of it, but if Scott Russell’s analysis is even half correct, it is still a very profound piece of work.
This video has been online for a couple years now and I only just now came across it and wanted to share it with you. It is still an engineering marvel and the methods that Ed Leedskalnin used are no less amazing – if this is indeed how he did it.
This video is only about 25 minutes long and is well worth the time it takes to watch it. I think you’ll have to agree that it certainly looks like Russell may have nailed it – we’ll never know 100% for sure, but it certainly appears pretty close.
If you want to see some of the interesting speculations and discussions on Ed Leedskalnin and his work over the years at Energetic Forum, check this out: Ed Leedskalnin
Here is a short video with Tom Childs of TeslagenX and myself (Aaron Murakami) discussing what we are doing in the near future to continue the legacy of John Bedini’s work.
John Goodenough is one of the original developers of the lithium ion battery. Recently, he has been involved in developing some battery technology that has 3-10 times or greater the energy density of lithium ion batteries. And, they’re very safe, non-toxic, and can be charged REALLY fast!
“Cost, safety, energy density, rates of charge and discharge and cycle life are critical for battery-driven cars to be more widely adopted. We believe our discovery solves many of the problems that are inherent in today’s batteries,” Goodenough said.
These batteries can also be made at a much lower cost since sodium can be used instead of lithium, which is in massive abundance in sea water. The electrolytes in this battery are actually made of a solid GLASS and is changing the way batteries and electricity are looked at.
Here are 2 video tributes to John Bedini where he discusses Rife’s technology on the Jeff Rense show. Thanks to Davy Oneness for creating this video tribute!
The latest update on John Bedini’s knowledge regarding this technology is available at http://bedinirpxbook.com
There may be more of these coming! Seattle has a huge population so many people will have an opportunity to learn more about what our community has been up to. If you know anyone in the Seattle area, send them these links. Of course, you can watch these online from anywhere.
