RS Stafford is a long time researcher in the energy sciences and knows more about John Bedini’s work than most. He is blessed to have been able to acquire John Bedini’s 6 coiler SG and the large Ferris Wheel Motor.
Here is the goal and why we need your help to raise some donations:
Investigate John Bedini’s Ferris Wheel Hub Motor and Mag amp Motor to get a better handle on how this Tech works. Map out the Magnetic Fields around the various magnets and coils. Document and study all the various values of the components. Add extra Energy producing equipment to demonstrate various concepts that John Bedini has shown us.. And to show case experiments beyond what JB was allowed to show us. Then Bring the Ferris Wheel to the 2020 Energy Science & Technology Conference for a full Presentation.
The below is an excerpt from the full length vendors & announcement videos from the 2019 ESTC.
Jack Hanlon, Ph.D. believes over unity electrical machines have been built and even demonstrated many times at the ETSC and other places; however, he has never heard a complete explanation of “how they work” that will stand up to the skepticism of a conventionally trained mathematician, physicist or engineer.
The explanations always seem to involve some “mysterious” source of power or slightly nebulous use of magnetism.
The missing piece is always: what is the source of the extra power?
Since we have been unable to answer this question in a satisfactory way, the technology is put in the realm of “voodoo” science, and it is not seriously considered by the larger traditional scientific community.
He believes this holds back the wide spread and rapid development of this important technology and limits the developers to a small community of experimenters.
Switched reluctance generators have always been a prime candidate for overunity results. Eric Dollard who is very skeptical about any “free energy” claims was originally brought into Borderlands years ago to verify a switched reluctance generator built by Peter Lindemann and Michael Knox. Accounting for a sufficient margin of error, Eric Dollard found that it did indeed produce more work than it took to run the machine!
This is probably the most comprehensive analysis on where the free energy is in such machines and it is done in a relatively simple and eloquent manner with simple algebra and geometry.
In Dr. Hanlon’s last two brief videos, he introduced you to the concept of Geometric Algebra and then gave an introduction to Complex Numbers. In this video, he will give a more comprehensive, but still brief overview of Geometric Algebra.
It is highly recommended to study this video and his other two (all in order) in order to get the most out of his presentation THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS at the 2019 Energy Science & Technology Conference.
This is a quick 3 minute heads up on what Dr. Jack Hanlon’s presentation at the 2019 Energy Science & Technology Conference will be about. His presentation is called: THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS
Keep in mind that Dr. Hanlon is working on a new video that I’ll post on YouTube that will be narrated with a walk through on some of the basics to orient you his upcoming presentation, which is game-changing and revolutionary!
Recently, I had the privilege of talking to Dr. Jack Hanlon more in depth about his presentation on Geometric Algebra and it is much more powerful than I had initially thought. He gave me some very specific examples where mainstream science says no energy is happening, but it clearly is. He presented a type of “source-code” to being able to reveal this hidden energy using Geometric Algebra. Once it is understood where the energy is happening in reactive power situations, then the first step has been taken in being able to move towards understanding how we might be able to use it to create real measurable work, which is one of the “Holy Grails” of Free Energy.
Eric Dollard’s Versor Algebra is based on the work of Steinmetz who developed it in order to mathematically model and crack Tesla’s polyphase patents on behalf of General Electric who hired him. The application of Versor Algebra for studying polyphase power systems of any number of phases including the self-referencing single phase Tesla mode is possible. It can also be used to analyze planetary phases, the ebbs and flows of the ocean, time and countless other things that have rhythms and motions.
Having worked with Eric for a number of years now regarding this kind of math, which I do not claim to be at any level of proficiency, I can say that Dr. Hanlon’s Geometric Algebra developments will be an excellent foundation for anyone interested in learning what kind of math they should learn in order to mathematically show the basic operating principles of natural energy systems. I can say this because I fully comprehended what Dr. Hanlon shared with me and I have not studied mathematics for nearly 30 years.
After presenting my Hacking the Aether model, which is a “unified field” model for the layman showing possibly what gravity, inertia, time and other natural phenomena are in a simple but seamless method, Professor Haralick suggested that I put some math to it beyond the basic Newtonian Equations to tie it all together. I haven’t seen anything that seems to be a good fit but after talking to Dr. Hanlon, it’s the first time I have had an interest in learning a specific, simple and elegant mathematical method to accomplish my goals. I can only image what it could do for you in your pursuit of advanced energy technologies.
There will be a specific focus on switched reluctance motors/generators but this is far from being the only thing his developments in Geometric Algebra can be used for. Join us at the 2019 Energy Science & Technology Conference to see this landmark presentation in person. 2019 Energy Conference
The Homopolar Generator has always been known to be able to deliver electricity without bogging down the prime mover and Faraday knew this 150 years ago!
Normal generators create a back-torque against the prime mover because of Lenz’s Law, which can be explained as an electromagnetic equal and opposite reaction, but this is completely circumvented in the Homopolar Generators.
Get 25% off for a limited time with this coupon code: RLG25
Bruce DePalma simplified and advanced this concept with his invention known as the N-Machine, which is a simple spinning permanent magnet or electromagnetic by tapping the shaft and the outer perimeter of the rotating magnet. Keep in mind this all works without any coils whatsoever! This is completely different from normal electromagnetic generators.
Later on Adam Trombly made improvements to Bruce DePalma’s methods and when he filed for a patent, the Pentagon served him with a gag order because they themselves apparently had been working on similar technology and many of you know the rest of the story. What they didn’t know was that the patent was also filed in Europe and somehow Paramahamsa Tewari who headed up India’s Nuclear Power Corporation (a really big deal in India) got his hands on the info.
Mr. Tewari worked on replicating Mr. Trombly’s work. So the story goes – Mr. Tewari measured how much water could be electrolyzed with a certain amount of electricity. However, when that same electricity powered the Tewari Reactionless Generator (RLG), the output electrolyzed water and he wound up with several times more freed up hydrogen. This defeated Faraday’s Law of Electrolysis by a few hundred percent and this led to more advancements and innovations on the RLG technology.
Over the years, Mr. Paramahamsa Tewari had continued working on his RLG machine and it has become one of the most tested free energy devices in the world showing at least 238% more electricity coming out of it than going in. This has been tested by very qualified individuals and organizations connected to various companies and universities and the goal is to get this out to the world to help solve the energy problem.
Unfortunately, Mr. Tewari passed away toward the end of 2017 but thankfully, his son Anupam Tewari is committed to keeping his father’s legacy alive and he was gracious enough to come to the 2018 Energy Science & Technology Conference to present on his father’s work.
This presentation serves as a perfect starting point for anyone who is not familiar with the Tewari RLG, where it comes from and the how Mr. Tewari’s Space Vortex Theory led him to the RLG. Even if you are familiar with the Tewari RLG, there is some history here that many are not aware of and this is coming straight from his son, Anupam, so is authoritative and historically correct.
Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea, was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.”
However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft. Therefore, it quickly became evident that not all of the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized.
What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts. Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.”
The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses.
During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.
Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well established science of corporate book-keeping.
Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact. Both efficiency concepts shall be fully explained in this presentation.
Paramagnetic & Diamagnetic Field Experiments by Professor Robert Haralick, Guy Obolensky & Loren Zanier – In this talk, we describe experiments by which the diamagnetic field by the bloch region and by the poles of a magnet may be measured using 3-axis Hall effect milligaussmeters, magnetoresistive milligaussmeters and sensitive differential electrometers. Our experiments provide evidence for the existence of a diamagnetic field and the vortex of the paramagnetic field. Experiments also reveal longer spinning times with a load than without and a loss of weight. Release date – August 23, 2016. Learn more: Paramagnetic & Diamagnetic Field Experiments