Posted on Leave a comment

Adam’s Motor Demonstration at 2021 ESTC

Dr. Robert Adams Machine

Nick Kraakman who has been collaborating with Peter Lindemann behind the scenes is bringing an Adam’s Motor to the 2021 ESTC. Nick will be showing some never before seen pictures of some of Dr. Robert Adams machines that were sent to Peter Lindemann years ago. Peter corresponded with Dr. Adams for years and has compiled more booklets, pictures and letters from Dr. Adams regarding the Adams Motor than anyone that we know of. This information and pictures will all be available in digital downloadable format after the conference.

There are very specific features about the circuit and coils that are no immediately apparent, which give advantages to it’s efficiency and coefficient of performance (COP). This will all be explained at the conference.

Also, get your tickets to the 10th Annual Energy Science & Technology Conference where we will be demonstrating this and more 🙂 – Learn more about the Energy Conference here: https://energyscienceconference.com

The direct link to get your ticket(s) is here: https://emediapress.com/shop/energy-science-technology-conference-2021/

Here are a couple pictures of the latest build by Nick:

Posted on 1 Comment

Electrostatic Potential Drags Prime Mover

Electrostatic Rotary Converter

Recently, I did a simple test recommended by Eric Dollard on the Rotary Electrostatic Converter built by Chris Carson. It is recommended to look at the below post first before watching the video on the recent test.

Chris carson’s rotary electrotatic converter

The capacitor was sped up with a DC motor and then a potential transformer was turned up to about 4500 volts DC and this potential was applied to 1/2 of the capacitor to see if the electrostatic lines would try keep the rotating capacitor plates in phase with the stationary plates. If so, then it should increase the load on the DC motor and reducing it’s speed.

The video is here and there are some more tests to come relating to this:

Posted on Leave a comment

Bedini’s Glass Case Motor – Full Disclosure coming to 2020 ESTC

John Bedini's Glass Case Motor - Gravity Wave Space Flux Motor

In 1999, when John Bedini was first introduced to me, this “Glass Case Motor” was the first thing he wanted to show me so it had always been very special to me but it was even more special to John. It is a beautiful work of art that John built because it embodied the many principles that were worked out over the years with his partner from the past, Ron Cole.

The first time he ever presented it publicly was at the 2015 Energy Science & Technology Conference but it was mostly a demonstration along with the history and some of the thinking behind it but he never disclosed the circuit specs, coil details, etc.

The interesting or even profound thing about this “glass case motor”, which John actually called the Gravity Wave Space Flux Motor, is that it had run countless hours over the years on 30 year old either alkaline or zinc carbon batteries. The batteries had been seen to be in such poor shape that they were practically falling apart but nevertheless, once the rotor is spun, it picks up speed, turns a propeller shaft with eddy currents, blinks LEDs but the batteries never seem to die.

The long-awaited, full-disclosure that everyone has wanted but never thought would happen is coming to the 2020 Energy Science & Technology Conference.

While we may not be able to claim we know all the answer as to why this particular arrangement of coils, magnets, etc. can demonstrate these amazing feats and we may not be able to claim that we see this motor the same way John did as he had his own unique way of looking at things, you will will walk away with all the information necessary to replicate this historical and amazing machine!

Get your ticket now while you can for our 9th annual event – 2020 Energy Science & Technology Conference – register now: 2020 Energy Conference

Posted on Leave a comment

The Meaning of Unity in Energy Conversion Systems by Jim Murray – Paperback Available on Amazon Now!

The Meaning of Unity in Energy Conversion Systems by Jim Murray
The Meaning of Unity in Energy Conversion Systems by Jim Murray

 

At the 2018 Energy Science & Technology, Jim Murray, a legend in the Tesla Sciences & Free Energy field presented on The Meaning of Unity in Energy Conversion Systems. This is one of the most important presentations given in this field simply for the fact that is explains an accurate accounting method so that the distinctions are made between system efficiency and conversion efficiency. The bottom line is that this shows how to properly compare the input to the output of a system, which is more complex than it initially appears.

Get the paperback here: The Meaning of Unity in Energy Conversion Systems

Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.” However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft.

Jim Murray - 2018 ESTC
Jim Murray – 2018 ESTC

Therefore, it quickly became evident that not all the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized. What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts.

Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.

Get the paperback here: The Meaning of Unity in Energy Conversion Systems

The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses. During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.

Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well-established science of corporate book-keeping.

Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact.

Both efficiency concepts shall be fully explained in this book. Simply, this book serves as a definitive guide for those who wish to properly validate their input vs output claims. It also includes copies of one of the most significant and important patents in history in this field, The Dynaflux Alternator, which is Jim’s generator that has a reduced Lenz Law Effect meaning it has less drag than conventional science will admit is possible. There is also another related patent on Jim Murray’s Dynaflux Alternator, which gives a much wider picture. The Dyanflux was used as an example in the book so is not required to understand what it is about, but is valuable to know about.

Get the paperback here: The Meaning of Unity in Energy Conversion Systems

To get a copy of the video presentation from the 2018 ESTC, go here: The Meaning of Unity in Energy Conversion Systems Video Presentation

Posted on Leave a comment

transkinect, energy in movement – overunity mechanical converter?

For the last couple years, I’ve been in contact with Mr. Ihab Seidy from Singapore. His company Transkinect has been involved in various technologies that take advantage of the kinetic movement of mass in novel ways to produce more mechanical work on the output than what is thought to be required on the input.

This rotary converter’s associated claim and intention is to place it between a prime mover and a generator for the purposes of increasing the mechanical output with claims up to 500% more mechanical output than electrical input.

Here are a few bulletpoints from their website:

This Space energy technology is opening new horizons for abundant source of clean energy can be tapped from the space .

“ PowerMaximizer “ a Smart Mechanical device the first kind works as mechanical Load absorber , should be installed in-between any mechanical power source and load  for example ( in between electrical motor and water pump , in between combustion engine and drivetrain , in between wind turbine torque and Alternator )

The main technical advantages of the power Maximizer as follows  :

  • Absorb 70-80% from the mechanical load continuously , therefor only 20-30% from the load can be reflected or transferred to input power source .
  • Increase output speed 50-60% ( withoutimpact on input torque source )
  • Increase mechanical output torque 2-10 times ( without any impact on input speed source )
  • Increase overall power output 100-500%

Mr. Seidy has expressed interest in bringing a demonstration unit to the 2020 Energy Science & Technology for everyone to examine and measure to their satisfaction.

You can visit their website: https://spacenergy.co/

Mr. Seidy can be contacted directly through his LinkedIn page here: https://www.linkedin.com/in/ihab-seidy-73b72382/



Posted on Leave a comment

Full Disclosure Coming – John Bedini’s Ferris Wheel Motor

RS Stafford is a long time researcher in the energy sciences and knows more about John Bedini’s work than most. He is blessed to have been able to acquire John Bedini’s 6 coiler SG and the large Ferris Wheel Motor.

Here is the goal and why we need your help to raise some donations:

This link directs you to RS Stafford’s fundraiser – please help make this a reality: http://emediapress.com/ferriswheel

Investigate John Bedini’s Ferris Wheel Hub Motor and Mag amp Motor to get a better handle on how this Tech works.  Map out the Magnetic Fields around the various magnets and coils.   Document and study all the various values of the components.   Add extra Energy producing equipment to demonstrate various concepts that John Bedini  has shown us..  And to show case experiments  beyond what JB was allowed to show us.  Then Bring the Ferris Wheel to the 2020 Energy Science & Technology Conference for a full Presentation.

The below is an excerpt from the full length vendors & announcement videos from the 2019 ESTC.

This link directs you to RS Stafford’s fundraiser – please help make this a reality: http://emediapress.com/ferriswheel

Please share this with your friends!

Posted on Leave a comment

* NEW RELEASE * The Secret Power Source For Over Unity Switched Reluctance Generators by Jack Hanlon, Ph.D.

The Secret Power Source for Overunity Switched Reluctance Generators by Jack Hanlon, PhD
The Secret Power Source for Overunity Switched Reluctance Generators by Jack Hanlon, PhD

Jack Hanlon, Ph.D. believes over unity electrical machines have been built and even demonstrated many times at the ETSC and other places; however, he has never heard a complete explanation of “how they work” that will stand up to the skepticism of a conventionally trained mathematician, physicist or engineer.

The explanations always seem to involve some “mysterious” source of power or slightly nebulous use of magnetism.

The missing piece is always: what is the source of the extra power?

Learn more: https://emediapress.com/shop/secret-power-source-unity-switched-reluctance-generators/

Since we have been unable to answer this question in a satisfactory way, the technology is put in the realm of “voodoo” science, and it is not seriously considered by the larger traditional scientific community.

He believes this holds back the wide spread and rapid development of this important technology and limits the developers to a small community of experimenters.

Switched reluctance generators have always been a prime candidate for overunity results. Eric Dollard who is very skeptical about any “free energy” claims was originally brought into Borderlands years ago to verify a switched reluctance generator built by Peter Lindemann and Michael Knox. Accounting for a sufficient margin of error, Eric Dollard found that it did indeed produce more work than it took to run the machine!

This is probably the most comprehensive analysis on where the free energy is in such machines and it is done in a relatively simple and eloquent manner with simple algebra and geometry.

Learn more: https://emediapress.com/shop/secret-power-source-unity-switched-reluctance-generators/

If this technology is “real”, and he believes it is, then we should be able to give a solid and complete explanation for it based on traditional physics, mathematics and engineering principles.

You will get more than theory; you will get very specific examples of converting reactive power to real power by a former Los Alamos National Labs scientist and former university math teacher!

That is the goal of this presentation. Jack Hanlon thinks David Squires put it well in his 2012 ETSC conference presentation. He said: “You can’t engineer what you don’t fully understand”.

Learn more: https://emediapress.com/shop/secret-power-source-unity-switched-reluctance-generators/

Posted on Leave a comment

Overview of Geometric Algebra by Dr. Jack Hanlon

Jack Hanlon, Ph.D.In Dr. Hanlon’s last two brief videos, he introduced you to the concept of Geometric Algebra and then gave an introduction to Complex Numbers. In this video, he will give a more comprehensive, but still brief overview of Geometric Algebra.

It is highly recommended to study this video and his other two (all in order) in order to get the most out of his presentation THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS at the 2019 Energy Science & Technology Conference.

The first video is here: http://emediapress.com/2019/05/03/announcement-dr-jack-hanlons-upcoming-presentation/

The second video is here: http://emediapress.com/2019/05/03/announcement-dr-jack-hanlons-upcoming-presentation/

Here is the new video:

Share this with your friends with the share buttons below! Subscribe to my YouTube channel to get more videos like this. https://www.youtube.com/user/aaronmurakami

 

Posted on Leave a comment

Complex Number Primer by Dr. Jack Hanlon

Jack Hanlon, PhD

Dr. Jack Hanlon will present: The Secret Power Source for Overunity Switched Reluctance Generators at the 2019 Energy Science & Technology Conference.

This video is a primer on Complex Numbers that will give you an idea of what this presentation is about.

There are only 12 seats remaining so if you want to come to the conference, don’t delay: http://energyscienceconference.com

Posted on Leave a comment

Announcement – Dr. Jack Hanlon’s Upcoming Presentation

Jack Hanlon, Ph.D.
Jack Hanlon, Ph.D.

This is a quick 3 minute heads up on what Dr. Jack Hanlon’s presentation at the 2019 Energy Science & Technology Conference will be about. His presentation is called: THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS

To see Dr. Hanlon’s bio, go here: http://energyscienceconference.com/2019-speakers/

Keep in mind that Dr. Hanlon is working on a new video that I’ll post on YouTube that will be narrated with a walk through on some of the basics to orient you his upcoming presentation, which is game-changing and revolutionary!

Subscribe to my YouTube channel so you can make sure to get updates when new videos are posted: https://www.youtube.com/user/aaronmurakami

Share this with you friends using the share buttons below. Also, join Energy Times at the top right of this page for a lot of freebies and other exclusive information.