Category Archives: Faraday

2018-08-13 Eric Dollard Live Call Q & A on History Theory & Practice of the Electrical Utility System

This is a recording of a live Q & A call with Eric Dollard a few weeks after his 5 hours landmark presentation was given at the 2018 ESTC (Energy Science & Technology Conference).

Some of the topics that you will learn about on this call include:

  • Faraday’s Tubes
  • How the Faraday Tubes creates magnetism in a permanent magnet
  • Faraday Tubes in relation to the Lakhovsky MWO
  • What Zero Sequence Currents Are
  • The massive amount of ground currents caused by the degenerated grid
  • How and why you could be shocked from the neutral in electrical systems in homes or businesses
  • How AC is not sine waves anymore but are very dirty and distorted all across the country
  • EMP vulnerabilities of the grid
  • How to protect your electrical system with isolation transformers
  • Frequency ranges for receiving telluric signals and how to build your own simple receiver
  • How magnetic flux in a transformer is longitudinal

For a copy of the actual presentation, visit: http://emediapress.com/ericdollard/utility/

EPD Laboratories, Inc. is a 501(c)3 non-profit charitable corporation so all donations are tax deductible. Please visit http://ericpdollard.com and in the right column, you can donate by PayPal or you through the mail. Anything you can donate would be greatly appreciated and is very much needed at this time.

High Voltage N-Machine

Faraday's Disc Dynamo
Faraday’s Disc Dynamo.

In 1831, Michael Faraday invented the Faraday Disc Generator. It was a simple copper disc rotating between 2 magnetic fields that were perpendicular to the conductor. It worked, but had efficiency problems with current moving in opposite direction away from the magnetic field as well as other issues.

Around 1977, Bruce DePalma invented the “N-Machine”, which was not predicted by Faraday or Maxwell as it had the magnets FIXED to the conductor and they rotated together – something that is not supposed to work but it does.

N-Machine
N-Machine

Today, there is still no satisfactory answer as to why it works and the conventional explanations fall flat.

DePalma’s presentation is available here as part of a large collection of videos called Classic Energy Videos

Later on Adam Trombly enhanced DePalma’s N-Machine and was given two gag orders by the Pentagon. Fortunately, the patent applications had already circulated world wide and Paramahamsa Tewari had replicated Trombly’s machine and to this day, they are still moving this technology forward.

The above mentioned machines of DePalma, Trombly and Tewari are legitimate “overunity” machines where more electricity can be taken from it than is required to run the prime mover.

The problem with many of these related machines is that they output a lot of current, but there is hardly any voltage. The voltage is so low it will be in the millivolts and to get anything in the couple volt range requires very large setups with very high RPM’s.

At the 2017 Energy Science & Technology Conference, I’ll show the simplest and most elegant innovation to the N-Machine concept that has allowed me to charge a capacitor to 18 volts DC and the magnets are only 2 inches in diameter and they were spinning at only 2000 RPM at the most. This is a world’s record and is something that I came up with many years ago.

I’ve experimented with it off and on over the last few years and proven it to work indisputably and it is so simple that everyone will be wondering why nobody else has every figured this out until now.

This presentation will be the first presentation Saturday morning at the energy conference. All the seats are sold out, but the presentation will be released in the A & P Electronic Media catalog not too long after the conference.

The whole catalog is available at http://emediapress.com

Share this with everyone with the share buttons below. Once this method is out there, it can never be put back in the bottle!