Here is Shorted Coils Part 2, which shows a couple benefits of why you would even want to do it, possibly, in some of your own builds. You wind up with more output from your coils while simultaneously unloading the prime mover. We’ll show a bit more on the Kromrey with a few more experiments in another video soon:
Share this with the buttons below and register at the 2018 Energy Science & Technology conference here: Energy Conference
The Kromrey Generator is one of the most interesting generators that has made it to the public. Although it has never been mass produced, enough researchers and developers have built them to demonstrate that it definitely has some anomalous properties. John Bedini is one of those geniuses that has been involved with the Kromrey Generator before most have ever heard of it as well as having built many variations that hold up to the claims of the inventor.
At the 2016 Energy Science & Technology Conference, Peter Lindemann presented a large-scale Bedini SG that ran itself and kept its batteries charged up as well as demonstrating John’s 2 Pole larger Kromrey Generator. In the demonstration, it showed that the input motor drew about 32 watts while charging a battery with 72 watts. That is about twice as much output as what was being supplied to the input. Peter’s presentation that goes into the operation of this machine is available here titled Bedini SG – Beyond the Advanced Handbook – http://bedinisg.com
On that same website is the third SG book called Bedini SG – The Complete Advanced Handbook and that goes into a lot of the details on the Kromrey Generator as well.
Below is a video where I show a simple video of the machine actually speeding up as the output is shorted – normally, this would create so much counter-torque that it will make it very difficult for the input motor to turn. Instead, it actually climbs 50-60 rpm while the input power actually drops! There is a simple reason for this but there are other anomalous aspects that conventional science cannot explain such as the demonstration results that Peter showed at the conference. The below video also gives a few closeups of the Kromrey Generator that John Bedini built (one of them) as well as an error that I discovered in the Kromrey Generator patent that nobody has ever pointed out until now.
Make sure to register for the 2018 Energy Science & Technology Conference – you never know what we might show next! Energy Conference
Share this video with your friends with the share buttons below – not everyone has seen a generator that actually unloads the prime mover when it is shorted out! Please understand the significance of this machine is profound. Imagine a gas generator set running and you turn on some lights powered by the generator but the gas engine stays the same RPM. That means that it doesn’t take more electricity to power a load. I still consider this technology in its infancy and there is a lot of room for improvements, which may be coming out in the near future.
Paramahamsa Tewari, author, inventor, and retired Executive Director (Nuclear Projects) of the Nuclear Power Corporation of India (NPCIL), passed away on November 27, 2017, in his hometown region close to Varanasi, Uttar Pradesh. Mr. Tewari, who was 80, is survived by his wife, Venodini Tewari, and three children, Arvind Tewari, Sarala Paliwal, and Anupam Tewari. A B.Sc. Engineering graduate from Benares Hindu University, he had a career over four decades with NPCIL. His pioneering contributions, however, extend beyond his professional career. He is the author of a revolutionary theory in physics, the Space Vortex Theory (SVT), and a number of books on the same, that won early commendation by Nobel Laureates in physics. His theory led him to invent the Tewari Reactionless Generator (T-RLG), a high-efficiency electrical generator.
Paramahamsa Tewari was a life-force that burned bright with innate curiosity about the physical and spiritual worlds, deep conviction in the power of creativity, and an entrepreneurial spirit and approach to problem-solving. He was committed to the broad uplhiftment of society, particularly the underprivileged, and meaningful employment for talent. Animal cruelty prevention was a cause dear to his beliefs. With people, he was personable and interested in their individuality. Somewhat of a raconteur, he enjoyed recounting anecdotal stories from everyday life. Nature was a source of inspiration for him. Building a boat by hand with a friend, a love of sports, driving through the Himalayas multiple times in his less-than-powerful Standard Herald sedan, were each fueled by his adventuresome spirit.
Please join his family for a memorial, open to the public, to honour his memory, on December 9, 2017 at Venodini Nivas, P.O. Gotegali – 581317, Karwar, Karnataka, India.
The generator technology the Tewari was involved with is a “reactionless” or drag free generator, which means it does not produce a counter torque against the prime mover turning it when electricity is drawn from it and his machines have been measured to produce around 250% more electricity than is supplied to the prime mover.
Here is a video where I walk you through the way to measure the sideband frequencies that are created when using the Bedini RPX. A machine must produce these frequencies in order to hit all the real Rife frequencies or it is not a real Rife machine.
It is possible to input a single frequency that will alter the fundamental frequency in order to hit a specific Rife frequency, but by having a function generator sweep through a broad range, you hit them all automatically without knowing what the exact frequencies are. That means it also will hit frequencies that Rife did not yet know the function of.
This is an experimental test device with no claims given.
Paramagnetic & Diamagnetic Field Experiments by Professor Robert Haralick, Guy Obolensky & Loren Zanier – In this talk, we describe experiments by which the diamagnetic field by the bloch region and by the poles of a magnet may be measured using 3-axis Hall effect milligaussmeters, magnetoresistive milligaussmeters and sensitive differential electrometers. Our experiments provide evidence for the existence of a diamagnetic field and the vortex of the paramagnetic field. Experiments also reveal longer spinning times with a load than without and a loss of weight. Release date – August 23, 2016. Learn more: Paramagnetic & Diamagnetic Field Experiments
There are many kinds of water generators and most slow down the flow of the water. One company, Lucid Energy has inline generators that can be used to create electricity from water leaving water towers and other similar situations without any significant reduction in the water pressure!
A classic three-phase 7 horsepower motor can easily be over 100 pounds and is designed to run around 1800 rpm. This higher power density motor delivers this kind of horsepower at almost 5 times the speed. It has different applications and windows of operation so it isn’t an apples to apples comparison. However, the developers do appear to win the bragging rights for the most energy dense motor commercially available.
Launchpoint Technologies website says, “With a total weight of only 1.4 pounds, this motor produces 7 horsepower at 8400 rpm with 95 percent efficiency. At 5 horsepower per pound, this motor has a higher power density than any other motor on the market.”
There are countless applications for this kind of motor such as improvements in battery life in electric cars, electric bikes, electric-powered aircraft and the list goes on.
What makes this advancement possible is the use of the Halbach Array, which is a clever organization of the polarity of multiple magnets to create a very strong field on one side while almost totally negating the field on the other. Here is an old discussion on the Halback Array on Energetic Forum with some references: Halbach Array
Here is an early demo of the Launchpoint Technologies Halbach Array motor:
A very interesting benefit of the Halbach Array is that it defeats Earnshaw’s Theorem which says, “states that a collection of point charges cannot be maintained in a stable stationary equilibrium configuration solely by the electrostatic interaction of the charges.”
For example, if you took a ring magnet and had another magnet on a shaft in side of that ring magnet, you wouldn’t be able to get it to stay right in the middle even if you spin it – if you were trying to create a magnetic bearing for example.
However, with the Halbach Array, you can. With the clever arrangement of the polarities of various permanent magnets, you can indeed get a magnet to spin inside of this field and maintain stability in the middle without it sticking to any particular spot.