Tag Archives: heat

Silent Refrigeration

A refrigerator uses a traditional heat pump. A compressor is powered usually by electricity and that circulates a “refrigerant” like freon or some synthetic version through some tubes that go through heat exchangers – the bottom line is that is pulls the heat out of the fridge to make it cold.

An AC is just another variation of this as is all other heat pump technologies such as heat pump hot water heaters. Some give you cold while expelling the heat and some give you heat while expelling the cold.

Heat pumps are a really great technology and are very reliable and have made our lives much easier. There are a few drawbacks such as the noise and occasional maintenance due to moving parts.

Phononic is a company, which has eliminated these problems by building a completely silent and solid state refrigerator using hundred year old Peltier junctions…they’re semiconductors basically that get hot on one side and cold on the other.

Peltier’s definitely work but their drawback is that they are very inefficient…it takes a lot of watt hours to produce any substantial heating or cooling, but Phononic has scaled them up and have made them more efficient than ever. Normally, they’re under 10% efficient, but now they’re over 30%!

Phononic heat pump

Even at 30%, they can’t compete with heat pumps in terms of Coefficient of Performance (COP), but being that they are much smaller than normal compressor heat pumps and they’re silent, they do have their place.

While this advancement in Peltier technology isn’t going to get anyone off the grid, it is a very welcome improvement as a three times increase in efficiency in anything doesn’t happen every day.

To put that into perspective – the automobile engine was commonly under 20% efficient and the newest cars on the road today are lucky to achieve 30% efficiency – and that is over many, many decades of automotive advancements.

Go here for more of the story on Phononic: http://www.treehugger.com/clean-technology/your-refrigerator-running-soon-it-will-be-doing-doing-it-solid-state.html

New Release Update and Specials Expire Tomorrow!

TOPICS
  • DYNAFLUX ALTERNATOR FULL PACKAGE * NEW RELEASE *
  • ERIC DOLLARD POST CONFERENCE INTERVIEW ON YOUTUBE
  • JIM MURRAY & PAUL BABCOCK’S INTERVIEW PUBLIC ON YOUTUBE
  • * NEW * IGNITION SECRETS & WATER FUEL SECRETS PRESENTATION FROM THE 2014 ENERGY CONFERENCE COMING SOON!
 
Hi Friend,
 
Thank you for your continued to support in the 2014 Energy Science & Technology Conference Series of Presentations! We’ll have another new release out next week, but in the meantime here are some of the latest updates! 
 
 
DYNAFLUX ALTERNATOR FULL PACKAGE * NEW RELEASE * 
 
We have already released Jim Murray’s demonstration video of his Dynaflux Alternator and other devices that were shown to some Japanese businessmen. We have also already released his Patent Collection. 
 
For the first time, we are no releasing a BRAND NEW video, which is a private tour of Jim Murray’s lab where he shows some more demos including some machines that he has never shown before! This video shows you what normally only investors would see under a heavy non-disclosure agreement – so get your hands on a copy of this while you can! 
 
In 22 HOURS, we’re releasing the FULL PACKAGE, which includes the above mentioned video and patent collection, but also the * NEW * video of the private tour of Jim’s Lab. This will be available at a lower introductory special, which will expire next week so when we send out a link tomorrow, make sure to get your copy early! Stay tuned…

 
ERIC DOLLARD POST CONFERENCE INTERVIEW ON YOUTUBE
 
Here is an interview with Eric that has been unlisted for a while, but is now public on Youtube. Eric covers a wide range of topics and he discusses a bit about his most recent groundbreaking presentation The Extraluminal Transmission Systems of Tesla and Alexanderson – watch it now:

http://www.youtube.com/watch?v=G5HX9wHU4QE

 
Eric’s presentation is currently discounted but this discount expires tomorrow night at midnight so make sure you take advantage of this introductory special right now: http://extraluminaltransmission.com
 
 
JIM MURRAY & PAUL BABCOCK’S INTERVIEW PUBLIC ON YOUTUBE
 
At the 2014 Energy Science & Technology Conference, Paul Babcock and Jim Murray talk about the SERPS technology invented by Jim and replicated by Paul. The  SERPS machine in this interview has a COP of 47.9, which is 4790% of the input net energy! This video has been unlisted on Youtube but is now public so check it out now:
http://www.youtube.com/watch?v=rP6fpN6avIc
 
Their presentation from the conference, The Secret to Tesla’s Power Magnification discusses the science behind this mind-blowing machine and it reveals the origins are actually in Tesla’s work, which almost nobody has ever quite comprehended or even recognized. This presentation is also current discounted but this special expires tomorrow night at midnight so get your copy now: http://teslaspowermagnification.com
 
 
* NEW * IGNITION SECRETS & WATER FUEL SECRETS PRESENTATION FROM THE 2014 ENERGY CONFERENCE COMING SOON!
 
Ignition Secrets and Water Fuel Secrets has been available only as books with some supporting videos, but for the first time ever, you will be able to have a full video presentation that was filmed at the 2014 Energy Science & Technology Conference. 
 
The Ignition Secrets presentation goes into more details about the science of the plasma ignition quite a bit deeper than what is in the book and the Water Fuel Secrets presentation also goes into more details on the production of an on-demand fuel with nothing more than water, air and electricity.
 
BOTH presentations contain powerful references directly from NASA, JPL and other high level scientific organization validating all the claims for not only the plasma ignition but also for on-demand hydrogen gas production. You will also learn of a new theory about how and why “HHO Boosters” actually work as a fuel supplement and it dispels the myths about magically rearranged water molecules or other claims about how they’re supposed to work. It will be a breath of fresh air because it makes sense and is backed by quite a bit of research.
 
You will also see for the first time ever Aaron’s jet engine project – you will see how the exhaust is recycled and other modification that allowed him to run the jet on virtually 0 PSI propane! 
 
Keep an eye out for this new release next week and look for our email tomorrow with a link to the Dynaflux Alternator Full Package by Jim Murray! 

Sincerely,
Aaron & Peter
A & P Electronic Media

NEW RELEASE – The Secret of Tesla’s Power Magnification

THE SECRET OF TESLA’S POWER MAGNIFICATION

The Secret of Tesla's Power Magnification by Jim Murray & Paul BabcockWe’re honored to be able to release Jim Murray and Paul Babcock’s presentation from the 2014 Energy Science & Technology Conference! This is one of the most, if not THE MOST, anticipated video presentation we have ever made available. Jim & Paul teach the science behind the SERPS (Switched Energy Resonant Power Supply) device, which has the highest publicly demonstrated COP’s that we know of.

The title of the final presentation release is -The Secret of Tesla’s Power Magnification. It’s 2 Hours Long and we’re even including a PDF of the powerpoint for the presentation so you can see everything up close and clear.

Get your copy now: http://teslaspowermagnification.com

At the conference – Paul Babcock’s replication of Jim Murray’s SERPS device using his own patented high speed switching method was producing 52.7 Watts of dissipated energy in two light bulbs while the net draw from the power transformer was only 1.1 Watts! That is a COP of 47.9 or 4790% more energy dissipated in the light bulbs than the net draw from the power supply.

This information represents the first public display and explanation of this technology in all of history.  Even Tesla never showed this much about how to accomplish these effects.

Get your copy now: http://teslaspowermagnification.com

Sincerely,
Aaron & Peter
A & P Electronic Media

Free Video from the 2014 Energy Science & Technology Conference

TOPICS
  •  FREE Video from 2014 Energy Science & Technology Conference
  • 48 HOURS UNTIL THE RELEASE OF JIM MURRAY & PAUL BABCOCK’S PRESENTATION FROM THE ENERGY CONFERENCE – SERPS COP 47.9 (4790%)!!!!
 
Hi Friends,
 
The 2014 Energy Science & Technology Conference was an incredible success! Many are saying it is the most important conference they have been to in their lives from any category of conference. 
 
I’ve been to three conferences: 2010, 2013 and 201. This year’s conference was the best so far! There isn’t even a close second.” – Breck
 
I drove a total of 3478 miles round trip to attend the convention and was able to personally talk with, and ask questions of, all the presenters. I really appreciated the opportunity for the one on one contact and getting to see the equipment and demonstrations up close and personal! Thanks for holding the convention and thanks to all the presenters! It was time, energy and money well invested.” – Gary Hammond
 
Enjoyed the conference and was worth the 2700 kms I put on the wife’s van. As a fabricator and builder the conference was a bit overwhelming but the connections I made were well worth the trip. I would go again and look forward to your next one.” – Jerry Sand
 
FREE Video from 2014 Energy Science & Technology Conference
 
To view this free video from the conference, you must be a subscriber to the Energy Times newsletter. If you are already a subscriber, you will receive an email with the viewing instructions. If not, go here to watch the video: http://www.emediapress.com/energytimes.php
 
After you click the confirmation link in the email that comes, the first newsletter will have the video link and password. Make sure to give the video a thumbs up to show your support for all the speakers!
 
48 HOURS UNTIL THE RELEASE OF JIM MURRAY & PAUL BABCOCK’S PRESENTATION FROM THE ENERGY CONFERENCE!
 
Beginning in two days, the 2014 Conference Film Series will start being released. The first presentation will be the monumental presentation by Jim Murray and Paul Babcock about Jim’s amazing SERPS device. SERPS stands for Switch Energy Resonant Power Supply and is the ultimate in methods for using, storing, and returning electricity to its source!

In the first hour, Jim Murray shows the various machines he built and tested over the last 35 years that lead to the understanding of how to build the SERPS device.  In the second hour, Paul Babcock explains the theoretical operations of the SERPS system showing how it borrows, uses, and returns electrical power to the source.

 
The presentation then switches to a clip in the exhibit room where the working model was running and demonstrating 4790% MORE WORK THAN IS SUPPLIED IN NET ENERGY FROM THE POWER SUPPLY – THAT IS A COP OF 47.9!!! It ends with a Q&A by Paul back in the meeting room. A separate PDF file of all of the slides shown in the Power Point Presentation will be included.
 
 
Sincerely,
Aaron & Peter
A & P Electronic Media
 
 
 

June 17, 2014 – Energy Times

TOPICS
  • SOLAR STERLING 1.5KW
  • PETER LINDEMANN TO PRESENT AT THE CONFERENCE!
  • 1939 GRAVITY POWER UPDATE
  • MURAKAMI ELLIPTICAL DRIVE
 
Hi,
 
We’ve all been running in high gear preparing for the conference, which is only 10 days away! If you want to come see the historical presentations, register now as there are only 25 seats left and they’re going quick. http://energyscienceconference.com
 
 
SOLAR STERLING 1.5KW
 
Here is an awesome video of a giant Sterling engine that is producing 1.5kw to provide heat, mechanical energy, cooking heat, etc… http://emediapress.com/2014/06/17/solar-sterling-1-5kw/
 
 
PETER LINDEMANN TO PRESENT AT THE CONFERENCE!
 
Peter will be giving a sneak peak demonstration at the conference of the machine that will be the basis for the material in the 3rd Bedini book – Bedini SG –
The Complete Advanced Handbook
, which focuses on converting mechanical work to electrical energy. 
 
There will be more variations presented in the book and the video presentation will be part of the book package, which should be available no later than August. 
 
 
1939 GRAVITY POWER UPDATE
 
If you have seen William F. Skinner’s 1939 Gravity Power Machine, you might be as blow away by it as we have. If you haven’t seen it, watch this: http://emediapress.com/2014/05/30/1200-gravity-power/
 
There are already some replication attempts – here is a link to more details:  http://emediapress.com/2014/06/17/1939-gravity-power-replications-updates/ and a bunch of comments by Aaron Murakami. You’ll also get a link to a paper by Nikola Tesla on the Moon’s Rotation that is relevant to rotating mechanical systems.
 
 
MURAKAMI ELLIPTICAL DRIVE
 

There are various ways to rotate a lever in an elliptical orbit like the input lever of the Skinner Gravity Power Machine. Here is a method that is very simple and might just make it easier for people to replicate the machine – you can see the bicycle wheel demo towards the end that demonstrates the principle: http://emediapress.com/2014/06/17/murakami-elliptical-drive/

 
 
Enjoy!
Energy Times

 

Solar Stirling 1.5kw

Here is a great video showing a giant solar Stirling engine producing 1.5 kw of electricity from a 100C temperature differential between cold water and heat in a greenhouse. 1.5 kw is a lot of energy for a small village and the technology is fairly low-tech.

Peter Lindemann has been talking about the exact same setup for years that you see in the video – you can learn more at this discussion: http://www.energeticforum.com/renewable-energy/10145-scaled-up-solar-stirling.html