This is a quick 3 minute heads up on what Dr. Jack Hanlon’s presentation at the 2019 Energy Science & Technology Conference will be about. His presentation is called: THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS
Keep in mind that Dr. Hanlon is working on a new video that I’ll post on YouTube that will be narrated with a walk through on some of the basics to orient you his upcoming presentation, which is game-changing and revolutionary!
Share this with you friends using the share buttons below. Also, join Energy Times at the top right of this page for a lot of freebies and other exclusive information.
A university project created a cooling system that creates about 600% more work than it takes to run the system using memory metal.
In this brief article, you’ll learn how something can easily produce way more work than it takes to run it and there are no violations of physics.
Electric heating element heaters are energy hogs for the heat they produce but regardless, they are 100% efficient already. And there is nothing magical or special about a 100% efficient heating system.
Why? Because nichrome or other heating element wire is thought to dissipate or waste all the electrical current that runs through it. That is not even close to being the reality, but that is what conventional science believes so we’ll just entertain that for the purposes of this article and to keep it simple. Normally, heat is considered waste in non-heat systems but if you power a heating element and it “wastes” all the electricity, then it is 100% efficient since the desired work is the heat.
Efficiency is a funny subject because as absolute as it sounds, it is really an objective measurement because efficiency changes depending on your perspective of what kind of work you want.
An incandescent bulb is considered 10% efficient since the desired work is light while 90% of the energy is “wasted” in heat. However, if we want to use those bulbs as heaters, then magically, they would be considered 90% efficient, with 10% wasted as light. But if you want some heat AND light, then the bulb is also magically considered 100% efficient since 100% of what you are using to power the bulb is creating both power and light.
Heat pumps create hundreds of percent more heat/cooling than the electricity required to run them – geothermal, refrigerators, air conditioners, air source heat pump dryers and water heaters, etc. yet, they are less efficient than heating element heaters.
Efficiency is a ratio of TOTAL input to TOTAL output. The heating element produces as much heat as the wattage is provided. It is 100% efficient.
But there is another measurement, COP or Coefficient of Performance, which is the ratio of ONLY WHAT WE PROVIDE on the input compared to the TOTAL output. With a heating element, we provide all the input so total output divided by our input will equal 1.0 or COP of 1.0.
With heat pumps, the story is very different. If it takes 200 watts of electricity to run a compressor to circulate a refrigerant through compressions and expansions cycles (that creates high and low potentials in the system), heat moves for free towards a colder area so the total amount of heat moved in a heat pump can easily be 300, 400, 500, or 600 watts worth of work in an electrical equivalent – for only paying 200 at the wall.
If you put in 200 but you get 600 watts of heat movement, the total desired work is 600 watts worth divided by only your input (not counting free environmental contribution) of 200 watts = 3.0 or COP of 3.0. That is a 300% NET GAIN in total energy (work) produced compared to what you have to pay for. But if you look at all input including environmental input, it will be under 100% since there are losses. That is how you can have a system that produced hundreds of percent more work compared to what you pay for although it will still be 100% efficient of less.
The cooling system methodology created by a team led by Professors Stefan Seelecke and Andreas Schütze at Saarland University is technically not new in concept, but it is the best example of taking advantage of an interesting memory metal called Nitinol and it’s known effects of soaking up heat while it gets bent and releasing the heat when it straightens out.
The cooling system is made of a cylindrical chamber with a rotor that has nitinol metal strings running along the length. There is a cam system that flexes the wire as it rotates for 1/2 the revolution. During this 1/2, the wires soak up heat in that compartment, which cools the compartment down. When the wires goes into the other side of the chamber, they are allowed to straighten up and they release a lot of heat, which heats up that compartment.
There is air moving through the devices to move both the hot and cold air. The claims from the university is that it is about twice as efficient as a heat pump. As you know from the examples above that a heat pump could have a COP of 2.0 or 3.0 easily. That means that this new Nitinol cooling device would have a COP of 4.0-6.0 or 400-600% more work done than the motor takes to rotate the cylinder!
To learn how open systems are permissible by the laws of physics and that systems CAN and DO produce more work than it requires from the operator by getting these two presentations:
At the 2019 Energy Science & Technology Conference, Geoffrey Miller will be presenting on a massive Newman Motor that he recently built. He’ll also be disclosing a very * RARE * device invented by Joseph Newman that most Newman fans have never heard of. There will be a demo of this device and all details necessary to replicate it will given!
There are only 150 seats available for the 2019 Energy Science & Technology Conference and they’re going to be sold out months before the conference – register and get your tickets now: 2019 Energy Conference
LOOK AT THE SIZE OF THAT ROTOR!!
Here are the details: NEWMAN’S 10,000 LBS MOTOR IN 2019 & DEMONSTRATION AND EXCLUSIVE FULL DISCLOSURE OF RARE NEWMAN DEVICE – The 2019 talk will be on the NEW 10,000 lbs Joseph Newman Motor built by Geoffrey S. Miller at Energybat Labs. In 2017, he gave a talk about the Newman Motor and a small demo of the motor. This year, Geoffrey Miller will go into a whole new level with the new 10,000 lbs motor. The talk outline is below.
1. History of Newman’s big motors. 2. Who maid the new 10,000 lb. motor 3. Why make a 10,000 lb. motor? 4. What it takes to make a motor this size. 5. What the motor will do. 6. All parts of the motor. 7. All motor data. 8. Power in & Power out. 9. Motor running parts of the lab. 10. Videos of the motor running. 11. Hand out data. 12. Q & A session. 13. A live demo will follow the talk about a Newman device.
It is recommended that you get a copy of Geoffrey Miller’s presentation from the 2017 Energy Science & Technology Conference, which will lay the foundation for the upcoming talk: NEWMAN MOTOR DISCLOSURE
The Self-Recharging Battery Supply of Carlos F. Benitez by Peter Lindemann, D.Sc.
NOTE: This machine was demonstrated at the 2018 Energy Science & Technology Conference (ESTC) but there was no formal presentation. It was only explained to attendees who were interested enough to ask Peter Lindemann questions about it back in the vendor/demo room. This machine is a very small powered demonstration, but proves the point and kept itself charged up all weekend while running a motor/generator. This EXACT circuit from 100 years ago is the foundation for several well-known circuits that have been taught by John Bedini and others over the years – you are being handed the origin of where much of it came from.
Between 1915 and 1918, Carlos F. Benitez was issued 4 British Patents on a “System for the Generation of Electric Currents.” It was the early days of the “electrical era” and many experimenters were claiming new ways to produce useful electrical effects. But this was different. Benitez was claiming to be able to run light bulbs and motors from batteries that never needed to be re-charged from a conventional, external source.
By this time, the Laws of Thermodynamics had become widely taught, and so most electrical engineers did not take these claims seriously. Even today, 99% of scientists and engineers believe this is impossible, under any circumstances.
Here’s why: Classic electrical theory assumes that when a load is operated in the manner shown here, the load RL receives ½ of the power provided by the 12 volt supply, and the 6 volt battery wired in reverse receives the other half as a charging effect. Since the battery being charged only receives ½ of the energy supplied by the source, rotating the batteries back and forth runs them all down in a conventional manner.
So, it is curious to find this quote in one of Benitez’s Patents:
“Obviously the current furnished by the discharge of battery 1-2 alone, would produce a smaller charge in batteries 3-4, if some extra energy were not added to the normal output of said battery 1-2. With this object in view any of the known methods for the generation of high frequency currents, as well as those described in the aforementioned English Patents, can be employed in conjunction with said batteries, in order to provide that complementary energy, and in this manner it is always possible to charge and discharge alternately each battery from one to the other, maintaining constant a storage of electricity and producing furthermore an excess of electrical energy.”
On the Patents, Benitez is referred to as a civil engineer, living in Guadalajara, Mexico. So, while he may not have been earning his living in the electrical sciences, he certainly was familiar with both classic electrical theory and the benefits of his discoveries!
For any honest student, the questions become: Was Benitez mistaken, or did he discover something important? And if so, HOW is this possible??
Benitez was issued 4 Patents, and each one describes a different circuitry and method to accomplish the objects of the invention, which included running external loads AND returning the electrical source to its initial state of charge simultaneously. Since there was no dispute about how much energy was being dissipated by running the loads, the following conclusion may be drawn:
Benitez discovered that it was possible to return a battery to a higher energy state with fewer watt-hours delivered to it than classic electrical theory would predict, as long as that energy was applied to the battery under the correct conditions and in the proper manner.
Today, we would describe this as the ability to charge a battery at a COP > 1.
As John Bedini always said, the “gain” showed up in the battery. The circuits themselves always operated at an efficiency below 100%.
If we assume that in the circuits that had two banks of batteries in them, the charging batteries were receiving about ½ of the energy provided by the run batteries, then the circuitry had to overcome the loss of running the loads and the loss of running the circuitry itself. In this instance, the system would have to be able to produce a charging effect in the receiving batteries equal to 2.2 times the watt-hours provided, or a charging COP > 2.2 for the system to self-sustain indefinitely.
So, the GOAL for an operating system is to attain a battery charging efficiency with a COP > 2.2!
That said, there are other ways to accomplish the goals of the invention, but “super-efficient” battery charging is definitely one of the ways. For students familiar with the work of John Bedini, this method is the best documented and published on, as well.
NOTE: This presentation gives you the EXACT schematic to replicate Peter Lindemann’s circuit that he demonstrated at the 2018 ESTC, operating theory, supporting diagrams and complete explanations of how to operate it. Also, there are multiple URL shortcuts inside the zip file that are highly relevant to this technology. Some are to other presentations and some are to specific discussions at Energetic Forum.
The Homopolar Generator has always been known to be able to deliver electricity without bogging down the prime mover and Faraday knew this 150 years ago!
Normal generators create a back-torque against the prime mover because of Lenz’s Law, which can be explained as an electromagnetic equal and opposite reaction, but this is completely circumvented in the Homopolar Generators.
Get 25% off for a limited time with this coupon code: RLG25
Bruce DePalma simplified and advanced this concept with his invention known as the N-Machine, which is a simple spinning permanent magnet or electromagnetic by tapping the shaft and the outer perimeter of the rotating magnet. Keep in mind this all works without any coils whatsoever! This is completely different from normal electromagnetic generators.
Later on Adam Trombly made improvements to Bruce DePalma’s methods and when he filed for a patent, the Pentagon served him with a gag order because they themselves apparently had been working on similar technology and many of you know the rest of the story. What they didn’t know was that the patent was also filed in Europe and somehow Paramahamsa Tewari who headed up India’s Nuclear Power Corporation (a really big deal in India) got his hands on the info.
Mr. Tewari worked on replicating Mr. Trombly’s work. So the story goes – Mr. Tewari measured how much water could be electrolyzed with a certain amount of electricity. However, when that same electricity powered the Tewari Reactionless Generator (RLG), the output electrolyzed water and he wound up with several times more freed up hydrogen. This defeated Faraday’s Law of Electrolysis by a few hundred percent and this led to more advancements and innovations on the RLG technology.
Over the years, Mr. Paramahamsa Tewari had continued working on his RLG machine and it has become one of the most tested free energy devices in the world showing at least 238% more electricity coming out of it than going in. This has been tested by very qualified individuals and organizations connected to various companies and universities and the goal is to get this out to the world to help solve the energy problem.
Unfortunately, Mr. Tewari passed away toward the end of 2017 but thankfully, his son Anupam Tewari is committed to keeping his father’s legacy alive and he was gracious enough to come to the 2018 Energy Science & Technology Conference to present on his father’s work.
This presentation serves as a perfect starting point for anyone who is not familiar with the Tewari RLG, where it comes from and the how Mr. Tewari’s Space Vortex Theory led him to the RLG. Even if you are familiar with the Tewari RLG, there is some history here that many are not aware of and this is coming straight from his son, Anupam, so is authoritative and historically correct.
Jim Murray shares his insights into segregated load analysis, looping overunity systems and other related topics.
Jim Murray will be presenting at the 2018 Energy Science & Technology Conference. Out of 150 seats, only 64 are available so register and get your tickets while you can – http://energyscienceconference.com
Use this coupon code to receive a 25% discount on any of Jim Murray’s presentations (this code works on Paul Babcock’s presentations too, which you can find on emediapress.com!) Discount code expires March 31, 2018: JIMPAUL25
Paul Babcock discussed this core material a long time ago starting with an interview I did with him near the time of our first conference. You can search my channel for Paul Babcock and related interviews: Paul Babcock
This is a very simple and effective way to make a core for an electromagnet that has very fast switching times and this is important if you want the oscillatory transients to have the highest possible voltage – this is what most people call the “spike”.
The video shows an entire how-to on this method – it could have been a 5 minute video, but I decided to just show the whole thing to answer any possible questions.
The 2018 Energy Science & Technology Conference is shaping up better than expected. Over 1/3 of the seats sold out in the first two days of opening up for payments! This will be another jam-packed conference with some very powerful presentations. Many attendees would come just to meet and learn from the Special Guest presenter Saturday evening – wait until everyone finds out who it is!!
Here’s who is coming so far: Jeane Manning, Susan Manewich, John Petersen, Ken Wheeler, Eric Dollard, David Alzofon, Jim Murray, Prof. Robert Haralick, Dr. _______________ – our surprise guest presenter, Yaro Stanchak and others will be listed soon.
Jim Murray is one of the most important engineers today. He has a very long track record that goes back decades and he worked with and has been mentored by some of the brightest including Guy Obolensky and others.
Some of his many accomplishment include the Dynaflux Alternator, which is a unique generator that outputs more electrical work than it takes to turn it. Jim presented on this at one of our past conferences and since the patent has expired, he was gracious enough to give a full disclosure on what was missing from the patent as well as giving his blessing for anyone that wants to do anything they want with it. Learn more here: https://emediapress.com/shop/dynaflux-alternator/
Another profound development of his is the Transforming Generator. If you’ve ever seen in the movies where a motor goes into hyper-drive runaway mode that could self-destruct if not kept under control, the Transforming Generator is just such a machine. You can see a part of a demonstration of that in a YouTube video embedded on this page – anyone serious about overunity technologies will add this to their library. https://emediapress.com/shop/fundamentals-transforming-generator/
He also invented the SERPS, which was demonstrated at the conference. It lit 50 watts of bulbs for a net cost of only 1 watt – literally, this is around a 5000% gain in work produced compared to the loss on the input. https://emediapress.com/shop/secret-teslas-power-magnification/
Needless to say, Jim Murray is one of the rare pioneers of the modern-day free energy movement and it is a rare opportunity and a great honor to be in the audience when he presents.
Many people are interested in overunity technologies, but they do not even understand what unity even means – especially those that are convinced that that do. Jim Murray will be sharing very important information for anyone that wants to be set on the right track – it will be accurate and authoritative and you will only be able to hear this at the 2018 Energy Science & Technology Conference.
Matthew Jones and Dave (Turion) at Energetic Forum have been working on this concept for years starting with the “Tesla Switch” and related circuits and have put countless messages into the forum freely sharing their work with diagrams, videos, pictures and data. Others like Bob French, Wantomake and others have studied this work and have made incredible progress.
This has been going on for years but is coming to the point where it is simply a relatively easy way to build a system that keeps its batteries charged up. And, this is at the point where it is simply undeniable any longer.
And then study Matthew Jones’ videos on how to modify a scooter motor for the project: https://www.youtube.com/user/mjones7947/videos There are 8 relevant videos there so subscribe to his channel and give his videos a thumbs up to show your appreciation for his sharing!
If you don’t know where to start, grab a drink, put on your seatbelt and read both threads start to finish. It will take you hours, but how much is a self running system worth to you? It works, I know several people who have built this exact system (them) and someone that has even verified their work.
There is more to come, but that should keep you busy for a while. I hope you see the value in this and the implications of what it means.
A university project created a cooling system that creates about 600% more work than it takes to run the system using memory metal.
At the 2019 Energy Science & Technology Conference, Geoffrey Miller will be presenting on a massive Newman Motor that he recently built. He’ll also be disclosing a very * RARE * device invented by Joseph Newman that most Newman fans have never heard of. There will be a demo of this device and all details necessary to replicate it will given!
By this time, the Laws of Thermodynamics had become widely taught, and so most electrical engineers did not take these claims seriously. Even today, 99% of scientists and engineers believe this is impossible, under any circumstances. 
The Homopolar Generator has always been known to be able to deliver electricity without bogging down the prime mover and Faraday knew this 150 years ago! 
Paul Babcock discussed this core material a long time ago starting with an interview I did with him near the time of our first conference. You can search my channel for Paul Babcock and related interviews: 
