URGENT – FREE ENGINEERING REPORT BY ERIC DOLLARD ON WHY THE GRID HAS BECOME DEGENERATED AND WILL ACTUALLY ASSIST AN EMP ATTACK INTO CAUSING MORE DAMAGE! Ask Eric Dollard questions live about this topic.
The letter on Eric’s recent presentation page has been changed. We were waiting for this report and only just now have it available. Whether you have this presentation or not, READ THIS!! If that doesn’t make you concerned about what the grid has become, then nothing will.
Share this far and wide!
Anyone who does have this presentation by Sunday will be invited to a LIVE CALL with Eric Dollard (by email) to ask questions and discuss this very important topic.
Electrocuture if over 270 years old and is the science of using high voltage to influence the growth of plants. Plants grow faster, stronger, need less nutrients, pesticides and other additives. Many of these methods are to simulate the Earth’s natural dielectric field that exists between the ground and the ionosphere.
Throughout almost three-hundred years of experiments, field trials, stringent academic research, etc. it has become indisputable that simply using electrostatic potential can drastically alter how plants grow.
Another benefit is that if only high voltage potential is used, current is not flowing so it does energy is not expended on the plant. The only energy loss is in the transformer’s magnetizing losses in order to create the high voltage field. It is a true free-energy technology because the increase in growth in the plants is way more than the energy expended to treat them.
In the last 1980’s and early 1990’s, a large pharmaceutical giant had some scientists on their team that were experimenting with high voltage fields on cells and no matter how the cells were deprived of light, oxygen, nutrients, etc. they continued to thrive as long as they were exposed to high voltage fields.
Get 25% off for a limited time with this coupon code: BIO25
That was the inspiration to move into other experiments where germinating seeds and fertilized fish eggs were treated and something very unexpected happened. Growth not only increased, but the gene expression changed!
When corn seeds were treated, they went on to grow corn that had 5-12 ears of corn per plant!
When fern spores were treated, they grew into a fern that had been extinct for over 1 MILLION YEARS! Top image is the normal fern you seen today. The one below that is what grew after the treatment and fossil evidence shows that the non-micro serrated fern leaves have not been in existence for over 1 Million years!
When wheat was treated, it grew “SUPERWHEAT” that was ready to harvests in 4 weeks rather than 6-7 months!!! The ears were smaller, but there were more per plant. That is about 650% FASTER than normal wheat and it is stronger, more nutrient rich, more disease and pest resistant, etc.
When trout eggs were treated, trout hatched that had “Salmon Hooks”, which had not been seen on this trout for over 150 years since they had been extinct! The one on the left is the normal trout of today. The one on the right is what hatched after eggs from the type on the left were treated. They grew “Salmon Hooks”, grew about 30% bigger, 30% faster, were more disease resistant, were stronger and more aggressive swimmers, etc.
The video excerpt below does not go into this amazing and unusual but highly beneficial effect, but is but a small sample of what is discussed in this presentation.
GMO (Genetically Modified Organisms) promises to feed the world, have more disease and pest resistant plants, more abundant harvests, etc. but the empirical evidence is that it is Pandora’s box where none of these benefits are realized long term and they are causing environmental and financial catastrophes all over the world. This is why so many countries are banning GMO seed crops because it isn’t speculation, it is fact that GMO plants are dangerous, cause cancer, among countless other negative effects.
High Voltage seed treatment simply supplies the potential for germinating seeds (or eggs) to access the dormant genetics that are ALREADY inside the DNA. Therefore, no genes are changed, the potential is there to simply access the genetic programming that nature itself has built into the plants.
The potential is for larger and faster harvests with higher quality food, less fertilizers and little to no herbicides or pesticides. And, for the fact that it takes almost no energy to accomplish these amazing benefits, we could very well be on our way to abundant food production for the entire world without crossing the danger zone that GMOs are known for.
At the 2018 Energy Science & Technology Conference, more revelations are disclosed about the last one year of experiments with the Zero Force Motor.
Within this follow up presentation, you will find all the specs, which should be considered a standard built for more experiments to get start with. It works and has already been proven out by Yaro Stanchak and James McDonald.
Yaro also shares the differences in more detail on attractive vs repulsive mode and how this looks diagrammatically so the viewer can benefit from these findings. A thorough walk-through on the Zero Force Motor’s timing characteristics of the magnet’s geometry in relation to the coil geometry is covered. This is very important and cannot be stated enough – timing is crucial and can make or break your results.
Get 25% off for a limited time with this coupon: ZFM25
Keep in mind this is a developmental process and there are no free energy claims. It is a novel motor with unique aspects that have not been used or exploited in conventional motors and bit by bit, the potential of what this machine is capable of is slowly revealing itself.
Pay close attention to the date in the table presented by Yaro. You may find there is more than meets the eye. And you will definitely see that at certain RPMs, which may indicate some resonant points that you will see the Hidden Dance happening within the machine as Yaro shows on the scope.
There is also a difference in the characteristics of how the motor operates in relation to its waveforms that are measurable if the ZFM is running on a battery compared to a linear current power supply. In other words, there appears to be advantages to running it on a battery compared to a power supply. Professor Robert Haralick during questions points out a very plausible reason for this and that is that when running, the ZFM is producing longitudinal waves that are accepted by the battery(s) but the linear amp power supply cannot.
This would be completely consistent with John Bedini’s experience over the years with experiments on the Bedini SG when running on and charging batteries, which have shown unusual input vs output ratios and most of this disappears when running these machines on conventional power supplies. It has been stated over the years that the battery is very important as part of the open system and once again, these ZFM experiments shown by Yaro seem to indicate the same results.
Here are a few of the subjects that Yaro will show in this presentation:
Introduction and Brief Review Of Zero Force Motor Design and Operation
Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea, was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.”
However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft. Therefore, it quickly became evident that not all of the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized.
What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts. Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.”
The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses.
During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.
Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well established science of corporate book-keeping.
Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact. Both efficiency concepts shall be fully explained in this presentation.