Posted on 1 Comment

Chris carson’s rotary electrotatic converter

Watch this video and the read below to understand the significance of the Rotary Electrostatic Converter:

Chris Carson was an a friend of Eric Dollard who was a gifted electrical engineer. The following is a post on Energetic Forum by Eric, which is worth reading so you can get the context of what Chris Carson’s machine is about – the original post can be found here: http://www.energeticforum.com/90090-post71.html

There are some very serious misconceptions in the world of Electrical Engineering today. (The writings of Oliver Heaviside and Proteus Steinmetz gravely warned about this…) Let us start with the YouTube MIT Physics Demo video that Armagdn03 posted a link to on 11-10-2009 on page 2 of this thread. This is a good demonstration for several reasons.

1.) Glass is a dielectric which can store electrical energy within its physical form. This should be common knowledge and not a surprise to anyone today…

2.) That this simple fact and reality “blows some people’s minds” clearly illustrates that it’s just all gone way, way, too far… The Einsteinian Lie has succeeded in instilling a mind virus in most everyone and also in confusing Main Stream “Scientists”, who today waste billions of dollars of funding each year, only to chase their own tails in a canonic sequence.

Chris Carson Built the Rotary Electrostatic Converter. His design was based entirely on my electrical theory and math. It was designed to demonstrate and validate the concept of Synchronous Parameter Variation and the Four Quadrant Theory of Electricity. The device worked well. It had to spin up to around 10,000 RPM. This unit took Chris months to complete; to get all of the parts together, and to get it perfectly balanced and operational. Chris determined that it was starting to exhibit the effects of synthesis of electrical energy from the electrostatic field. This is a result of the variation of capacitance (C in Farrads) with respect to time (T in seconds) which results in a negative conductance G (in Siemens). Hence the generation of electric energy. Then, disinformants, whom I refer to as the “Montauk Crowd” swooped in on him after he completed this device, and he was never the same again, – he died of Brain Cancer a year or two later…

Chris Carson’s Rotary Electrostatic Converter

There was also the Rotary Electrostatic Converter, constructed by Michael Knox and Peter Lindemann with the help of Chris Carson. This unit exhibited the property of materializing and dematerializing electric energy without regard for the Law of Conservation of Energy. This is another example of synchronous parameter variation. In this case inductance (L in Henrys) time (T in seconds) gave rise to positive resistance (R in Ohms), hence the unaccounted for destruction of electric energy. It must be just as illegal to destroy energy as it is to create it – don’t you think? E is NOT equal to MC squared. There is no Matter to Energy equivalency – this is: The Great White Lie…

(Where is the video that was made of this device being tested with my Navy electrical switchboard instrumentation anyway????)

I have a device, built for the Army Air Corps during World War 2, A/N number PP-18/AR Power Converter, which self-sustains the electrical system in my car. It uses the same theory of operation as Chris’s device but involves a different mechanical implementation utilizing a vibrator, several capacitors and 12V and 24V batteries that are connected in parallel through the device, rendering them as one.

I had a young student from Korea visit me a few years back. He had no problem understanding the basic concept of producing an energy synthesizing apparatus, because his mind was uncontaminated by all of the Bedini/Bearden falsehoods. The term Scalar Wave is an oxymoron, as scalar is part of the propagation constant that is NOT A WAVE! (Idiots!)

Most are clueless about the importance of the Variation of Inductance and Capacitance with respect to time – and synchronous parameter variations. Read chapter 21 (XXI) titled REACTION MACHINES in Charles Proteus Steinmetz’s book titled “Alternating Current Phenomena”. There is also a Russian paper (brought to me by the Korean student as a gift) titled: “UBER DIE ERREGUNG VON ELETRISCHEN SCHWINGUNGEN DURCH PARAMETERAENDERUNG” von L. Mandelstam und N. Papalexi, published in 1934 in: J. ZEITSCHRIFT FUR (umlaut on the U – as should also be on the first U in the title of the paper) TECHNISCHE PHYSIK Band IV, Heft 1, that continues with what Steinmetz teaches in his books, and takes it all the way (Title translation: Concerning the Excitation of Electrical Waves Through Parameter Changes). In one picture in the paper, there appears to be a brightly glowing incandescent lamp connected to a network, with no apparent connection to a power source. It appears to be an Alexanderson type Mag. Amp. operating in a self oscillation mode. (Alexanderson Patent # 1,328,797 Jan. 20, 1920): Even though my copy of the paper is in Russian, the equations speak for themselves and echo the work of Steinmetz and Alexanderson. Ernst Alexanderson emigrated to America because of Steinmetz’s book, – he was determined to work with Steinmetz after studying it. Steinmetz was forced to reverse many of his equations in later books and was severely criticized by physicist Michael Pupin of Columbia University for not using Maxwell’s ideas and instead developing a methodology that was actually useful and practical for engineers. (Read, “Steinmetz, Engineer and Socialist” written by Ronald R. Kline.) Here it was said that General Electric gave Steinmetz permission to create Electricity form the square root of minus one…

I personally created so much Electricity form the square root of minus one out of the compressor plant’s synchronous machines at the Richmond Ship-yard that I was working in at the time (which also housed one of my laboratories) that it tripped the reverse power relays of the Richmond substation and shut off all power to the City of Richmond. For that to have happened, means that the City of Richmond was producing more power than it was consuming, hence the reverse power relays tripped and shut the city down. PG & E trucks were there almost immediately. Shortly thereafter, I presented my Four Quadrant Theory to Pacific Gas & Electric Co. executives and engineers on behalf of the lease holder of the shipyard and they became my friends (however they would not allow the shipyard meter to turn backwards). So much for Corporate Suppression… In actuality PG & E would love to have energy sustaining devices connected to their power grid. Profits would soar and pollution would drop. Such devices tend to operate above 500 kva and are not scalable into smaller devices, and therefore are only appropriate for substations. In West Marin, the Tocaloma PG & E substation on the Ignacio/Olema 66 kv line, has only one line for both the input and output. It represents the vestige of such devices, – an installation that has been in operation for at least 70 years. Today, probably no one in PG& E, even knows how it all works. (Don’t expect the lights to stay on for too much longer… today, engineers have been replaced by lawyers and safety has been replaced by insurance. It’s a LET-IT-BURN policy…)

At the time, the Bolinas RCA-Marconi Station, through corporate encouragement by RCA and Bell Telephone, gave me free run of that site to set up one of my laboratories. My plan was to produce a system utilizing no rotating machinery but only static devices, such as coils and condensers in an Alexanderson configuration to possibly power the town of Bolinas and at least provide PG & E with all of their reactive power needs. The network experiments would consume no energy to operate and therefore cost nothing. The plan was to use the electrical substation on-site to connect to PG & E’s grid, giving power to them for free, in exchange for being able to use the 12kv power line for my experiments. Everything of importance including engineering records and notes as well the equipment at the Bolinas RCA-Marconi Station was destroyed by State of California Environmentalists through Jerry Brown (former California Governor) and the environmental politician Burr Henneman, this in conjunction with The National Park Service. The NPS is an EMBEDDED FOREIGN ORGANIZATION within the United States Government. Massive quantities of polychlorinated biphenyls and mercury were released into the environment by environmentalists in their endeavor to destroy the Station as quickly as possible. (See the link already posted by phi1.62 on 01-21-2009 on page 2 of this thread) The same group destroyed my Civil Defense Facility in the town of Bolinas which was on the property of Nashama Franklin. The same property was embezzled afterwards from Ms. Franklin by the same crowd that embezzled the Reynolds funding.

Also in Bolinas, U.S. Coast Guard Communication Station NMC worked with me on certain problems they were having and their reutilization of the RCA site. This enviro-group went to NMC and warned them of the consequences of doing business with Eric Dollard. Today NMC cannot even be heard in Half Moon Bay 50 miles away, if they are on the air at all. (Who needs Bin Laden?) Who doesn’t like Tesla then? Is it the government? (no). Is it the environmentalists? (you got it) They call themselves Commonweal. Altman link

As far as inventing the log periodic: it was invented by Raymond H. Du Hammel, I believe, as an Air Force Project and the University of California Berkeley was where most of the work was done. Check patent number: 2,985,879, it is a fascinating design.

On the other hand, I did invent the Log Periodic Multiple Wave Oscillator based on the initial Lakhovsky patent. I got rid of all the bull and added a Golden Ratio Log Periodic antenna which was etched out of a double sided printed circuit board and then Gold plated which was widely sold and probably still is, for which I did and do not receive a dime. It seems to have some sort of radionic effect even with out power being applied.

Individuals in the guise of Borderland Sciences embezzled $50,000, money that R. Joshua Reynolds had provided me with to continue my research. At the “Last Supper” where Joshua invited everyone for dinner, (everyone that he had funded with millions of dollars that is) he cut off funding for Andrea Puharic et al (the Soviet Scalar Conspirators) and pronounced that I had done more on USDA food stamps than any one else that he had funded. Needless to say, I made no friends at the dinner table that night… The Voodoo was hideous…

Am I concerned about the CIA, the NSA or any other alphabet soup organizations’ supposed suppression or retribution?… No! Common swine that’s who I am concerned about. An example of this is a situation that I encountered in Montana. A group in Missoula (which was later found out to be a group of international criminals) showed up to “HELP ME” and in trade I would help them extract gold from spent tailings utilizing Tesla methodologies. They helped me alright, by entrapping me, assaulting me and stealing my classic Celica and threatened to kill me if I were to do anything about it. They strong armed their way into my Desert laboratory to steal all related equipment. The property owner of the desert lab died shortly thereafter, within weeks of Chris Carson’s death. Friends of yours Peter?

As is well known, I was the last engineer involved with getting the Integratron operational. My efforts were thwarted and ruined, not by the Men in Black, but rather by the Woman in White. Today the Integratron is a Goddess worship temple…

So in light of all the above, why should Eric Dollard involve himself in the useless or criminal behavior of others. There are those who wish to republish my earlier writings and to make this information freely available to everyone. Unfortunately, much of it has already gone to the dump. I have no interest in teaching anyone about Tesla except under the department of the Navy or the likes thereof. The door is shut!

73 DE N6KPH SK

1 thought on “Chris carson’s rotary electrotatic converter

  1. Variation of capacitance may be automatic among the coils of a transformer.[1] By placing a variable capacitor across its primary and secondary coils, it may be possible to take advantage of this tendency.

    Under simulation, it appears to work very well…

    https://is.gd/parapulse

    This fulfills Eric’s comment in the video, up above, that Chris Carson’s device needs to be hooked up to additional components in order to facilitate the addition of electromotive force so that Chris’s device could become electrically useful.

    Footnote…
    [1] https://www.quora.com/Why-is-California-strapped-for-electricity-supply/answer/Vin-Yasi?ch=10&share=11980ea1&srid=3zXXZ

Leave a Reply