Posted on Leave a comment

11th Annual Energy Science & Technology Conference – Location Change & Price Drop!

2021 Energy Science & Technology Conference

Due to the ridiculous increases in lodging in the Coeur d’Alene and Hayden, Idaho area, too many attendees cannot afford it. Therefore, we’re moving the conference into the Spokane area where conventional lodging is less expensive, but there are also a LOT of AirBNB spots available at low cost that are close to the conference.

The NEW location for the conference is in the most unlikely venue – it will be right in our own shop since there is space! That saves on a lot of costs and as rare as it is, we are passing the savings on to you by lowering the conference ticket prices.

Normally, we limit seating to 150 but this year, since it is at our shop, we’re limiting it to ONLY 50 SEATS and these are going to go very fast.

We’re also going to offer live-streaming but it’s a challenge to get a human being to respond from any company that offers live streaming options. IF you want a live streaming ticket, please do not purchase a general admission in-person ticket because we will not give a partial refund in order to downgrade the ticket to a streaming ticket. There is a chance live-streaming won’t be an option and if not, you take the risk of missing out altogether and will have to wait until the presentations are available as paid digital downloads.

The ticket prices have been slashed drastically and you can get one here: https://emediapress.com/event/2022-energy-science-and-technology-conference/

The new location (in Spokane, Washington rather than Hayden, Idaho) is listed on the website along with other details: https://energyscienceconference.com/

The updated schedule is here: https://energyscienceconference.com/2022-conference-schedule/

For lodging, etc. details, go here: https://energyscienceconference.com/location-accommodations/

Posted on Leave a comment

James DeMeo, PhD Passes

Dr. James DeMeo, 2021 ESTC

Sometime after last year’s conference, James told me he had gotten ill and lost a lot of weight but it sounded like he was getting better. I was shocked to learn today that he had passed.

He was always in good spirits and always took the time to explain things to people to make sure they understood it. He was a courageous fighter who always published his work despite the fact that much of it flies directly in the face of “accepted” science, which is of course the whole point.

He absolutely left a powerful and valuable legacy behind in his presentations and writings and he will always be remembered fondly for his humor, his integrity and his passion for truth.

Please go here for his obituary: https://wilhelmreichmuseum.org/obituary-james-demeo-phd/

Posted on Leave a comment

Recorded – Aaron Murakami Interviewed by Killah Priest of Wu Tang Clan

Aaron Murakami on the Killah Priest Podcraft

Here’s a 3 hour interview where I cover a variety of topics sort of like a sampler – consciousness, aether, dipole, gravity, open systems, etc. and even a few Cosmic Induction Generator demonstrations at the end. Special thanks to Vinny B for making it possible to introduce our work to a new audience!

Posted on Leave a comment

2022 Energy Science & Technology Ticket Sales Open!

General admission and student admission tickets are available now for the 2022, 11th Annual Energy Science & Technology Conference. Location is the Hayden Lake Eagles in Hayden, Idaho, which is about 50 minutes from the Spokane International Airport in Spokane, Washington. Dates are July 6 to 10 (Wed to Sun). The tentative schedule is posted here: https://energyscienceconference.com/2022-conference-schedule/

The tickets include the 5 meals (4 lunches and 1 dinner) served at the conference – there is no option to not have meals included and the two different ticket options are the only options. Admission includes full access to all 5 days and all presentations, meals and demonstrations.

There are a few more presenters I’ll be listing soon on the schedule page – just been extremely busy with the new move into a new shop and am still catching up. Go here to get your tickets now – there are only 150 seats available and that’s it. The ticket sale page lists 150 for General and 150 for Students but its actually a combined total of 150. Go here and click the + sign for each quantity of the type of ticket that you want. https://emediapress.com/event/2022-energy-science-and-technology-conference/

For VENDOR & PRESENTER/VIP/GUEST tickets, I’ll announce those soon.

Posted on Leave a comment

Thane Heins to Present at 2022 ESTC – Under One Condition

Thane Heins

Thane Heins contacted me to present his RegenX Motor and Generator technology with a claim of infinite COP. I’m aware of his work over the years, the claims, etc. and I will reserve judgement on the validity of such claims.

My condition is that he allows me to pick my own experts to independently measure/validate his claims at the conference live in front of the attendees on possibly Wed or Thur of the conference, a few days before he presents.

Regardless of what the testing shows, he is still welcome to present and everyone can make up their own mind.

The test results will be included with the video presentation made available after it goes into the Emediapress.com catalog.

“For validation, it must be completed by my own experts.” – Aaron Murakami

NO PROBLEM BUT WE OUGHT TO START RIGHT AWAY… GET YOUR TEAM ON THIS ASAP – DOOMSDAY CLOCK IS TICKING!” – Thane Heins

He agreed so I’ll expect him to honor his word as himself just as I do. I have declined his offer to provide me with his own third party testing validation. It must be with experts of my own choosing and the attendees will have an opportunity to learn proper testing procedures to verify input vs output. It will be done with accepted standards and methods that apply equally to both over and under 1.0 COP rotating machines.

I highly recommend purchasing a copy of Jim Murray’s book, since it is definitive and authoritative: The Meaning of Unity in Energy Conversion Systems

That book is based on this video presentation of the same title by Jim several years back, which is available here: The Meaning of Unity in Energy Conversion Systems

Posted on Leave a comment

New Frequency Calculator on RPX Page from Tesla Scientific

Tesla Scientific

Special thanks to Simon Davies aka dR-Green (on Energetic Forum) for creating a simple, user-friendly calculator on the new RPX website. Everyone can instantly see what audio frequency needs to be mixed with the 3.1 MHz carrier in order to create sidebands that are rich in harmonics for ANY frequency they want.

Simon has been replicating much of Tesla and Dollard’s work over the years and his calculators are accurate so if you want to know how to calculate windings and other parameters for your experiments, he has both free and paid calculators available at: Tesla Scientific

Here’s an example of how you can use this calculator and the RPX as a 432 Hz harmonic generator, which nobody else is doing.

You take the carrier of 3.1 Mhz and divide it by 432 = 7175.93

Round up or down to the nearest whole number = 7176

Multiply your desired frequency of 432 x 7176 the multiplier = 3.100032 Mhz sideband that will be created

The difference between the sideband and carrier is 32 Hz

Therefore, if you use an external signal generator with the RPX and you input a sinewave limited to 2 volts with a frequency of 32 Hz, it will create a sideband of 3.100032 MHz, which is a multiple of 432 Hz and it will have a whole lot of harmonics of that frequency.

This can obviously be done with any desired frequency – why not use Rife’s brilliant method to create frequencies for your frequency needs? Everyone else is just focusing on the fundamental frequency but are completely ignoring the fact that the real power comes from all the harmonics.

Go to the calculator here, enter the desired frequency and hit return. You’ll instantly get the audio frequency needed to be input into the RPX to do the above: https://emediapress.com/rpx3#resources

Posted on Leave a comment

Wu Tang Clan Member Interviews Aaron Murakami March 14, Monday at 5pm Live

Special thanks to Vinny B. from New York for scheduling me as a guest on Killah Priest’s live streaming YouTube channel. The show is this coming Monday the 14th at 5pm pacific time zone and will last until 8pm – so 3 hours of discussing some of the work we do, what projects are coming up, conference details, and more – will be educating a new audience to the reality of free energy and some aether physics and history behind validating its existence. We might even go into consciousness, agriculture and whatever other topics we happen to flow into.

Killah Priest’s podcast has featured quite a few controversial topics and on this show, I’m going to debunk the nonsense against free energy, the aether and other related topics.

Eric Dollard will be a guest in an upcoming show when he gets up here to Spokane. The channel for the show next Monday is: https://www.youtube.com/channel/UCf4YrASCXJC4Tu1glCLVLpg

Posted on Leave a comment

Successful Telluric Earth Transmission Test at EPD Laboratories, Inc. Jan 9, 2022

Eric Dollard & Griffin Brock - Telluric transmission test

Here’s the video of the initial Telluric Earth Transmission test we performed on Jan 9, 2022. The frequency is around 1.8xx mc and was transmitted with the coils built by Griffin Brock. It was sent into the old gas lighting distribution pipes of the town and Steve Young was able to pick it up about 2 miles in either direction.

Your donations make these projects possible. Please consider donating to EPD Laboratories, Inc. a 501(c)3 non-profit organization – all donations are tax deductible. Donation info is in the right column at https://ericpdollard.com

Posted on Leave a comment

Self-Sustaining Charge in Electrostatic Rotary Converter built by Chris Carson

Electrostatic Rotary Converter

Last month, Eric Dollard and I tested the generator action in Chris Carson’s famous Electrostatic Rotary Converter – it produces a sine wave without depleting the electrostatic charge initially applied to the capacitor.

This video will show you the whole test – flea power but proves the concept nonetheless. John G. Trump, the master of this principle, a patent holder and Chris Carson mentioned the self-sustaining effect and said it takes a very long time before the capacitor is needed to be recharged – and that looks to be the case. Eric Dollard believes this to be the ultimat generator for the Tesla Turbine – no coils, no magnets.

It creates this by varying capacitance to respect to time as it bounces it back and forth. Eric Dollard said it creates a negative admittance so that it produces energy rather than consuming it. That is what is meant by self-sustaining – the charge in the capacitor stays up while producing a sinewave on the output to the load. More testing is needed – the capacitor does go down but that is spacer, moisture, etc. and not by producing a sine wave. More to come…

Please donate to EPD Laboratories, Inc. a 501(c)3 Non Profit to support the work of Eric Dollard. This was all made possible with donations. Donation info is available in the right column at: https://ericpdollard.com

We have have more on this topic at the 11th Annual Energy Science & Technology Conference this July. https://energyscienceconference.com

Posted on 1 Comment

EPD Laboratories, Team Project Jan 6-10, 2022

EPD Laboratories, Inc. 501(c)3 - Eric Dollard

Early last month, 4 of us from Spokane and several other team players from California converged at EPD Laboratories, Inc. to get some projects completed. We succeeded and it couldn’t have happened without your donations!

Here is a slideshow that will explain quite a bit and in the next newsletter(s), we’ll show you the videos of the telluric test and the rotary electrostatic capacitor test that proves that John G. Trump was telling the truth about his masterpiece.

Please donate to EPD Laboratories, Inc., 501(c)3 – all donations are tax deductible and they get put to good use! Donation instructions are in the right column of https://ericpdollard.com – just scroll down for info on donations by mail or PayPal – thank you!