Early last month, 4 of us from Spokane and several other team players from California converged at EPD Laboratories, Inc. to get some projects completed. We succeeded and it couldn’t have happened without your donations!
Here is a slideshow that will explain quite a bit and in the next newsletter(s), we’ll show you the videos of the telluric test and the rotary electrostatic capacitor test that proves that John G. Trump was telling the truth about his masterpiece.
Please donate to EPD Laboratories, Inc., 501(c)3 – all donations are tax deductible and they get put to good use! Donation instructions are in the right column of https://ericpdollard.com – just scroll down for info on donations by mail or PayPal – thank you!
In 1999, I met John Bedini for the first time and was introduced to the work of Tom Bearden soon after. Tom was always championing the work of John Bedini and was very dedicated to translating this and other related work into terms the he believed would be academically acceptable. At that time, 23 years ago, most of what Tom Bearden was saying was to complex and I really didn’t get it.
A few years later after I purchased a vitamin/health food store, which was my full time business at the time, a friend, Mark Comings, was in town and gifted me a copy of Free Energy From the Vacuum by Tom Bearden, which was basically a bible of Free Energy technologies described by Tom Bearden in his very complex academic language and the references were often many times longer than the actual text to describe something.
After a while, I finally understood what Tom was saying. Although I disagreed with many of his conspiracy theories and other ideas, what he teaches about the dipole and source charge and his pointing out of the reality of open non-equilibrium thermodynamic systems, which come from Ilya Prigogine, were two of the most important contributions to the field of “Free Energy” ever and for the most part, I still feel are conceptually indisputable to this day.
Over the years, we’d have some back and forths by email and he’d send positive words of praise about our books and videos so encouragement was the central focus of our personal communications – thank you Tom and thank you for all of your tireless support of the important work of John Bedini!
Please see Tom Bearden’s full obituary here: Tom Bearden
It’s very exciting to finally release version 3.0 of the most authentic Rife Frequency generator manufactured anywhere in the world. The link at the end of this sentence titled “Rife Machine” takes you to the Vril.io RPX page that explains why that is true – scroll back up to this link but read this page first: Rife Machine
Below is a sneak peak at the Bedini RPX 3.1MHz Sideband Generator v3.0 – “Rife Machine”. If you’re not familiar with what a sideband generator is, the above link will take you to a page that explains it. Any machine that correctly produces “Rife Frequencies” the way that Rife and his assistant Philip Hoyland did must be done with “sidebands” or it is not a Rife Machine – this is an indisputable, historically-documented fact.
RPX stands for Rife, Priore and an X-Factor but it really should stand for Rife, Priore and Bedini because what his genius incorporated into the RPX is in fact the X-Factor. When we release the v3.0, you’ll learn why the RPX is far superior to any other device even remotely similar and there is only one that is close that I know of and that John Bedini truly was the world’s leading authority on what Rife was doing.
DISREGARD THIS BLOG POST, THE RPX 3.0 IS ALREADY AVAILABLE FOR PURCHASE – GO HERE FOR THE NEW WEBPAGE: RIFE MACHINE
First, here’s a picture of the original unit – it worked perfect but was a bit cumbersome since you have to connect an external signal generator and external battery but this is how John Bedini originally released it late 2014 or early 2015. Below, you’ll see the obvious point to the new RPX 3.0 and why my goal was to make the most user friendly “Rife Machine” ever developed and it has been successfully accomplished.
Below you can see the prototype (no logo or labels for the knobs, switches or jacks). The signal generator inside was designed by Paul Babcock so this couldn’t have happened without his brilliant help. Others were kind enough to offer their services to design one in the past but at that time, the cost was prohibitive, plus, I wanted to stay away from digital as much as possible because digital is fake and analog is of the real world. THE SIGNAL GENERATOR IS 100% ANALOG. Both Rife and Bedini would be thrilled about that!
The LEFT KNOB controls the TIME of the sweep. Specifics will be forthcoming.
The SWITCH between the knobs in the down position leaves it in WIDEBAND MODE so it sweeps from close to 0Hz up to 150kHz to create sidebands that are all even multiples of EVERY SINGLE Rife Frequency automatically without having to. Rife went to 40kHz because that was the upper range of a typical audio signal generator. Why go to 150kHz? It’s one of the things that makes this superior to any sideband generator that creates the Rife Frequencies and I’ll show the math and demonstrations for this so you understand what this means and why it is important. What did Bedini know that Rife and Hoyland possibly didn’t? You’ll find out soon on the page where these units will be available for pre-order on February 17th, 2022.
The RIGHT KNOB controls the narrow band sweep. When the switch is in the up position, it activates the narrow band mode. I’m asked all the time about focusing on certain frequencies. It’s always a bad idea to use any single static frequency as a “wobble” or variation in the frequency was always what was found to be superior. So within the 150kHz range, the narrow band will focus on a 25-30kHz range. If the knob is all the counterclockwise, it will sweep from almost 0Hz up to about 25kHz and as you rotate the dial clockwise, it will keep a 25-30kHz sweep width but higher up in the 150kHz range. There will be a chart printed on top of the case that shows you what frequency range you are at based on the number on the dial, which will be printed on the front panel.
Scroll down to the top of the next picture for an explanation of the rest of the features on the front panel – I just want to break up the text a bit to make it easier to read.
The switch at the top next to the gold RCA jack allows you to use the internal signal generator, which is all anyone will need 99.99% of the time. In the down position, you will be using the internal signal generator and the two knobs and switch to the left. But for those of you who are more technically oriented, you can move the switch in the up position and you can then plug in your own signal generator into that RCA jack. ONLY USE SINE WAVE AND LIMIT THE OUTPUT VOLTAGE OF YOUR SIGNAL GENERATOR TO 2 VOLTS MAX or you can damage the unit. You will able to narrow the sweep to perhaps a few kilocycles on either side of a target frequency to get more specific, extend sweep times beyond what is possible with the internal signal generator or even use frequencies that will produce sidebands that are even multiples of frequencies like 432Hz or any other frequency set of numbers using this method. We’ll teach you how to calculate all that with videos that will be available.
The RED and BLACK banana jacks at the bottom are the output jacks. We supply a cable that you can plug into that and on the other end are alligator clips. You only have to supply your own electrodes. Inexpensive copper tubing from a hardware store than you can get for a few dollars per foot is all you need. Two pieces about 4″ long and maybe 3/8 to 1/2″ diameter is sufficient. Conductive gel is recommended and this one is the only one I could easily find that is free of parabens – this is our Amazon affiliate link: Conductive Gel
If you’re mechanically inclined, we’d recommend cutting off the alligator clips and soldering the wires to the tubes or adding ring terminals and screwing them to the tubes. Later on, we may recommend a company where you can get some electrodes.
The top right LED light is a RED power light that shows the RPX power is turned on (switch is on the back).
The LED directly under that shows when the PUMPWAVE is on and it will also be RED – just the prototype has the blue light and its just too bright. The switch underneath that can be switched to turn the Pumpwave off and on. This is another one John Bedini’s genius innovations. With the switch off, you can still get the classic Rife Frequencies with the 3.1MHz carrier and sidebands. With the switch on, you get the low frequency carrier (another carrier) that puts the 3.1MHz carrier and sidebands on it and that Pumpwave is a 8-9Hz square wave that takes electrode delivery to another level. Literally, there is nothing that compares to the Bedini 3.1MHz Sideband Generator v3.0.
Above the next picture is a description of what is on the back of the RPX.
The jack and switch below will be flush with the panel on the final units. The jack on the left is for a 16.8 volt 1 amp, regulated lithium-ion charger. The red light on the charger will be on while it is charging and when it is finished charging, the green light will come on. You will not be able to use the RPX while the battery is charging – plugging in the charger will disconnect the battery from the circuit. Please charge the battery fully before using the RPX for the first time. The average use time the RPX is on is about 15 to 30 minutes so you will get a good number of uses before you have to charge the battery again. The switch on the right is the off/on switch to turn on the power. In the down position, it will be off and in the up position, it will be on.
I’ll make a video walk thru and will put that on the RPX page when pre-orders are open on February 17th along with pricing, etc.
The RPX v2.0 model sold for $425 itself (required you to provide your own battery and signal generator) or $650 for the whole combo kit that included everything except the electrodes. My goal was to make this new RPX 3.0 available for as close to the RPX v2.0 price as possible. The RPX v3.0 will cost more because my production costs are higher. The first 50 (most likely 50) units for pre-sale will be at a super low price compared to what the retail price should be.
Keep in mind that the next closest machine that even comes close to a “Rife Machine” retails for over $1800. That means that since this is a superior technology and it is a super specialty item not available anywhere else that the RPX v3.0 should have a retail price of around $2000 to $2500 (but it won’t be) and it would be worth ever penny comparing value vs value in terms of sale price.
Make sure to order as soon as the pre-order page opens up on February 17th because you’ll be pleasantly surprised with our pricing! You’ll also be earning points on emediapress.com that is good for credit toward digital downloads. More to come…
Remember to go to this page to learn more in depth about the truth about what a Rife Rife machine is and what it isn’t’: Rife Machine
Please donate to EPD Laboratories, Inc., 501(c)3 non-profit. All donations are tax deductible. Donation info is in the right column at https://ericpdollard.com
For an authoritative presentation covering the topic in the below video, go here:
On Dec 12, 2021, we held a live call where Eric Dollard addressed the Veritasium video in detail. After this topic is discussed, other topics were discussed. Listen to the call with a slideshow here:
Here is the second of two live calls from last year that were never released. There are two new ones but they will be posted in sequential order – soon.
This call covers a lot of topics so watch it here below – it’s 1 hour 41 minutes long.
Make sure to subscribe to my YouTube channel and give the video a like!
Make sure to help support EPD Laboratories, Inc. – donation info is available in the right column of https://ericpdollard.com
Eric Dollard talk some about Heaviside and his presentation that was given at the 2020 ESTC. Griffin Brock is also on the call to discuss some of his projects, which were the subjects of two presentations he gave at the 2020 ESTC.
We open up for some questions and there are planty of pics and URLs in the video for reference.
There are a whole range of topics covered on this call – the video is 1 hour 22 min.
Donate to EPD Laboratories, Inc. to support this work – all donations are tax deductible: https://ericpdollard.com/ – the donation info is in the right column of the EPD website.
Last year in 2020, at the 19th Annual Energy Science & Technology Conference, Eric Dollard presented: Electromagnetic Induction and its Propagation: A Sequel to the Work of Oliver Heaviside of the Same Title.
The presentation is available here: (PAPERBACK LINK IS BELOW THIS)
This presentation is being put into paperback form and will be several parts – most likely 3. Part 1 has now been released on Amazon as a paperback and in Kindle – that is available here: Electromagnetic Induction and its Propagation
This Part 1 will also be available in E-book form here on emediapress.com and we’ll announce this as soon as it’s available.
This coming Sunday the 26th at NOON PACIFIC TIME, we’re having a live call to specifically discuss this new paperback release.
Please MUTE your own phone when you get on the call. If you want to ask a question when we open up for questions, press 5* and you will be unmuted so you can ask your question. The call will be recorded and put online at a later time. Please keep your questions relevant to the topic.
It is recommended to at least watch this preview video of the presentation to get a feel for the content that is to be discussed.
A recent video produced by Veritasium discusses the energetic flow happening outside the wires. Not that this is a mystery but it does have about 9.5 Million views by now and nobody seems to understand the solution to the problem.
It seems that Derek Muller inspiration of this video came from a question proposed to him by a professor of his.
The video is pretty good although there are errors in his basic usage of some terminology, etc. it’s worth watching. Eric Dollard spend quite a bit of time scouring through the comments and couldn’t find a single one where anyone understood the situation so the solution is posted directly below the video – watch the video first and then real Eric’s solution.
LIVE CALL: We’re going to have a live call with Eric Dollard, which haven’t had for a long time. This coming Sunday the 12th at NOON Pacific Time. Call this number: 1-857-232-0155 then enter this access code: 582590 – we’ll discuss this video, the solution and anything else related to books or presentations by Eric Dollard. Please mute your phone when you log on.
HERE’S THE SOLUTION FROM ERIC DOLLARD, since most people commenting on the video are struggling to understand what is happening – it’s a very basic transmission line problem:
“First of all, there are a lot of assumptions involved so they have to be cleared away. The incandescent light bulb should be able to pass current in both direction (not LED), also, the light bulb resistance should remain constant regardless of what current or voltage is applied to it. So, in this case, we want the resistance of the light bulb to equal twice the impedance of the two transmission lines. Or, in other words, the impedance of the two lines in series. Also, the resistance and leakage conductance of the transmission line should be negligible or zero, as well as the permeability and permittivity equaling unity. This greatly simplifies the process by eliminating echoes. Upon closure of the switch, the light will light to half voltage. The two transmission lines will appear as resistors at the terminals between the battery and the light bulb. After the time it takes for a traveling wave to propagate from the battery light bulb to the short circuit at the end of the line and back, the light bulb will receive full battery voltage. There is nothing abstract about this; this is standard transmission line engineering.” – Eric Dollard
