This is a must have presentation because the Tesla Turbine is one of the “low hanging fruits” when it comes to a technology that is the closest to fulfilling a sustainable energy generator that can power your home or business. With relatively low temperatures, you can have a turbine spinning 10’s of thousands of RPM turning a generator that supplies electricity. There are many variations and applications of the Tesla Turbine technology and the particular one that Jeremiah Ferwerda is focusing on is the “cyrophorus” method.
WATCH THE FREE PREVIEW VIDEO ON THE WEBSITE!
That means there is a hot and cold side to the turbine – the warm water tank boils water at a low temperature because a vacuum is applied to it, that steam drives the drive stage of the turbine and the other side is a vacuum side that pulls a vacuum through the drive stage all the way to the water to keep it boiling at a low temperature.
Solar electricity is about 20% efficient if you’re lucky but what most people don’t understand is that using the sun to heat water is much more efficient. So, with not much effort to heat some water with the sun, you’ll have a solar battery that runs a turbine at high speed making electricity – literally, the concept is as simple as that and for this particular application of the Tesla Turbine, Jeremiah is further ahead that anyone else developing more and more efficient methods with the cyrophorus method. Imagine a solar electric system that winds up being 40, 60, 80 or even close to 100% efficient!
In 2020, Jeremiah presented other aspects of the Tesla Turbine system but that presentation was never released because we were not able to include a demonstration. We’re also releasing this presentation at the same time so you can get either the 2020 1.5 hour presentation or the 2021 1 hour presentation with demo or both at a further discount.
The first presentation we’re releasing is for both the techie and the layman – there is the how-to on our method of creating these special Tesla Coils with unprecedented levels of magnification as well as a plenty of eye candy with some plasma demonstrations that nobody has ever seen – a few of them were even Eric Dollard’s first time seeing them when we were doing some experiments at our shop in Spokane.
The Borderlands Of Nikola Tesla’s Resonant Transformer by Eric Dollard & Aaron Murakami
When new presentations are released, we offer a discount code but you must be subscribed to Energy Times to receive it – in the left column of this website is a sign up form. To see if you missed any coupon code, check the last couple Energy Times in the archives here: https://archive.aweber.com/energytimes
Have you ever seen helium, argon, neon and other gases emit colors that are not associated with those colors? We already know the answer is no, but we’re going to show you various demonstrations that we can accomplish just that when exciting various tubes with the Tesla Resonant Transformer in the Cosmic Induction Generator mode. What kind of physics are we bending or defeating or making obsolete? What does that say for the predicted gases some stars are supposed to have by looking at the colors being emitted – maybe some electrical phenomena exists that are fooling our scientists? We already know the red shift model is false and the premise for the big bang theory is nonsense as Einstein’s Relativity is, but now this? We’re only proposing possibilities, but it is irrefutable that we can change the emitted spectrum of multiple gases when we subject it to our Counterspace node and you’re free to make up your own mind as to what is happening or what it means.
The picture at the top of this post is a demonstration of exactly that. It is “supposed to be” pinkish/purple. Interesting things happen when you place something at a point where it leads into the other dimension, literally, that is what we’re doing.
It’s important to understand, especially if you’re a Tesla enthusiast, that the primary and secondary coils should be avoided at all costs and although Tesla taught this, nobody appears to be putting this into practice and certainly not like what you’re seeing in this presentation. There are primary coils, secondary coils and then tertiary coils, which are the 3rd or “extra coils” and we’re only using the extra coils because that is what is doing all the work anyway. The full embodiment of our extra coils looks like a primary and secondary attached to each other but they’re not. The thick wire coil is where the current resides and the skinny wire coils is where the voltage potential resides and together, they are ONE coil.
You’ll also learn how to calculate the bandwidth and magnification factor for your Tesla coils and although some of this has been shared in some of the blog posts with videos on emediapress.com, this presentation gives you Eric’s full notes on the subject for all the calculations necessary for you to not only understand what we’re doing, but to replicate it as well. We’re only scratching the surface with what we can do with all of this!
If that is too technical for you, enjoy the demonstration part of the video and I’ve included 2 other videos that add an hour to the demonstrations, which were recorded both before AND after the conference. The first free bonus video shows the super amazing, Cosmic Induction Generator effect on a plasma tube from John Bedini’s private collection – a plasma show unlike anyone has ever seen – along with a few extra demonstrations that we recorded after the conference when Griffin Brock brought some bulbs from his collection to the shop including a few he made himself.
This is by far one of the most interesting demonstrations with some of the most important knowledge about Tesla’s Resonant Transformers and we even have a good time introducing the subject with some ideas and thoughts about what lies on the other side since that IS indeed what we are tapping into with the Cosmic Induction Generator. Have fun and enjoy your journey with us to the Outer Limits! 🙂
Here is a demo with the lights out so you can see the flame speaker better. This piece of music is used so often because the pitch, etc. works well with the flame speaker. I’ll post more vids of some other audio soon.
Also, get your tickets to the 10th Annual Energy Science & Technology Conference where we will be demonstrating this and more 🙂 – Learn more about the Energy Conference here: https://energyscienceconference.com
Nick Kraakman who has been collaborating with Peter Lindemann behind the scenes is bringing an Adam’s Motor to the 2021 ESTC. Nick will be showing some never before seen pictures of some of Dr. Robert Adams machines that were sent to Peter Lindemann years ago. Peter corresponded with Dr. Adams for years and has compiled more booklets, pictures and letters from Dr. Adams regarding the Adams Motor than anyone that we know of. This information and pictures will all be available in digital downloadable format after the conference.
There are very specific features about the circuit and coils that are no immediately apparent, which give advantages to it’s efficiency and coefficient of performance (COP). This will all be explained at the conference.
Also, get your tickets to the 10th Annual Energy Science & Technology Conference where we will be demonstrating this and more 🙂 – Learn more about the Energy Conference here: https://energyscienceconference.com
We’re measure the inductance with a B & K meter, conducting some wireless light tests and more. There are TWO videos below, make sure to watch them both.
Get your ticket to the 10th Annual Energy Science & Technology Conference where this will be demonstrated: https://energyscienceconference.com
Donate to EPD Laboratories, Inc. 501(c)3 non profit to support the work of Eric Dollard https://ericpdollard.com
