Category: Energy News

Clean energy stories from around the world.

Posted on by — 8 Comments

EM Space Drive Apparently Violates Newton’s 3rd Law

Isaac Newton
Isaac Newton

Conventional physics is in alignment with Newton’s 3rd Law of Motion where every action is supposed to have an equal and opposite reaction. However, that is a misunderstanding of natural phenomena because the reality is that the combined forces are divided between two reference points and that is a huge difference in the interpretation of nature. However that may be, this still does not permit a propulsion system with no reaction at all.

An important distinction is that there actually are mechanical systems, which take a reaction but turn it around to help push the machine/device/system in the forward direction. That means that the reaction is not opposing anything and is actually used to become additive to the original forward motion that created it to begin with. That means more forward work is accomplished compared to the work that was input and this violates no laws of physics contrary to conventional belief. Take note that there still is a reaction, but it does not buck the forward intended motion.

Veljko 2-Stage Mechanical Oscillator
Veljko 2-Stage Mechanical Oscillator

Examples of these include Veljko’s 2 Stage Mechanical Oscillator, Fernando Sixto Ramos Solano’s Force Multiplier System, William F. Skinner’s 1939 Gravity Power Machine and others. These systems have many things in common, which include the fact that there is a reaction in the system that is cleverly manipulated into doing forward work for the system. No laws of physics are violated and it has nothing to do with perpetual motion.

Now, lets get to systems that have no apparent reaction whatsoever. We’re not talking about using reactive power to do forward work, we’re taking about a system that appears to have no reaction at all.

Recently in the news, a new space propulsion drive is being admitted by NASA to have no reaction and it is ruffling some feather. An astrophysicist told Space.com, “The reason it’s controversial is, it violates Newton’s Third Law.”

EmDrive
EmDrive

The concept was invented by Roger Shawyer who calls it an EmDrive. Microwaves are bounced around inside a conical shaped container and without any propellant, a small amount of thrust is created. This has been verified by researchers at NASA’s Johnson Space Center in Houston.

The thrust produced is extremely small but nevertheless, it works and of course needs to be researched and developed further. It is always a good sign when we see conventionally trained academics and engineers admitting that something is doing the “impossible” and is apparently violating the coveted laws of physics.

You can read more about this here: http://www.space.com/29363-impossible-em-drive-space-engine-nasa.html

The paper by NASA on this project is here: http://ntrs.nasa.gov/search.jsp?R=20140006052 – a link to the PDF is on this page.

It seems that the conical shape is causing a simple potential difference between the narrow and wide end giving it somewhat of an asymmetrical dipole effect that appears to be related to a century old discovery.

A reaction-less space drive has was invented and proven out in the 1920s – almost 100 years ago!

Thomas Townsend Brown developed an interesting propulsion system using capacitors charged to a high voltage. When charged up, the capacitor moves through space in the direction of the positive terminal. Here is a short excerpt from his British Patent #300,311, A Method of & an Apparatus or Machine for Producing Force or Motion:

“The invention also relates to machines or apparatus requiring electrical energy that control or influence the gravitational field or the energy of gravitation; also to machines or apparatus requiring electrical energy that exhibit a linear force or motion which is believed to be independent of all frames of reference save that which is at rest relative to the universe taken as a whole, and said linear force or motion is furthermore believed to have no equal and opposite reaction that can be observed by any method commonly known and accepted by the physical science to date. ”

This reaction-less propulsion system from he 1920s is not just theoretical, it demonstrates what is known as the Biefeld-Brown Effect, which is the basis for a field known as “Electrogravitics.”

Ten years ago when I first wrote The Quantum Key, my layman’s Aetheric Unified Model predicted the proper direction of movement in this manner without having ever heard of the Bifeld-Brown Effect. Basically, the positive charge of the aetheric source potential is repelled by the high voltage positive at the leading edge of the “craft” and this causes it to be deflected over the shell towards the negative end. Simultaneously, the implied anti or negative charge of the aether pulls on the positive end of the craft and causes it to move along at a negative resistance and this seems to be the obvious reason for no reaction – there simply is no positive resistance it is moving in to. Since the positive aetheric source charge is what causes inertia by imparting an electrostatic repulsion against the protons that make up the mass, inertia is reduced since that which causes it is no longer moving through the atomic matrix of the mass that makes up the craft – it is deflected over it. This appears to be the main principle at play in any asymmetrical thruster that has no reaction.

Anyway, the mainstream sources of information are really mainstream sources of disinformation because it is constantly claimed that the effect is nothing more than ion wind and that the movement is ion propulsion, but it is not. There is a small bit of ion wind, but not even close to being enough to account for the amount of lift or thrust given to an apparatus utilizing the Biefeld-Brown Effect.

The most common is known as a “Lifter” and you can see a very basic one in operation here:

Here is a PDF of a report from the U.S. Army Laboratory stating, “The calculations indicate that ionic wind is at least three orders of magnitude too small to explain the magnitude of the observed force on the capacitor.” Force on an Asymmetric Capacitor

Posted on by — Leave a comment

Longitudinal Light Wave?

An interesting new development allows light to be directed in a unique way.

Using a gold-plated silicon array, light can be made to move at 90 degrees from where it came from and the strange thing is that the light moves in a STRAIGHT LINE instead of in a sinusoidal pattern. That prevents interference between two different phases of light.

This is not a claim that the light is transmitting in some sort of longitudinal way, but it sure sounds like it – especially when it was reported that there was no time delay between the transmission of light from one point to the other. Longitudinal transmission would mean that energy is not lost at 90 degrees from the direction that the light is moving as opposed to a transverse “sinusoidal pattern”.

Another interesting thing is that the original article posted by PBS did state that the light was transmitted instantaneously to the other side instantaneously. Shortly thereafter, they were asked to correct the article so that the laws of physics were not violated.

“A previous version of this article mistakenly reported that light hitting the chip was transmitted to the other side instantaneously. That would violate the laws of physics, of course. We regret the error.”

Go here for the full article: http://www.pbs.org/wgbh/nova/next/tech/new-gold-plated-silicon-array-can-control-light/

 

Posted on by — 2 Comments

Evaporative Refrigerator

Evaporative Refrigerator

A group of students from the University of Calgary have developed a simple evaporative refrigerator. It was inspired by the way that animals and insects keep themselves cool.

Warm air from the surroundings is funneled into a pipe network to evaporate water moisture, which carries heat away from the air. Once the air is cooled, it moves into the chamber where the food is kept. The only power requirement to bring the temperature down to 4C is to power a small fan to move this cool air, which can be done with a very small battery setup powered by a small solar panel.  The refrigerator still works with no electricity but works best with the fan.

To learn more, go here: http://challenge.biomimicry.org/en/custom/gallery/view/2576

Posted on by — Leave a comment

Iron-Gallium Magnetoelastic Energy Source

20 years ago, the Navy created a magnetoelastic material that produced efficient electricity. When this material, Galfenol, is physically impacted, it produces a magnetic fields.

Galfenol can produce up to 80 megawatts of power per cubic meter under strong impacts! Not only does this material produce a magnetic field when hit, a magnetic field applied to the material will cause it to change shape – so it works both ways – and at a 70% conversion efficiency.

One of the first things that comes to mind is to possibly use the Galfenol in conjunction with Nitinol – the metal that changes shape with heat. Our Energy Times newsletter has an entire article on Nitinol with some recommended links.

Maybe we have the materials necessary for a perpetual motion machine? Perhaps Galfenol can create electricity that heats a resistor that causes the Nitinol to bend. That bending could in turn impact the Galfenol to create the magnetic field. At that point, the Nitinol cools and goes back to the original shape. The magnetic field can cause electricity to produce heat to warm the Nitinol causing it to bend and repeat the process.

This is obviously not a completely serious suggestion but is food for thought since it seems all the necessary attributes to do something like this is sitting right there in these materials.

You can read the whole article here on the Iron-Gallium material: http://phys.org/news/2015-09-iron-gallium-alloy-power-generation-device.html

Posted on by — Leave a comment

Tesla Media Network

Coming to a TV near you!

Posted on by — 3 Comments

Electrical charge is more than the electrons

It is known by those who are skilled in the art of some overunity electrical devices that there is more going on with the electrical current than the typical electron flow theory can account for.

For years, John Bedini has said that current meters that measure electron current only measure what is wasted. Eric Dollard has said that energy is the rate that electricity is being destroyed, which is the same thing since that current multiplied by voltage over time is energy, the destruction of organized potential, and that is what the meters are measuring.

In Jim Murray’s SERPS device, which has demonstrated almost 50 times more work being done than the net draw from the power supply, Jim has said that there is extra energy in the current. However, most conventionally trained engineers simply cannot comprehend how this can be.

For example, if we have an incandescent light bulb in an electrical circuit and we supply electricity to this load, the bulb will light up. However, a common idea is that the bulb is “burning up” all the electricity that passes through it, but nothing could be further from the truth.

In the SERPS for example, electricity is passed through a resistive load and then a capacitor is charged on the other side of the load. Then, at the right time, the capacitor is discharged backwards through the load back to the source (generator) turning it into a motor for that moment. So, if the generator is only a generator for 1/2 the time and is a motor 1/2 the time, the motor or prime mover moving the generator to begin with sees virtually no net load.

That demonstration alone is proof that there are some other properties to electrical current than what can be accounted for by simple electron current theory alone. There is something extra and the so-called electron current, which is measurable by common current meters cannot explain or account for it all – just as Bedini and Dollard has hinted.

A couple years ago, a very important announcement was made during research into “cuprate superconductors”, which contain copper, which revealed that, “electrons are not enough to carry the current. ” Discussion on this “violation” appears to go back to the 1990’s when searching online references.

Although these discussions focus on a very specific sets of conditions required to elicit such violations of common electron current theory, the implications are staggering when reading between the lines.

Whether superconductors are used or not, the fact is that there is more current being carried than can be accounted for by the electrons. So, what else is carrying the current? And does this actually give more credibility to some overunity claims where the end results are more than what can be accounted by measuring the output electrically?

For example, in the Bedini SG, if one were to measure the electrical output of a the machine, it is always less than what actually winds up in the battery. Stating it another way, there is more that winds up in the battery than can be measured leaving the circuit charging it. There are some interesting things that are happening in the battery, which allow the battery to start receiving free source potential from it’s environment, which doesn’t come from the electrical circuit – it’s related but not directly proportional.

Now, this understanding that shows that there is more to the current than the electrons can account for suggest other means for transferring potential to the battery, which probably can’t be measured by the meters. It is understood that there absolutely is more that winds up in the battery than can be measured leaving the circuit, which is indisputable and anything like this that  can contribute to a clearer understanding of these kinds of observations is more than welcome.

In the article from a few years ago, Electrons are not enough: Cuprate superconductors defy convention, The below diagram shows that there is more electrical charge than can be accounted for by electrons alone.

“Luttinger’s theorem states that the number of electrons in a material is the same as the number of electrons in all of its atoms added together.”

“The researchers developed a model outlining the breakdown of Luttinger’s theorem that is applicable to cuprate superconductors, since the hypotheses that the theorem is built on are violated at certain energies in these materials. The group tested it and indeed found discrepancies between the measured charge and the number of mobile electrons in cuprate superconductors, defying Luttinger.”

“…Something other than electrons carries the current.”

“Electrons are charged. Therefore, if an electron does not contribute to the charge count, then there is a lot of explaining to do.”

They even state, “Now the researchers are exploring possible candidates for current-carriers, particularly a novel kind of excitation called unparticles.”

Although the defiance of Luttinger’s Theorem is is not at astronomical proportions in this example, a deviation from the predicted amount is still a deviation. Something either follows the “rules” or it doesn’t.

The admission that there might be something other that carries the current is actually quite bold and could potentially rattle the cages of the classical electron flow theory. This isn’t a surprise for those involved in research into overunity systems, but it is a surprise to see conventional references admitting such a thing.

Here is the full article: http://phys.org/news/2013-03-electrons-cuprate-superconductors-defy-convention.html

And here is the original paper: http://link.aps.org/accepted/10.1103/PhysRevLett.110.090403

Posted on by — Leave a comment

Free Energy Flashlight

FREE ENERGY FLASHLIGHT

Imagine having a free energy flashlight that never has to have its power source replaced, you don’t have to plug it in, put it in the sun, crank a handle or shake it up… because it charges itself up. What if you were able to use it for a few hours, set it down and the next day, it is charged back up again?

Obviously, this would have serious implications not just for flashlights, but mobile phones and any other small devices that are normally powered by some small batteries.

In this case, it actually exists according to a company based out of Australia and they’re selling these free energy flashlights right now. We want to bring it to your attention.

The company claims their Free Energy Flashlight is powered by the Earth’s magnetic field and other electromagnetic waves aka electronic smog that is all around us. It’s not far fetched and a lot of big companies are taking this concept serious.

For a century, crystal radios are powered by the radio waves that they’re tuned to listen to. When you hear the radio station in the ear piece, it’s powered by free energy that you don’t have to pay for – it comes from the radio station.

RFIDs are also powered like this and some are even claiming to have developed it to a point, which it can charge a AA battery in a day. That might not seem like a lot, but what if you had that technology in every wall clock, mouse or wireless keyboard, remote controls, you name it… the batteries would never die and you would never have to replace them.

Dennis Siegel claims to have developed a circuit that will harvest enough to charge a AA battery like this. It appears to be nothing more than electromagnetic induction into a coil from the fields produced from electrical appliances, etc. But there are also models he developed that can harvest the same using much higher frequencies coming from radio, cell phone towers, etc… Read more about this here: http://www.extremetech.com/extreme/148247-german-student-creates-electromagnetic-harvester-that-gathers-free-electricity-from-thin-air

Even large corporations like Nokia have already announced that they’re looking to do the same thing in order to have a phone keep itself charge up. It’s been a while and we haven’t heard much more about it. They say it’s only outputting an amount of electricity that is too small so perhaps they haven’t exceeded the levels needed to accomplish the goal of keeping a phone charged up. Or, maybe its just too disruptive to pull hundreds of millions or billions of phones around the world eventually off the grid and have them all charged at the expense of the power company or home/business owners – seeing that the article came out 6 years ago, why would a company like Nokia with all its resources not be able to produce something like this? Even if it wasn’t built into the phone, they could build it into a phone case. If someone never had to plug it in, I’m sure they’d sell more than a few! Read about Nokia’s announcement on this here: http://www.technologyreview.com/news/413744/wireless-power-harvesting-for-cell-phones/

Free Energy Flashlight
Free Energy Flashlight

The company that actually has built a Free Energy Flashlight is Adgex. Here’s what they say, “…the use of the ‘Adgex Accumlator’ ELFE taps into the earth’s energy supplies and converts that power into usable energy. Yes, the Earth provides the energy to charge the light, it’s that simple, and that incredible.”

You can use it for a few hours then set it down and the next day it will be charged back up!

You can get one: Free Energy Flashlight

If you want to join in on the discussion to look into it more, go here: http://www.energeticforum.com/renewable-energy/20247-worlds-first-real-free-energy-flashlight-no-shaking-no-batteries-no-solar.html

 

Posted on by — 4 Comments

2015 Energy Science & Technology Conference Panel Discussion

This is a panel discussion of 7 speakers at the 2015 Energy Science & Technology Conference.  Speakers in this video, which is moderated by Jeane Manning, author of Breakthrough Power include (from left to right): Eric Dollard, Al Throckmorton, Graham Gunderson, Jeane Manning, Aaron Murakami, Jim Murray, Paul Babcock, William Lyne, Douglas Lindstrom.

Posted on by — 6 Comments

2015 Energy Conference Presentation Summaries & Release Dates

We’ve been extremely busy since before the conference, during the conference and are still running non-stop since it was over. The conference presentation videos are all edited and will be made available about one every 5-7 days or so.

These presentations are listed in the order that they were given at the 2015 Energy Science & Technology Conference.

Dr. Douglas Lindstrom spoke on the ECE Unified Field Theory – and amazingly, much was quite understandable to the layman. He did cover some mathematics but also covered many concepts involving overunity processes in cold fusion and even parametric oscillators, which are going to become more and more popular in this field. There are references to some of the parametric work and some has been replicated and verified. His presentation will also include a PDF of the powerpoint with all the notes. Dr. Lindstrom works with Dr. Myron Evans – Tom Bearden considers him the most important physicist alive.

Al Throckmorton‘s presentation was very inspirational. This was a very rare appearance. Half of his presentation was really his story about who is he and much of his life experience, which was filled with priceless nuggets of wisdom. He had his special water gas pump, which is detonated with the plasma ignition circuit. We couldn’t pump water with it since we were in doors, but he did fill up the chamber and detonated the gas and the pressure gauge was over 200 psi, which is way more than enough to pump a very substantial amount of water. We’ll be including some diagrams and schematics for the pump so others see exactly what it is. The first application will be for small village use in Africa to pump water over long distances to improve the quality of their lives, which much of it is spent simply carrying water miles and miles from a remove water well.

Aaron Murakami (I) presented on the plasma ignition. Last year I spoke about the theory, operation, etc… with some demos. This year’s talk was to specifically show how I overcame the issue of wasted spark ignition systems and how to put the plasma ignition on these ignitions, which are so common these days.

Paul Babcock presented on Ethanol, debunked a lot of the anti-ethanol propaganda that is so popular and showed some of the designs that he and his brother have developed, which make small scale ethanol production a breeze. Ethanol is freedom and you’ll really learn why in this presentation. Ethanol is as good as cash or even better if you have a smart game plan and in these financially troublesome times, this information is priceless.

John Bedini showed his self-running motor – it was the first thing he showed me 16 years ago when we first met. It is really 3 machines in one and operates on one set of old 25+ year D cell alkaline batteries that are corroded, the springs in the battery holder are rusted out and the batteries are just taped in there. He spins the rotor and it starts off slow, turns a rotor with a propeller and blinks LEDs to show what phase the motor is in. By the end of John’s talk, it is about 25-50% faster than it was in the beginning – not because it took that long to get to full speed but because it recharged its own running battery over the course of the presentation.

Graham Gunderson showed a simple transformer setup and demonstrated that it not only makes up its own losses, but actually produces a bit more. The overunity is small, but it is something he wanted to share with everyone because if you can’t get to unity, you’re not going to get to overunity. Since there is an obvious lack of enough replications of several overunity devices that many people are attempting, taking baby steps with this very simple transformer concept is absolutely necessary. Any builder with basic technical skills can make this transformer and by following Graham’s instructions and references, they can achieve the same results.

William Lyne gave a fascinating comparison between some of the propulsion ideas of Tesla and J.J. Thomson. Eric Dollard was the one that actually suggested this topic since there are many gems inside of Occult Ether Physics by William Lyne. J.J. Thomson is one of the most important scientists to understanding not just the electrical sciences, but the real physics of the aether.

Paul Babcock‘s second presentation was on Magnetic Energy Secrets part 3 where he makes it VERY simple to understand what is necessary to create an overunity motor. He breaks it down to 3 very simple principles that almost anyone can understand. Paul covers multiple machines that have overunity results and shows how they are all adhering to these concepts. Back EMF is the bane of overunity and he shares the principles necessary to create a motor that does not generate – meaning there is simply no back emf!

Jim Murray presentation is crucial to the successful replication of his Dynaflux Alternator. Many who have tried to replicate it have failed. He shared the most important secret to understand to making it work as well as disclosing for the first time ever several pieces of information that were never disclosed in the patent. The patent has been expired for a long time now so it is public domain and he wants everyone to be able to understand what it is really about. The COP is over 2.5 on his laboratory bench model, which means it produces over 250% more electricity than it takes to run it.

Jeane Manning moderated this year’s Panel Discussion, which included Eric Dollard, Al Throckmorton, Graham Gunderson, myself (Aaron), Jim Murray, Paul Babcock, William Lyne and Douglas Lindstrom. We discuss some common threads between different valid overunity technologies, the creative process and its importance, Graham and Eric discuss Tesla’s patent which utilizes Cosmic Rays to charge capacitors to power loads and Eric gives some very clear specifics on this as he has replicated this in the past. There are multiple discussions about splitting water without electrolysis using electrostatics to rip the water apart without running current through it. Al Throckmorton’s water fuel cell for the pump that he demonstrated does not use electrolysis to split the water, it is a water capacitor and it works incredibly well. I share one patent on this kind of process that I tried to duplicate in the past and Eric Dollard discusses his friend’s work in this area who successfully mastered the electrostatic separation of water. Before we started the Panel Discussion, we gave recognition to the four Electrical Engineering students and two musicians who won the contests to have their conference and lodging costs covered by an Anonymous Donor.

Veljko Milkovic was not at the conference but his team was kind enough to provide us with a video compilation of quite a bit of his work. We played some of this during some of the breaks but did not have time to show the whole thing. Veljko Milkovic is the inventor of the popular 2-Stage Mechanical Oscillator, which produces many times more mechanical work that it takes to run the machine. This will be posted on YouTube at some point so everyone can watch it and learn more about his work.

Stephen P. McGreevy gave a very interesting talk on natural VLF radio recording. The Earth and atmosphere is constantly creating all kinds of music and other sounds, which are not audible to the human ear. Animals hear these sounds building up before an earthquake and that is how they know an earthquake is about to strike so they flee the area. Even if there is no natural disaster coming, these sounds are constantly around us. Stephen shows us many of the places where he traveled to record these sounds, he demonstrates the difference between the sounds and how different places sound different, various antenna methods to pick them up the best and anyone can get the receivers through his website so you can experience this as well. This is a fun and simple way, especially for children, to get in touch with the world around them. There are also schematics to build your own receiver that are open sourced on his site. This talk is highly related to Eric Dollard’s Advanced Seismic Warning System.

John Polakowski did not make it to the conference so to replace his presentation, Graham Gundreson gave a one hour presentation and John Bedini followed up with a one hour presentation.

Graham Gunderson went into a lot of detail on his experience with Floyd Sweet’s VTA (Vacuum Triode Amplifier) technology. Graham, John Bedini and one other individual has more experience experimenting with the VTA than probably everyone else combined. Graham spent 10-15 years on this nearly full time. The VTA used special barium ferrite magnets and the information that Graham shared about their special properties is rarely known by anyone in the “free energy” community. He discusses how they can be programmed to oscillate at very specific frequencies. Many of the REAL principles involved with the VTA are shared and Graham also shares about someone’s work who replicated the VTA type concept using some Bedini SG circuits and barium ferrite magnets to charge the batteries in his electric car. This presentation is priceless and is a must have for anyone that ever wanted to know what the VTA was really about. You’ll also learn quite a bit about permanent magnets in general that is not widely known.

John Bedini surprisied us again by demonstrating his Gravity Tuner circuit that measures activity in our spacial environment as well as demonstrating his famous Kromrey G-Field Generator. This was a shocking demonstration for most everyone at the conference because as it ran, the magnets turned cold instead of hot and when he lit bulbs with the output, it sped up. Also, shorting the output made the G-Field generator speed up and it demonstrated the pure white sparks, which are a phenomena of true negative energy circuits.

Eric P. Dollard finished the conference with a presentation that lasted almost 4 hours. If anyone can take multiple seemingly unrelated topics and tie them together with such mastery, it is Eric Dollard. He goes into the fact that J.J. Thompson is the key person when it comes to understanding the real aether physics, morphic fields and golden ratio archetypes all around us, concepts of levitation and musical harmonics and how the waveforms can tie together to give huge impulses that can catapult physical objects, science based on natural principles and how modern times has entered a new dark age with the current models that only serve to maintain ignorance about such principles and what direction we need to go to move back in the right direction. Eric goes into depth about Pythagorean mathematics and how it is key to understanding the natural science that is hidden in this day and age as well as much in depth discussion on various musical scales using the real Pythagorean ratios, which were accompanied with a few audio samples that were put together by Seattle Music Composer Charles Roland Berry. This allowed everyone to hear the difference between the ancient musical scales and today’s common scales. Eric even covers a fair amount about Gustav LeBon and covers many comparisons showing the mirror images between some of the music of Bach and polyphase power systems with many examples using his Versor Algebra diagrams. Needless to say, anyone that does not understand the relationship between music and electricity after watching this presentation has not been paying attention. In the end, Eric summarizes this presentation with an in depth discussion of the physics of the aether based on the work of J. J. Thomson including the mathematical equations of the aether that nobody else has been able to figure out because J. J. Thomson convoluted so much of it in his own writings because he never kept a continuity between different mathematical variables so it has always been confusing. If anyone can straighten out this mess, it is Eric Dollard and that is exactly what he has done so for the first time ever, you will be able to see as clearly as possible based on what is in J. J. Thomson’s work what he was really after. This presentation is THE definitive lecture on J. J. Thomson and the true physics of the aether.

That is a total of 15 videos from the 2015 Energy Science & Technology Conference. Vejlko Milkovic’s is not an actual conference presentation and that will be offered for free on YouTube later. Both of John Bedini’s presentations will be offered at some point through Energetic Productions and the other 12 videos will be offered by us through A & P Electronic Media.

The release schedule so far is as follows with the rest of the schedule coming soon:

August 3, Monday – Paul Babcock, Magnetic Energy Secrets Part 3

August 9, Sunday – Jim Murray, The Dynaflux Concept & Lenz’s Law

August 15, Saturday – Eric Dollard, The Power of the Aether as Related to Music and Electricity

August 18, Tuesday – Jeane Manning, Panel Discussion – FREE VIDEO

August 19, Wednesday – Eric Dollard, Versor Algebra Volume 2 – Special Theories of Sequence Operators as Applied to Power Engineering
This is not a conference presentation – it is the second release of Eric Dollard’s Versor Algebra book series.

August 25, Tuesday – Aaron Murakami, Plasma Ignition For Wasted Spark Ignition Engines

August 30, Sunday – Al Throckmorton, The Lord’s Pump Project (HHO Water Pump)

September 4, Friday – Graham Gunderson, BOTH of Graham’s presentations will be released simultaneously on the simple overunity transformer and on the VTA.

September 9, Wednesday – Douglas Lindstrom, ECE Unified Field Theory

September 14, Monday – Stephen P. McGreevy, On the Art of Natural VLF Radio Field Recording

September 19, Saturday, William Lyne, On the Parallel Propulsion Researches of Tesla and J. J. Thomson

September 24, Thursday, Paul Babcock, Ethanol is Freedom

Sincerely,
A & P

Posted on by — 4 Comments

Advanced Magnetics Beats Lenz’s Law

Paul Babcock goes over details on his over 1.0 COP motor that beats Lenz’s Law. Paul will go into greater detail on these principles at the upcoming 2015 Energy Science & Technology Conference.

Learn more here: http://energyscienceconference.com