Tesla Scientific - Discover The True Wireless
Cosmic Ether Exists Part 2 - Implications To Modern Physics by James DeMeo
Three Phase Distribution System Representation by Griffin Brock
Posted on Leave a comment

Eric Dollard’s New Paperback & Kindle Book Releases Today 2021-05-05

The Electrical Utility in the Digital Age & Revival of the Science of Electricity in the Digital Age by Eric Dollard

This new book is based on two reports written by Eric Dollard that was posted on his website for free. They are focusing on how the grid has degenerated in the digital age and how it has become susceptible to EMP attacks, which is a very real threat at this very time. This information is very important and should be considered vital to the security of the nation. A portion of the proceeds from this book go to EPD Laboratories, Inc., which is a 501(c)3 non profit corporation. It helps to support the work of Eric Dollard.

Presently, much discussion exists regarding the proliferation of harmonics in the electric utility system. Moreover, the susceptibility of this system to damage or destruction from a well-positioned nuclear E.M.P. is a subject of great concern. Such problems are not necessarily intrinsic to the process of electric transmission and distribution, but only present themselves when certain configurations exist within the electric utility system. Paramount in any transmission or distribution system is that such system must be a closed system, that is, the electromagnetic boundary condition must be maintained to the highest practical degree. This assures that the entry or exit of extraneous electric forces is minimized.

Get your copy here: The Electrical Utility in the Digital Age & The Revival of the Science of Electricity in the Digital Age

Presently, with regard to the electric utility system, the electromagnetic boundary condition is being violated in two ways: 1)By the ubiquitous employment of Wye to Wye connected transmission and distribution transformers, and related load configuration2)Through the extension of a common neutral connection throughout the entire electric utility system.

The widespread and enforced adoption of these practices has rendered the electric utility system an open system, or in other words, an antenna system, one of unprecedented proportions. The consequences must be obvious.It is the objective of the following series of engineering reports to re-establish a fundamental understanding of polyphase alternating current, and then apply this understanding to the analysis of the situation as it exists today with regard to the electric utility system.

The Electrical Utility in the Digital Age & Revival of the Science of Electricity in the Digital Age by Eric Dollard
The Electrical Utility in the Digital Age & Revival of the Science of Electricity in the Digital Age by Eric Dollard
The Electrical Utility in the Digital Age & Revival of the Science of Electricity in the Digital Age by Eric Dollard
The Electrical Utility in the Digital Age & Revival of the Science of Electricity in the Digital Age by Eric Dollard

In this Digital Age, the theoretical basis provided for Electrical Engineering has been defiled, reduced to an assemblage of delusive pronouncements enforced by a cabal of academic theoreticians. What gives authoritative force to their dictates is the overtly complex and convoluted mathematics which enshrouds them. This mathematics in turn becomes a “rite of passage” in teaching and replacing reason and experiment. Once the idols become digitized, they become law, and consequently electricity has become a lost science, relegated to the same scrap heap as alchemy.

However, in historical perspective, the theoretical basis for electrical engineering had achieved a very high level of development at the onset of the 20th century, this to meet the demands of a rapidly developing commercial enterprise, most notably that of the electro-magnetic telegraph and later electric light and power. Electrical science progressed remarkably well in this era, and thus became an exact science which engendered well thought out theories. The foundations of this science were derived from the Experimental Researches of Michael Faraday and their Mathematical Development by Clerk Maxwell. This became known as the “Faraday-Maxwell” Theory of Electricity.

Get your copy here: The Electrical Utility in the Digital Age & The Revival of the Science of Electricity in the Digital Age

Orgone Energy Experiments Part 2 - Proof Of A Cosmic Life-Energy by James DeMeo
3D Printable Flat Spiral Coils
Orgone Energy Experiments Part 2 - Proof Of A Cosmic Life-Energy by James DeMeo
Posted on Leave a comment

ERIC DOLLARD WILL DEMONSTRATE VIOLATION OF CONSERVATION OF ENERGY / DESTRUCTION OF ENERGY

Eric Dollard and Jeff Moe

Besides Eric’s personal presentation on Fortescue at the 2021 Energy Science and Technology Conference, which is all about his Versor Algebra mathematics and how it applies to the power grid, Eric and I will be presentation a few demonstrations with the equipment that we’ve been building.

Go here to get your tickets while you still can: 2021 Energy Conference

Watch this video to hear Eric describe a few of these demonstrations:

Violation of the Conservation of Energy / Destruction of Energy

Counterspace entry into a different “dimension”

Plasma flame speaker – plasma cymatics?

Golden ratio discharge on a Tesla Coil

How Primary & Secondary coils are unnecessary – Tesla described this but nobody listened

Go here to get your tickets while you still can: 2021 Energy Conference

Three Phase Distribution System Representation by Griffin Brock
Electrodynamic Seismic Forecasting – A Simplified Approach by Griffin Brock
Electrodynamic Seismic Forecasting – A Simplified Approach by Griffin Brock
Posted on Leave a comment

Cosmic Induction Generator Update with Eric Dollard – Jan-Feb 2021

Cosmic Induction Generator

This is an update from January here at the shop in Spokane with Eric Dollard. We’re working non-stop on this project with the hopes of being able to demonstrate this at the 2021 ESTC – seating is limited, get your tickets here: https://energyscienceconference.com

At this point now, we’re actually 99% done with the audio rack and are making rapid progress on the RF rack, which we will show you very soon. Below are THREE videos that I had time to edit and make avail – there are quite a few pictures and videos that I’ll post in the near future showing more of the progress that we’ve made.

Video #1 below is from January 21, 2021 and is a general update video:

Video #2 below is from January 30, 2021 and is a short video of the old HP Scope that Eric rejuvenated back to life.

Video #3 below is from January 31 and February 2, 2021 and shows the 1940s Collins Transmitter, which sat out in the Arizona desert getting rained on, etc. and it is now in working condition. There are some general updates in addition to some details on the Tesla Coils that the tuning unit will be feeding. Most of the coil project is already built and we’ll show pics/vids of that later.

Three Phase Distribution System Representation by Griffin Brock
Tesla Scientific - Discover The True Wireless
Electrodynamic Seismic Forecasting – A Simplified Approach by Griffin Brock
Posted on Leave a comment

2016 Top 10 Most Popular Blog Posts

2016 Top 10 Most Popular Blog Posts

Stan Meyer’s REAL Original Water Fuel Method
John Bedini – You will be missed!
Wind Power in less than 1 MPH
Primeval Code
13 Year Old Harvests Electricity from Air
Tesla’s Self-Acting Engine?
Cold Incandescent Light Bulbs?
A Water Bottle that Fills Itself
MIT Reverses Alzheimer’s with 40Hz Blinking Lights?
Lossless Electric Current

Share this list with the buttons below!

3D Printable Flat Spiral Coils
Orgone Energy Experiments Part 2 - Proof Of A Cosmic Life-Energy by James DeMeo
Tesla Scientific - Free Coil Design & Analysis Tools
Posted on Leave a comment

Crystal Radio Initiative Free Calculator

Tesla Scientific was founded by electrical experimenter and Tesla enthusiast Simon Davies in December 2012. Currently a one-man mission based on South Wales, UK, the goal is to make practical applications of Nikola Tesla’s most notable work and ideas primarily in the field of wireless transmission of electrical energy. The company has just officially launched with the Advanced Crystal Radio Initiative Calculator, lots of incredible info will be coming soon so stay tuned!

FYI – Simon Davies goes by dR-Green in Energetic Forum and is one of the most avid builders and replictors of Eric Dollard’s work – you can find a lot of his posts here: http://www.energeticforum.com/eric-dollard-official-forum/

For the Free Crystal Radio Initiative Calculator, visit Simon’s website here and be sure to spread the word to help support his efforts – he has openly shared a massive amount of his work and more people need to pay attention to what he has shared – http://www.teslascientific.com/

Orgone Energy Experiments Part 2 - Proof Of A Cosmic Life-Energy by James DeMeo
Orgone Energy Experiments Part 2 - Proof Of A Cosmic Life-Energy by James DeMeo
Electrodynamic Seismic Forecasting – A Simplified Approach by Griffin Brock
Posted on 6 Comments

13 Year Old Harvests Electricity from Air

Here is Max Loughan – a 13 year old who made an energy harvester to take radio waves and other energies from the air and turned it into electricity to power LEDs.

It is similar to crystal radio technology and harvesters are not new, but seeing that a very bright 13 year old is passionate about invention and what it could do for the world is worthy of praise!

We need to encourage more children to move in this direction. Awesome job Max and thumbs up to your Tesla T-shirt too!

Cosmic Ether Exists Part 2 - Implications To Modern Physics by James DeMeo
Cosmic Ether Exists Part 2 - Implications To Modern Physics by James DeMeo
Method Of Symmetrical Co-Ordinates Applied To The Solution Of Polyphase Networks by Eric Dollard
Posted on 1 Comment

Gravity Fed Water Generator

There are many kinds of water generators and most slow down the flow of the water. One company, Lucid Energy has inline generators that can be used to create electricity from water leaving water towers and other similar situations without any significant reduction in the water pressure!

Watch this presentation:

Learn more: http://www.lucidenergy.com/

Cosmic Ether Exists Part 2 - Implications To Modern Physics by James DeMeo
Bedini’s Gravity Wave Space Flux Motor - Disclosure And Demonstration by Peter Lindemann
Electromagnetic Induction And Its Propagation by Eric Dollard
Posted on 2 Comments

Cold Incandescent Light Bulbs?

Just when you thought incandescent bulbs were going out, they’ve been “reinvented” to be even more efficient than LEDs!

Normally Incandescent bulbs are about 5-10% efficient as most of the energy is converted to wasted heat and this age-old problem has finally been solved.

We’re literally talking about recycling light in a two step process.

The key is to create a two-stage process, the researchers report. The first stage involves a conventional heated metal filament, with all its attendant losses. But instead of allowing the waste heat to dissipate in the form of infrared radiation, secondary structures surrounding the filament capture this radiation and reflect it back to the filament to be re-absorbed and re-emitted as visible light. These structures, a form of photonic crystal, are made of Earth-abundant elements and can be made using conventional material-deposition technology.

That second step makes a dramatic difference in how efficiently the system converts electricity into light. One quantity that characterizes a lighting source is the so-called luminous efficiency, which takes into account the response of the human eye. Whereas the luminous efficiency of conventional incandescent lights is between 2 and 3 percent, that of fluorescents (including CFLs) is between 7 and 15 percent, and that of most commercial LEDs between 5 and 20 percent, the new two-stage incandescents could reach efficiencies as high as 40 percent, the team says.

The first proof-of-concept units made by the team do not yet reach that level, achieving about 6.6 percent efficiency. But even that preliminary result matches the efficiency of some of today’s CFLs and LEDs, they point out. And it is already a threefold improvement over the efficiency of today’s incandescents.

The team refers to their approach as “light recycling,” says Ilic, since their material takes in the unwanted, useless wavelengths of energy and converts them into the visible light wavelengths that are desired. “It recycles the energy that would otherwise be wasted,” says Soljačić.

The rest of the article available here: http://news.mit.edu/2016/nanophotonic-incandescent-light-bulbs-0111 mentions that the crystal is created with readily available natural ingredients so cost will probably not be an issue if they actually get these out to the public.

Bedini’s Gravity Wave Space Flux Motor - Disclosure And Demonstration by Peter Lindemann
Three Phase Distribution System Representation by Griffin Brock
Electrodynamic Seismic Forecasting – A Simplified Approach by Griffin Brock
Posted on Leave a comment

3D PRINTED MONOPOLE MOTORS

You may be familiar with 3D Printing and the fact that it truly is one of the most disruptive technologies to surface. It’s also becoming less expensive and more user friendly putting it in reach of more and more people. Some people are already using 3D Printers to create small monopole type motors and other parts for their energy projects and for the most part, many of these devices are actually based on one or more concepts that are protected by John Bedini’s monopole patents.

John Bedini’s 3D Printed Monopole

John Bedini has been researching and testing many different designs using 3D Printers as well as circuit designs that nobody else is working with for these small scale models and he is about to start sharing a lot of his work on these projects here: http://www.energyscienceforum.com/showthread.php?t=3073

John also mentioned that he is doing some work with crystal batteries that is not like anything he has done before and these will be running these small monopoles. Make sure to check out the discussion thread directly above to see what may be coming!

DaVinci All in One 3D Printer/Scanner

If you’re interested in 3D Printing but don’t know where to start, the DaVinci All In One printer/scanner is recommended because of it’s low cost and it’s relative ease of use. Go here to get the same 3D Printer that John Bedini is using for most of these projects: http://www.amazon.com/gp/product/B00OCG91IK/?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B00OCG91IK/

 

Orgone Energy Experiments Part 2 - Proof Of A Cosmic Life-Energy by James DeMeo
Cosmic Ether Exists Part 2 - Implications To Modern Physics by James DeMeo
Tesla Scientific - Discover The True Wireless
Posted on 4 Comments

2015 Energy Science & Technology Conference Panel Discussion

This is a panel discussion of 7 speakers at the 2015 Energy Science & Technology Conference.  Speakers in this video, which is moderated by Jeane Manning, author of Breakthrough Power include (from left to right): Eric Dollard, Al Throckmorton, Graham Gunderson, Jeane Manning, Aaron Murakami, Jim Murray, Paul Babcock, William Lyne, Douglas Lindstrom.

Orgone Energy Experiments Part 2 - Proof Of A Cosmic Life-Energy by James DeMeo
Cosmic Ether Exists Part 2 - Implications To Modern Physics by James DeMeo
Three Phase Distribution System Representation by Griffin Brock