Category: Free Energy

Posted on by — Leave a comment

Tewari Reactionless Generator (RLG) by Anupam Tewari

The Homopolar Generator has always been known to be able to deliver electricity without bogging down the prime mover and Faraday knew this 150 years ago!

Normal generators create a back-torque against the prime mover because of Lenz’s Law, which can be explained as an electromagnetic equal and opposite reaction, but this is completely circumvented in the Homopolar Generators.

Get your copy here: https://emediapress.com/shop/tewari-reactionless-generator/

Get 25% off for a limited time with this coupon code: RLG25

Bruce DePalma simplified and advanced this concept with his invention known as the N-Machine, which is a simple spinning permanent magnet or electromagnetic by tapping the shaft and the outer perimeter of the rotating magnet. Keep in mind this all works without any coils whatsoever! This is completely different from normal electromagnetic generators.

Later on Adam Trombly made improvements to Bruce DePalma’s methods and when he filed for a patent, the Pentagon served him with a gag order because they themselves apparently had been working on similar technology and many of you know the rest of the story. What they didn’t know was that the patent was also filed in Europe and somehow Paramahamsa Tewari who headed up India’s Nuclear Power Corporation (a really big deal in India) got his hands on the info.

Mr. Tewari worked on replicating Mr. Trombly’s work. So the story goes – Mr. Tewari measured how much water could be electrolyzed with a certain amount of electricity. However, when that same electricity powered the Tewari Reactionless Generator (RLG), the output electrolyzed water and he wound up with several times more freed up hydrogen. This defeated Faraday’s Law of Electrolysis by a few hundred percent and this led to more advancements and innovations on the RLG technology.

Over the years, Mr. Paramahamsa Tewari had continued working on his RLG machine and it has become one of the most tested free energy devices in the world showing at least 238% more electricity coming out of it than going in. This has been tested by very qualified individuals and organizations connected to various companies and universities and the goal is to get this out to the world to help solve the energy problem.

Unfortunately, Mr. Tewari passed away toward the end of 2017 but thankfully, his son Anupam Tewari is committed to keeping his father’s legacy alive and he was gracious enough to come to the 2018 Energy Science & Technology Conference to present on his father’s work.

This presentation serves as a perfect starting point for anyone who is not familiar with the Tewari RLG, where it comes from and the how Mr. Tewari’s Space Vortex Theory led him to the RLG. Even if you are familiar with the Tewari RLG, there is some history here that many are not aware of and this is coming straight from his son, Anupam, so is authoritative and historically correct.

Get your copy here: https://emediapress.com/shop/tewari-reactionless-generator/

Get 25% off for a limited time with this coupon code: RLG25

Posted on by — Leave a comment

Electro-Biohacking, Influencing Gene Expression with Dielectric Fields by Aaron Murakami

Electro-Biohacking by Aaron Murakami
Electro-Biohacking by Aaron Murakami

Electrocuture if over 270 years old and is the science of using high voltage to influence the growth of plants. Plants grow faster, stronger, need less nutrients, pesticides and other additives. Many of these methods are to simulate the Earth’s natural dielectric field that exists between the ground and the ionosphere.

Throughout almost three-hundred years of experiments, field trials, stringent academic research, etc. it has become indisputable that simply using electrostatic potential can drastically alter how plants grow.

Another benefit is that if only high voltage potential is used, current is not flowing so it does energy is not expended on the plant. The only energy loss is in the transformer’s magnetizing losses in order to create the high voltage field. It is a true free-energy technology because the increase in growth in the plants is way more than the energy expended to treat them.

In the last 1980’s and early 1990’s, a large pharmaceutical giant had some scientists on their team that were experimenting with high voltage fields on cells and no matter how the cells were deprived of light, oxygen, nutrients, etc. they continued to thrive as long as they were exposed to high voltage fields.

Get your hands on this powerful information now: https://emediapress.com/shop/electro-biohacking/

Get 25% off for a limited time with this coupon code: BIO25

That was the inspiration to move into other experiments where germinating seeds and fertilized fish eggs were treated and something very unexpected happened. Growth not only increased, but the gene expression changed!

When corn seeds were treated, they went on to grow corn that had 5-12 ears of corn per plant!

Electro-Biohacking

When fern spores were treated, they grew into a fern that had been extinct for over 1 MILLION YEARS! Top image is the normal fern you seen today. The one below that is what grew after the treatment and fossil evidence shows that the non-micro serrated fern leaves have not been in existence for over 1 Million years!

When wheat was treated, it grew “SUPERWHEAT” that was ready to harvests in 4 weeks rather than 6-7 months!!! The ears were smaller, but there were more per plant. That is about 650% FASTER than normal wheat and it is stronger, more nutrient rich, more disease and pest resistant, etc.

When trout eggs were treated, trout hatched that had “Salmon Hooks”, which had not been seen on this trout for over 150 years since they had been extinct! The one on the left is the normal trout of today. The one on the right is what hatched after eggs from the type on the left were treated. They grew “Salmon Hooks”, grew about 30% bigger, 30% faster, were more disease resistant, were stronger and more aggressive swimmers, etc.

The video excerpt below does not go into this amazing and unusual but highly beneficial effect, but is but a small sample of what is discussed in this presentation.

GMO (Genetically Modified Organisms) promises to feed the world, have more disease and pest resistant plants, more abundant harvests, etc. but the empirical evidence is that it is Pandora’s box where none of these benefits are realized long term and they are causing environmental and financial catastrophes all over the world. This is why so many countries are banning GMO seed crops because it isn’t speculation, it is fact that GMO plants are dangerous, cause cancer, among countless other negative effects.

High Voltage seed treatment simply supplies the potential for germinating seeds (or eggs) to access the dormant genetics that are ALREADY inside the DNA. Therefore, no genes are changed, the potential is there to simply access the genetic programming that nature itself has built into the plants.

The potential is for larger and faster harvests with higher quality food, less fertilizers and little to no herbicides or pesticides. And, for the fact that it takes almost no energy to accomplish these amazing benefits, we could very well be on our way to abundant food production for the entire world without crossing the danger zone that GMOs are known for.

Get your hands on this powerful information now: https://emediapress.com/shop/electro-biohacking/

Get 25% off for a limited time with this coupon code: BIO25

Posted on by — Leave a comment

The Meaning of Unity in Energy Conversion Systems by Jim Murray

The Meaning of Unity in Energy Conversion Systems by Jim Murray
The Meaning of Unity in Energy Conversion Systems by Jim Murray

Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea, was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.”

However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft. Therefore, it quickly became evident that not all of the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized.

What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts. Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.”

The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses.

During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.

Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well established science of corporate book-keeping.

Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact. Both efficiency concepts shall be fully explained in this presentation.

To get your copy now, go here: The Meaning of Unity in Energy Conversion Systems

Use this coupon to receive 25% off for a limited time: UNITY25

Posted on by — 1 Comment

2018 Energy Science & Technology Conference Panel Discussion 1

2018 ESTC Panel Discussion #1 with Anupam Tewari, Jeane Manning, Dr. Gerald Pollack, Aaron Murakami, Prof. Robert Haralick, Karen Elkins, Paul Babcock.

Posted on by — Leave a comment

Open System Thermodynamics by Peter Lindemann

Open System Thermodynamics

Get the whole presentation here: https://emediapress.com/shop/open-system-thermodynamics/

Since 1977, the entire field of thermodynamics was upgraded with Ilya Prigogine’s Nobel Prize winning work to include Open System Thermodynamics. In a nutshell, it means that any system that is open with the environment can output more work than the operator has to supply.

Take note that contrary to the conventionally trained academic who is always quick to point out that there can’t be more output than input is making a false argument because that is not what is actually claimed by the inventors of legitimate free energy technologies.

More output than what the operator has to supply is not the same thing as claiming more output than was is going into the system. Obviously, this means there is other input from elsewhere that is not provided by the operator of the system.

It is often said that Prigogine’s work extended thermodynamics to include open systems, but the reality is that it did not extend thermodynamics, it corrected it. The reason for this is very simple – there is no such thing as a closed system and every single system is open.

The deeper reality is that every system is open – some are designed to make use of external input that is separate from the operator’s input and some are designed to only use the operator’s input.

If you have a flashlight and the battery has 10 units of potential energy to light the bulb, when the flashlight is on, minus losses, there will only be 10 units of light or less depending on efficiency. Efficiency is the ratio if TOTAL input vs INTENDED output. This is what is meant by a closed system because it does not utilize free environmental input such as gravity, heat, light, wind, water, etc…

If you take this flashlight and stick it deep into a snow bank that is freezing, the battery will interact with this cold environmental temperature and it will not power the light as long. That is because it is not a closed system after all and easily interacts with the environment outside of itself. If it was a closed system, the battery would continue to power the light irrespective of the environmental temperature that the flashlight is operating in.

Let’s look at an example of a child flying a kite. If the child inputs 10 units of energy and the wind inputs 90 parts energy for a certain period of time, that is 100 parts of energy total input. If 70% of all that input is lost in bad kite design, wind friction on the kite, etc… that means that only 30 units of energy were actual kite flying work accomplished. 100 parts of energy were input and 30 units of INTENDED work were done – that equals 30% efficiency.

That means 30 units of intended work were accomplished but the child only had to input 10 units of work. That is a 300% net GAIN in energy compared to what the operator had to pay for. The ratio of OPERATOR input compared to INTENDED work done is COP or Coefficient of Performance. In this case, the COP is 3.0. COP does not include free environmental input and this is how every heat pump is rated for example.

The kite flying example is a perfectly legitimate free energy system where the operator of the system got way more out of the system than what he had to put in. Again, notice that this is NOT more output than input, but more output than the operator had to contribute – meaning there is indeed extra free environmental input from somewhere.

Watch this excerpt from Peter Lindemann’s Open System Thermodynamics presentation for deeper elaboration on this concept. The next time a skeptic tells you that there can’t be more output than input and that anything like that would violate the laws of thermodynamics, please point them to this post and video because the fact is that they are making an illegitimate argument about something that was never claimed by those who have real free energy technologies.

Please help spread this truth by using the share buttons below!

Aaron

Posted on by — 3 Comments

Joseph Newman – New Movie

Joseph Newman is one of the pioneers of the “free energy” movement. He is a controversial character that has pushed the free energy concept to mainstream more than most.

Some of my associates new him personally and have even replicated his work to various degrees and admit that his technology works. Last year, Jospeh Newman passed away from heart failure, but before that, fortunately, a full length movie about his life story was finished that details his introduction to free energy concepts, his fights and struggle and rise to fame and then the collapse at the end of his life.

NEWMAN is the name of the new movie and it is very well put together.

Film description: Joseph Newman, the legendary asocial backwoods inventor, happens onto a brilliant discovery that ends the need for oil, gas and nuclear dependency as we know it, but he spends most of his life fighting conspiracy and Washington DC for a patent.

Starring: Joseph Newman, Evan Soule, Ralph Hartwell
Runtime: 1 hour, 20 minutes

You can watch it right now on Amazon – here’s the link: NEWMAN

Posted on by — Leave a comment

Paul Babcock 9/12/2016 Live Call Recording

Here’s the recording of Paul Babcock’s live call from September 12th, 2016. There are some pictures in the video from the 2016 Energy Science & Technology Conference.

We hope you enjoy this and share it with your friends with the buttons below!

Posted on by — Leave a comment

Leak Project Interviews Paul Babcock

Paul Babcock was recently interviewed by the Leak Project.

Visit Paul Babcock’s new website: Paul Babcock

Paul Babcock’s DC Motor Disclosure presentation is here: Babcock DC External Field Interaction Motor

Posted on by — Leave a comment

NEW RELEASE – Plasma Impulse Motor by Aaron Murakami

Plasma Impulse Motor by Aaron Murakami
Plasma Impulse Motor by Aaron Murakami

Plasma Impulse Motor by Aaron Murakami, presents a novel way to power an inductor that appears to possibly have a reduced resistance/impedance effect in the entire circuit. This may prove out to show how to get a stronger magnetic punch on a coil thereby increasing its power so we can have stronger motors for the same or less electricity. It is also a 100% mirror image of the Gray Tube circuit, which is though by many to be THE Holy Grail of Free Energy since the output is astoundingly high compared to the input. If the inductor’s impedance is being reduced, even a little, this is a very important discovery in electromagnetic science. Release date – August 27, 2016. Learn more: Plasma Impulse Motor

Posted on by — Leave a comment

NEW RELEASE – From Nanobubbles to Ball Lightning by Moray B. King

From Nanobubbles to Ball Lightning by Moray B. King
From Nanobubbles to Ball Lightning by Moray B. King

From Nanobubbles to Ball Lightning by Moray B. King – In an internal combustion engine the big anomalous energy manifests from microscopic ball lightning – not hydrogen combustion. This presentation shows many resources and academic paper references that are involved with the latest research in this field. You will also learn how you may be able to make your own nanobubbles using various methods of cavitation to create what just may be microscopic ball lightning in your engine. Release date – August 18, 2016. Learn more: From Nanobubbles to Ball Lightning