With consistency, Mike Clarke has brought his Reactive Power Generator (RPG) to a higher and higher level each year. Yes, with Paul Babcock and his partner Norm’s help, it will keep itself charged up while producing net power over time!
It runs on a battery bank, is similar to an air core Bedini SG but with a more sophisticated circuit, and charges a battery bank while BOTH banks STAY CHARGED UP… Everyone wants to see a self-running system – well, here it is.
All the while… it is turning a generator that is doing net work by lighting a bulb or bulbs – the input battery bank not only seems to not care about the load, it’s like it doesn’t even know it is powering the prime mover!
Mike has presented on this a couple times already and this is the third time – each time gets better and better! The higher up in voltage he goes with the battery bank, the more efficient the system gets and he even shares one of the most crucial pieces of information – his battery swapping methodology – how he swaps the front and back batteries back and forth.
This motor has run countless hours on these battery banks and it has been many, many months since they’ve been charged up initially – it just keeps running and running and running and the batteries never drop! Get a copy of this presentation so you can see his latest results – wait until you see the scope charts of the batteries over time…they’re mind blowing.
If you saw Paul Babcock’s presentation on Zero Entropy States, you’ll now see how that is applied in practice to keep some battery banks apparently indefinitely charged up – all by the nature of the RPG itself. Also, once again, John Bedini has been right all along.
Years ago, John Bedini posted multiple references on his website in the late 90’s regarding a “Time Charge” when it came to charging capacitors from the School Girl energizers and discharging them to batteries. Hardly anyone ever took this comment seriously but Paul Babcock definite did and when we consider the depth of Paul’s experience, it is a lot more meaningful. When we look at energy, potential, potential energy (potential for energy to exist), then doesn’t the possibiliy of Time Potential exist as well? It does and it is the potential for TIME to exist at a later time as well so if we can charge batteries with Time Potential from the radiant energy spikes, interesting things happen in batteries, etc.
Paul has been working with Mike Clarke on his Reactive Power Generator for several years and this knowledge has been applied to allow it to run in a manner, which appears to be indefinite without killing the batteries. And, mechanical work is turning a generator producting power by lighting bulbs the entire time. Getting a battery to reverse it’s TIME is more literaly than one might think.
This presentation is the perfect companion to his presentation from 2019 called Aether Weirdness – It’s About Time! Magic Batteries And Other Observations, which is recommended as the perfect companion presentation.
This call is JAM-PACKED with a lot of info. Jim gives an overview of each and every presentation he gave at the Energy Science & Technology Conference. He also discusses his latest book, which has been released on Amazon – The Meaning of Unity in Energy Conversion Systems.
Then we open up for questions from the callers and there are quite a bit that cover a lot of areas of his work.
At the 2018 Energy Science & Technology, Jim Murray, a legend in the Tesla Sciences & Free Energy field presented on The Meaning of Unity in Energy Conversion Systems. This is one of the most important presentations given in this field simply for the fact that is explains an accurate accounting method so that the distinctions are made between system efficiency and conversion efficiency. The bottom line is that this shows how to properly compare the input to the output of a system, which is more complex than it initially appears.
Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.” However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft.
Therefore, it quickly became evident that not all the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized. What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts.
Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.”
The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses. During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.
Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well-established science of corporate book-keeping.
Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact.
Both efficiency concepts shall be fully explained in this book. Simply, this book serves as a definitive guide for those who wish to properly validate their input vs output claims. It also includes copies of one of the most significant and important patents in history in this field, The Dynaflux Alternator, which is Jim’s generator that has a reduced Lenz Law Effect meaning it has less drag than conventional science will admit is possible. There is also another related patent on Jim Murray’s Dynaflux Alternator, which gives a much wider picture. The Dyanflux was used as an example in the book so is not required to understand what it is about, but is valuable to know about.
Jack Hanlon, Ph.D. believes over unity electrical machines have been built and even demonstrated many times at the ETSC and other places; however, he has never heard a complete explanation of “how they work” that will stand up to the skepticism of a conventionally trained mathematician, physicist or engineer.
The explanations always seem to involve some “mysterious” source of power or slightly nebulous use of magnetism.
The missing piece is always: what is the source of the extra power?
Since we have been unable to answer this question in a satisfactory way, the technology is put in the realm of “voodoo” science, and it is not seriously considered by the larger traditional scientific community.
He believes this holds back the wide spread and rapid development of this important technology and limits the developers to a small community of experimenters.
Switched reluctance generators have always been a prime candidate for overunity results. Eric Dollard who is very skeptical about any “free energy” claims was originally brought into Borderlands years ago to verify a switched reluctance generator built by Peter Lindemann and Michael Knox. Accounting for a sufficient margin of error, Eric Dollard found that it did indeed produce more work than it took to run the machine!
This is probably the most comprehensive analysis on where the free energy is in such machines and it is done in a relatively simple and eloquent manner with simple algebra and geometry.
Attendees from 9 countries and from 48 out of 50 states helped make this year’s 8th Annual Energy Science & Technology Conference another magical experience. There were about 20 presentations from an amazing group of speakers including Dr. James DeMeo, Prof. Robert Haralick, Dr. Jack Hanlon, Eric Dollard and many others.
The presentations will be produced in digital downloads available through Clickbank like usual and this begins next week with the editing. We may start releasing them by the end of next week. The goal is to make 2-3 available per week until they’re all available.
Here are just a few pictures to give you a glimpse of what happened this weekend. There are a lot more to come including some slideshows.
Here are a few comments from some of the attendees:
“For all of what you have done. It was our first time and we will walk away with networking opportunities and a large amount of knowledge. Thanks to you and the great presenters.” – Terry & Jake
“I just wanted say how much I enjoyed this years conference. Thank you to you and all your team for all your efforts in putting it on and making it possible. Your work and events like the ESTC are part of what it’s going take to bring about the changes the world so badly needs. So keep up the good work. I learned a lot and enjoyed meeting like minded people from all over North America and different parts of the world. I found the staff at the Eagles very accommodating and friendly. You have a perfect venue…… Also thanks to you, Paul, Jeff and Peter I have information on how to get my MWO working properly and have already started making changes.” – Jim C.
“Just want to mention that my first experience at the 2019 ESTC was very positive. Thanks to you and the hardworking team behind the scenes, I can say that the 2019 ESTC was a success. The presentations were insightful and the networking opportunities made it worthwhile. I believe it was time well spent. Looking forward to the 2020 ESTC.” – Roul M.
“That was my second year at ESTC and it was #AWESOME. Thanks so much for all the hard work from your and the community. I appreciate it. I mentioned to you that I’m looking forward to having the opportunity to purchase that Kit that you and Adam are putting together. Consider me committed and on a list, if there is one. I’ll just follow the instructions once I see them. Thanks again. I’m looking forward to next year.” – Michael E.
“The conference exceeded all expectations!” – Adam B.
There are a lot more updates to come as time permits.
This is a quick 3 minute heads up on what Dr. Jack Hanlon’s presentation at the 2019 Energy Science & Technology Conference will be about. His presentation is called: THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS
Keep in mind that Dr. Hanlon is working on a new video that I’ll post on YouTube that will be narrated with a walk through on some of the basics to orient you his upcoming presentation, which is game-changing and revolutionary!
Recently, I had the privilege of talking to Dr. Jack Hanlon more in depth about his presentation on Geometric Algebra and it is much more powerful than I had initially thought. He gave me some very specific examples where mainstream science says no energy is happening, but it clearly is. He presented a type of “source-code” to being able to reveal this hidden energy using Geometric Algebra. Once it is understood where the energy is happening in reactive power situations, then the first step has been taken in being able to move towards understanding how we might be able to use it to create real measurable work, which is one of the “Holy Grails” of Free Energy.
Eric Dollard’s Versor Algebra is based on the work of Steinmetz who developed it in order to mathematically model and crack Tesla’s polyphase patents on behalf of General Electric who hired him. The application of Versor Algebra for studying polyphase power systems of any number of phases including the self-referencing single phase Tesla mode is possible. It can also be used to analyze planetary phases, the ebbs and flows of the ocean, time and countless other things that have rhythms and motions.
Having worked with Eric for a number of years now regarding this kind of math, which I do not claim to be at any level of proficiency, I can say that Dr. Hanlon’s Geometric Algebra developments will be an excellent foundation for anyone interested in learning what kind of math they should learn in order to mathematically show the basic operating principles of natural energy systems. I can say this because I fully comprehended what Dr. Hanlon shared with me and I have not studied mathematics for nearly 30 years.
After presenting my Hacking the Aether model, which is a “unified field” model for the layman showing possibly what gravity, inertia, time and other natural phenomena are in a simple but seamless method, Professor Haralick suggested that I put some math to it beyond the basic Newtonian Equations to tie it all together. I haven’t seen anything that seems to be a good fit but after talking to Dr. Hanlon, it’s the first time I have had an interest in learning a specific, simple and elegant mathematical method to accomplish my goals. I can only image what it could do for you in your pursuit of advanced energy technologies.
There will be a specific focus on switched reluctance motors/generators but this is far from being the only thing his developments in Geometric Algebra can be used for. Join us at the 2019 Energy Science & Technology Conference to see this landmark presentation in person. 2019 Energy Conference