Search Results for: tesla

Posted on by — Leave a comment

Nikola Tesla and Polyphase Power by Eric Dollard paperback on Amazon link below:

Here is the description: The following text serves to outline the historical, theoretical, and practical development of the Tesla Four Phase System, from its inception to its initial commercial application at Niagara Falls. This also serves as an introduction to the video presentation.

Four Phase has not found the extent of application and theoretical development as has Three Phase. The application of Four Phase has been mainly confined to signal modulation and electrical servo systems. Its application to power systems is practically non-existent, with the exception of certain Poly-Phase rectifier systems in large radio transmitters.

Four Phase, however, offers certain advantages over Three Phase in electric power applications. A salient advantage is its “self replicating” character, which allows for four phases to be derived from two phases by simple polarity reversal, that is, one phase becomes another phase by reversing the winding of that one phase. Most important is the ease of transforming Four Phase Polyphase power into a pair of “Single Phase” power systems.

It is interesting to note that the conventional “wild phase” Delta connected power distribution system can convert to Four Phase with a very simple transformer connection. This is of great advantage when a Three Phase Polyphase system is required to power a load of an exclusively “Single Phase” character.

Get the ebook on Emediapress here:

Nikola Tesla And Polyphase Power

Nikola Tesla And Polyphase Power

The following text serves to outline the historical, theoretical, and practical development of the Tesla Four Phase System, from its inception to its initial commercial application at Niagara Falls. This also serves as an introduction to the video presentation.

Four Phase has not found the extent of application and theoretical development as has Three Phase. The application of Four Phase has…

$17.00
Shop now

Nikola Tesla and Polyphase Power by Eric Dollard paperback on Amazon link below:

Nikola Tesla and Polyphase Power

Nikola Tesla And Polyphase Power

Nikola Tesla And Polyphase Power by Eric Dollard

The following text serves to outline the historical, theoretical, and practical development of the Tesla Four Phase System, from its inception to its initial commercial application at Niagara Falls. This also serves as an introduction to the video presentation.

Four Phase has not found the extent of application and theoretical development as has Three Phase. The application of Four Phase has been mainly confined to signal modulation and electrical servo systems. Its application to power systems is practically non-existent, with the exception of certain Poly-Phase rectifier systems in large radio transmitters.

Four Phase, however, offers certain advantages over Three Phase in electric power applications. A salient advantage is its “self-replicating” character, which allows for four phases to be derived from two phases by simple polarity reversal, that is, one phase becomes another phase by reversing the winding of that one phase. Most important is the ease of transforming Four Phase Polyphase power into a pair of “Single Phase” power systems.

It is interesting to note that the conventional “wild phase” Delta connected power distribution system can convert to Four Phase with a very simple transformer connection. This is of great advantage when a Three Phase Polyphase system is required to power a load of an exclusively “Single Phase” character.

97 Pages PDF format

Posted on by — Leave a comment

NEW RELEASE – 2023 ESTC – Parker Edmondson – Tesla Coil & Diathermy Machine Demonstration

Here’s a FREE download:

In Parker’s demonstration, they will showcase single-wire electrical transmission using two coils tuned to the same frequency. The primary coil, longer in length, will have the secondary coils wrapped around its base. Both primary coils will be wound to 1/4 the wavelength of the transmitted frequency. The connection between the coils will be established by connecting the bottom wire of the primary coils, while the secondary coils wound around the base of the primary coils will serve as reference secondary coils. Parker will connect a signal generator to the secondary (shorter) coil of the sending coil and tune it to the desired transmission frequency. On the identical receiving coil, a LED or similar device will be placed on the secondary (shorter) coil, and as Parker adjusts the signal generator to the resonant frequency of the coil system, the LED will illuminate. In the second part of the demonstration, Parker will power up a diathermy machine and discuss intriguing effects associated with high-frequency alternating current. They will then proceed to light an incandescent bulb using the diathermy machine. If a volunteer is available, Parker may invite them to hold the bulb and touch one side with a metal object while simultaneously touching the diathermy machine with another metal object. This interaction aims to demonstrate the bulb’s illumination through the transfer of energy. If time allows, Parker will further showcase their expertise by lighting a candle or a kerosene lamp using the diathermy machine. Throughout the demonstration, Parker will provide detailed explanations and insights into the underlying principles and phenomena. Attendees can look forward to an engaging and educational experience, gaining a deeper understanding of single-wire electrical transmission, high-frequency effects, and practical applications.

This video is made available for free to help raise awareness about Parker’s work. He is inspiring hundreds of thousands of youth who otherwise would not know about Tesla and the related sciences. This has a list of a bunch of links to his different websites: https://linktr.ee/dr.parkinstine

Tesla Coil And Diathermy Machine

Tesla Coil And Diathermy Machine

In Parker’s demonstration, they will showcase single-wire electrical transmission using two coils tuned to the same frequency. The primary coil, longer in length, will have the secondary coils wrapped around its base. Both primary coils will be wound to 1/4 the wavelength of the transmitted frequency. The connection between the coils will be established by connecting the bottom wire of the prim…

$0.00
Shop now
Posted on by — Leave a comment

NEW RELEASE 2023 ESTC- Griffin Brock – Recent Research On The Tesla Radiant Matter Tube And Related Phenomena

This presentation by Griffin Brock demonstrates fundamental science – for the first time in 120 years, Tesla’s Shadowgraph tube has been perfected and demonstrated. This is one of the most important breakthroughs in the Tesla sciences that has emerged in a long time and we were fortunate to be able to witness this first hand at the 2023 ESTC!

At the close of the Nineteenth Century, research as conducted by Nikola Tesla became exceedingly directed towards high vacuum – high frequency vacuum tubes. Tesla produced a variety of single electrode lamps, some of which manufactured rather unique rays, dubbed as Shadowgraphs. As opposed to succeeding contemporaries including W. C. Röentgen, whom of which proclaimed a similar effect, Nikola Tesla ultimately discovered an exceptional form of ray, similar to conventional Röentgen Rays, while not possessing inherent characteristics. Tesla later dwelled upon these special single-electrode tubes, realizing their implication in radiant matter applications, as well as their electrostatic effects. This presentation will cover the replication and a rigorous scientific exploration into the realm of the Tesla Radiant Matter – Shadowgraph Tube. As well as the covering of perfected versions of the apparatus, not expounded upon since the 1890’s.

See the preview or get a copy here:

Recent Research On The Tesla Radiant Matter Tube And Related Phenomena

Recent Research On The Tesla Radiant Matter Tube And Related Phenomena

This presentation by Griffin Brock demonstrates fundamental science – for the first time in 120 years, Tesla’s Shadowgraph tube has been perfected and demonstrated. This is one of the most important breakthroughs in the Tesla sciences that has emerged in a long time and we were fortunate to be able to witness this first hand at the 2023 ESTC!

At the close of the Nineteenth Century, research…

$37.00
Shop now
Posted on by — Leave a comment

NEW RELEASE – 2023 ESTC – Jeremiah Ferwerda’s Tesla Turbine Powerplant

Last year’s presentation demonstrated a 3 inch diameter Tesla Turbine operating in the cryophorus mode whereby a hot and cold take under vacuum with a turbine in the middle can create a high speed rotation, which can produce electricity. This year, you will witness a production ready prototype of a 6″ diameter Tesla Turbine operating in the same mode, which has already been tested without an electrical load at over 42,000 RPM, which equates to a peripheral speed, which is faster than Mach 1. The goal is to develop this into a viable powerplant.

After the conference, at 260F, the turbine produced 1300 watts. Part of that test is in the preview video but is not included in the conference presentation.

See the preview video on the presentation page.

Tesla Turbine Powerplant

Tesla Turbine Powerplant

The 2022 Energy Science & Technology Conference presentation demonstrated a 3″ diameter Tesla Turbine operating in the cryophorus mode, whereby hot and cold taken under vacuum with a turbine in between them can create a high speed rotation, which can be used to generate electricity. In the 2023 presentation, you will witness a production ready prototype of a 6″ diameter Tesla Turbine operating …

$27.00
Shop now

Tesla Coil And Diathermy Machine

Tesla Coil And Diathermy Machine

In Parker’s demonstration, they will showcase single-wire electrical transmission using two coils tuned to the same frequency. The primary coil, longer in length, will have the secondary coils wrapped around its base. Both primary coils will be wound to 1/4 the wavelength of the transmitted frequency. The connection between the coils will be established by connecting the bottom wire of the primary coils, while the secondary coils wound around the base of the primary coils will serve as reference secondary coils. Parker will connect a signal generator to the secondary (shorter) coil of the sending coil and tune it to the desired transmission frequency. On the identical receiving coil, a LED or similar device will be placed on the secondary (shorter) coil, and as Parker adjusts the signal generator to the resonant frequency of the coil system, the LED will illuminate. In the second part of the demonstration, Parker will power up a diathermy machine and discuss intriguing effects associated with high-frequency alternating current. They will then proceed to light an incandescent bulb using the diathermy machine. If a volunteer is available, Parker may invite them to hold the bulb and touch one side with a metal object while simultaneously touching the diathermy machine with another metal object. This interaction aims to demonstrate the bulb’s illumination through the transfer of energy. If time allows, Parker will further showcase their expertise by lighting a candle or a kerosene lamp using the diathermy machine. Throughout the demonstration, Parker will provide detailed explanations and insights into the underlying principles and phenomena. Attendees can look forward to an engaging and educational experience, gaining a deeper understanding of single-wire electrical transmission, high-frequency effects, and practical applications.

This video is made available for free to help raise awareness about Parker’s work. He is inspiring hundreds of thousands of youth who otherwise would not know about Tesla and the related sciences. This has a list of a bunch of links to his different websites: https://linktr.ee/dr.parkinstine

Part of the 2023 Energy Science & Technology Conference series (13 mins).

Recent Research On The Tesla Radiant Matter Tube And Related Phenomena

Recent Research On The Tesla Radiant Matter Tube And Related Phenomena

This presentation by Griffin Brock demonstrates fundamental science – for the first time in 120 years, Tesla’s Shadowgraph tube has been perfected and demonstrated. This is one of the most important breakthroughs in the Tesla sciences that has emerged in a long time and we were fortunate to be able to witness this first hand at the 2023 ESTC!

At the close of the Nineteenth Century, research as conducted by Nikola Tesla became exceedingly directed towards high vacuum – high frequency vacuum tubes. Tesla produced a variety of single electrode lamps, some of which manufactured rather unique rays, dubbed as Shadowgraphs. As opposed to succeeding contemporaries including W. C. Röentgen, whom of which proclaimed a similar effect, Nikola Tesla ultimately discovered an exceptional form of ray, similar to conventional Röentgen Rays, while not possessing inherent characteristics. Tesla later dwelled upon these special single-electrode tubes, realizing their implication in radiant matter applications, as well as their electrostatic effects. This presentation will cover the replication and a rigorous scientific exploration into the realm of the Tesla Radiant Matter – Shadowgraph Tube. As well as the covering of perfected versions of the apparatus, not expounded upon since the 1890’s.

Part of the 2023 Energy Science & Technology Conference series (120 mins).

Preview

Tesla Turbine Powerplant

Tesla Turbine Powerplant

The 2022 Energy Science & Technology Conference presentation demonstrated a 3″ diameter Tesla Turbine operating in the cryophorus mode, whereby hot and cold taken under vacuum with a turbine in between them can create a high speed rotation, which can be used to generate electricity. In the 2023 presentation, you will witness a production ready prototype of a 6″ diameter Tesla Turbine operating in the same mode, which has already been tested without an electrical load at over 42,000 RPM, which equates to a peripheral speed that is faster than Mach 1. The goal is to develop this into a viable powerplant.

After the conference, at 260°F, the turbine generated 1300 watts. Part of that test is in the preview video but is not included in the conference presentation.

Part of the 2023 Energy Science & Technology Conference series (90 mins).

Preview

The Borderlands Of Nikola Tesla’s Resonant Transformer

The Borderlands Of Nikola Tesla's Resonant Transformer by Eric Dollard & Aaron Murakami

The Borderlands Of Nikola Tesla’s Resonant Transformer – ESTC 2021

To understand where Tesla was taking his work with resonant transformers, this presentation is required study. Tesla was moving away from even using Primary and Secondary coils and was going straight to the Extra (3rd) coils since they were doing all the work anyway – showing unprecedented levels of magnification reaching nearly 600 times.

This is a very complex project with an audio rack and RF rack. They can be used independently or together for a variety of different experiments. These large builds were only shown at the conference so everyone could see what kind of progress has been made – they were not demonstrated. The demonstration shown was with a 100 watt Collins Radio Transmitter from the late 1940’s with two novel “Extra Coils” (no primary or secondary coils are needed), power transfer, the counterspace neutral spot, the flame speaker and some unique plasma demonstrations showing some gases emitting colors that are not known to be associated with such gases – that is not supposed to be possible, but that’s why we’re doing it.

You’re going to see the most amazing plasma demonstration you have ever seen! We’re including a bonus video of some demonstrations we did before the conference that we weren’t quite able to demonstrate live – it’s the super Cosmic Induction Mode where it goes completely wild. Some of this is not in the free preview video – you can only see it when you purchase a copy of this video presentation package.

This presentation has 176 slides that begin with an introduction by Aaron Murakami for the first 20 slides, which sets the stage for the topic and then Eric Dollard continues the presentation with his personal story of what started this all and the following topics are covered:

DIVISION 1

  1. The Borderlands of Electricity
  2. The Cosmic Light Bulb
  3. Cosmic Superimposition, Presented by Dr. James DeMeo
  4. Practical Calculation of the Tesla Resonant Coil

DIVISON 2

  1. The RCA-Bolinas Tesla Transformer
  2. The Second-Generation RCA-Bolinas Tesla Transformer
  3. The Complex Modulated High Frequency Transmitter AN/GRT-1
  4. The Cosmic Induction Phenomenon
  5. Live Demonstration of Cosmic Induction

This download package has 3 zip files.

File 1 – 723 MB with a 2 hour 31 minute presentation plus a PDF of the 176 slide PowerPoint presentation.

File 2 – 837 MB with a 1 hour 27 minute demonstration video.

File 3 – 895 MB with TWO Bonus Videos. Bonus 1 – 40 minutes of the SUPER Cosmic Induction Mode and an interesting blinking phenomena in one particular bulb. Bonus 2 – 18 minutes of experiments at our shop after the conference with Griffin Brock.

2021 Preview

The Cosmic Light Bulb – ESTC 2022

This presentation is a continuation of experiments with the Cosmic Induction Generator process, which elicits unusual plasma activity in the bulbs between the coils. Multiple bulbs were tested for the first time live at the 2022 ESTC, which includes some that were homemade by Griffin Brock.

Hakasays used a higher power RF amplifier setup than the original Collins transmitter used in the Borderlands presentation. The flame speaker was stronger and was able to play some audio that was easily blown out with the Collins. Also, some bulbs had some phenomena not possible with the lower power setup.

Some gases also exhibit different colors that what is supposed to be associated with those gases including the fact that a pure vacuum illuminates, which is still unexplained. It appears it may be some emission from the glass itself, but at this point, it is still speculation.

BONUS – a 35 minute video with a series of experiments done with a carbon button lamp built by Griffin Brock is included.

2022 Preview

Posted on by — Leave a comment

2022 ESTC New Release – Advanced Measurement Techniques for Tesla Coils by Dr. Adrian Marsh

Advanced Measurement Techniques For Tesla Coils by Adrian Marsh

In 2019 when Eric Dollard presented on the 20:1 scale model replica of the Colorado Springs Magnifying Transmitter, Dr. Adrian Marsh was there to help analyze the MWO, the Colorado Springs transformer and more. He was able to quickly figure out how to get the MWO pulse modulator to power the Colorado Springs transformer and several experiments were conducted on the fly.

This year, Dr. Marsh gave a comprehensive overview of using a Vector Network Analyzer to show more information about the resonant peaks, serial vs parallel mode and more. It is must easier to obtain this information with a VNA compared to using a current transformer and analog volt meter. It’s recommended that you do understand the old-school analog method because it is important to understand that but for ultra fine tuning, the VNA is the way to go.

You’ll see a lot of charts produced by the VNA output and Dr. Marsh shares the comparison between a very affordable VNA compared to his HP one that was a $100k unit when brand new. The results are extremely close.

In addition to the VNA presentation, you’ll also see a replication of Eric Dollard’s gold-ratio high voltage discharges! This is the first time this has been replicated by anyone other than Eric to our knowledge. This was done with equipment that Dr. Marsh brought over from the UK in a suitcase.

For the exact VNA used, this is the only one recommended: Vector Network Analyzer

Go here to watch the preview video or get a copy of the full presentation: Advanced Measurement Techniques for Tesla Coils