This is a must have presentation because the Tesla Turbine is one of the “low hanging fruits” when it comes to a technology that is the closest to fulfilling a sustainable energy generator that can power your home or business. With relatively low temperatures, you can have a turbine spinning 10’s of thousands of RPM turning a generator that supplies electricity. There are many variations and applications of the Tesla Turbine technology and the particular one that Jeremiah Ferwerda is focusing on is the “cyrophorus” method.
WATCH THE FREE PREVIEW VIDEO ON THE WEBSITE!
That means there is a hot and cold side to the turbine – the warm water tank boils water at a low temperature because a vacuum is applied to it, that steam drives the drive stage of the turbine and the other side is a vacuum side that pulls a vacuum through the drive stage all the way to the water to keep it boiling at a low temperature.
Solar electricity is about 20% efficient if you’re lucky but what most people don’t understand is that using the sun to heat water is much more efficient. So, with not much effort to heat some water with the sun, you’ll have a solar battery that runs a turbine at high speed making electricity – literally, the concept is as simple as that and for this particular application of the Tesla Turbine, Jeremiah is further ahead that anyone else developing more and more efficient methods with the cyrophorus method. Imagine a solar electric system that winds up being 40, 60, 80 or even close to 100% efficient!
In 2020, Jeremiah presented other aspects of the Tesla Turbine system but that presentation was never released because we were not able to include a demonstration. We’re also releasing this presentation at the same time so you can get either the 2020 1.5 hour presentation or the 2021 1 hour presentation with demo or both at a further discount.
The first presentation we’re releasing is for both the techie and the layman – there is the how-to on our method of creating these special Tesla Coils with unprecedented levels of magnification as well as a plenty of eye candy with some plasma demonstrations that nobody has ever seen – a few of them were even Eric Dollard’s first time seeing them when we were doing some experiments at our shop in Spokane.
The Borderlands Of Nikola Tesla’s Resonant Transformer by Eric Dollard & Aaron Murakami
When new presentations are released, we offer a discount code but you must be subscribed to Energy Times to receive it – in the left column of this website is a sign up form. To see if you missed any coupon code, check the last couple Energy Times in the archives here: https://archive.aweber.com/energytimes
Have you ever seen helium, argon, neon and other gases emit colors that are not associated with those colors? We already know the answer is no, but we’re going to show you various demonstrations that we can accomplish just that when exciting various tubes with the Tesla Resonant Transformer in the Cosmic Induction Generator mode. What kind of physics are we bending or defeating or making obsolete? What does that say for the predicted gases some stars are supposed to have by looking at the colors being emitted – maybe some electrical phenomena exists that are fooling our scientists? We already know the red shift model is false and the premise for the big bang theory is nonsense as Einstein’s Relativity is, but now this? We’re only proposing possibilities, but it is irrefutable that we can change the emitted spectrum of multiple gases when we subject it to our Counterspace node and you’re free to make up your own mind as to what is happening or what it means.
The picture at the top of this post is a demonstration of exactly that. It is “supposed to be” pinkish/purple. Interesting things happen when you place something at a point where it leads into the other dimension, literally, that is what we’re doing.
It’s important to understand, especially if you’re a Tesla enthusiast, that the primary and secondary coils should be avoided at all costs and although Tesla taught this, nobody appears to be putting this into practice and certainly not like what you’re seeing in this presentation. There are primary coils, secondary coils and then tertiary coils, which are the 3rd or “extra coils” and we’re only using the extra coils because that is what is doing all the work anyway. The full embodiment of our extra coils looks like a primary and secondary attached to each other but they’re not. The thick wire coil is where the current resides and the skinny wire coils is where the voltage potential resides and together, they are ONE coil.
You’ll also learn how to calculate the bandwidth and magnification factor for your Tesla coils and although some of this has been shared in some of the blog posts with videos on emediapress.com, this presentation gives you Eric’s full notes on the subject for all the calculations necessary for you to not only understand what we’re doing, but to replicate it as well. We’re only scratching the surface with what we can do with all of this!
If that is too technical for you, enjoy the demonstration part of the video and I’ve included 2 other videos that add an hour to the demonstrations, which were recorded both before AND after the conference. The first free bonus video shows the super amazing, Cosmic Induction Generator effect on a plasma tube from John Bedini’s private collection – a plasma show unlike anyone has ever seen – along with a few extra demonstrations that we recorded after the conference when Griffin Brock brought some bulbs from his collection to the shop including a few he made himself.
This is by far one of the most interesting demonstrations with some of the most important knowledge about Tesla’s Resonant Transformers and we even have a good time introducing the subject with some ideas and thoughts about what lies on the other side since that IS indeed what we are tapping into with the Cosmic Induction Generator. Have fun and enjoy your journey with us to the Outer Limits! 🙂
To understand where Tesla was taking his work with resonant transformers, this presentation is required study. Tesla was moving away from even using Primary and Secondary coils and was going straight to the Extra (3rd) coils since they were doing all the work anyway – showing unprecedented levels of magnification reaching nearly 600 times.
This is a very complex project with an audio rack and RF rack. They can be used independently or together for a variety of different experiments. These large builds were only shown at the conference so everyone could see what kind of progress has been made – they were not demonstrated. The demonstration shown was with a 100 watt Collins Radio Transmitter from the late 1940’s with two novel “Extra Coils” (no primary or secondary coils are needed), power transfer, the counterspace neutral spot, the flame speaker and some unique plasma demonstrations showing some gases emitting colors that are not known to be associated with such gases – that is not supposed to be possible, but that’s why we’re doing it.
You’re going to see the most amazing plasma demonstration you have ever seen! We’re including a bonus video of some demonstrations we did before the conference that we weren’t quite able to demonstrate live – it’s the super Cosmic Induction Mode where it goes completely wild. Some of this is not in the free preview video – you can only see it when you purchase a copy of this video presentation package.
This presentation has 176 slides that begin with an introduction by Aaron Murakami for the first 20 slides, which sets the stage for the topic and then Eric Dollard continues the presentation with his personal story of what started this all and the following topics are covered:
The Second-Generation RCA-Bolinas Tesla Transformer
The Complex Modulated High Frequency Transmitter AN/GRT-1
The Cosmic Induction Phenomenon
Live Demonstration of Cosmic Induction
This download package has 3 zip files.
File 1 – 723 MB with a 2 hour 31 minute presentation plus a PDF of the 176 slide PowerPoint presentation.
File 2 – 837 MB with a 1 hour 27 minute demonstration video.
File 3 – 895 MB with TWO Bonus Videos. Bonus 1 – 40 minutes of the SUPER Cosmic Induction Mode and an interesting blinking phenomena in one particular bulb. Bonus 2 – 18 minutes of experiments at our shop after the conference with Griffin Brock.
Preview
COMBO DISCOUNT
Get John Polakowski’s Cosmic Induction Generator presentation for $10 when bought together with The Borderlands Of Nikola Tesla’s Resonant Transformer
We’re measure the inductance with a B & K meter, conducting some wireless light tests and more. There are TWO videos below, make sure to watch them both.
Get your ticket to the 10th Annual Energy Science & Technology Conference where this will be demonstrated: https://energyscienceconference.com
Donate to EPD Laboratories, Inc. 501(c)3 non profit to support the work of Eric Dollard https://ericpdollard.com
In a few videos such as this, you will learn how to measure what your Tesla Coils bandwidth is as well as the multiplication factor. It’s easy and only requires some basic tools and elementary math.
Get your ticket to the 10th Annual Energy Science & Technology Conference where this will be demonstrated: https://energyscienceconference.com
Donate to EPD Laboratories, Inc. 501(c)3 non profit to support the work of Eric Dollard https://ericpdollard.com
It’s true, for the REAL Tesla Coil, the way Tesla taught but nobody listened, is that it requires no primary or secondary. In order to achieve the highest levels of magification, this is the way.
Get your ticket to the 10th Annual Energy Science & Technology Conference where this will be demonstrated: https://energyscienceconference.com
Donate to EPD Laboratories, Inc. 501(c)3 non profit to support the work of Eric Dollard https://ericpdollard.com
Here is a video recorded a few months ago of Jeremiah with iEnergysupply giving a video walk through of a recent 2-Stage Tesla Turbine assembly. This was recorded at our shop in Spokane.
Jeremiah will be presenting an advanced 2-Stage Tesla Turbine at the 2021 ESTC – get your tickets now while you can: https://energyscienceconference.com
Jeremiah Ferwerda demonstrates the Thermodynamic Transformer inspired and mastered by Nikola Tesla and also shows demonstrations as the main part of his presentation for the purpose of helping the layman understand the workings of the Tesla turbine aka Nikola Tesla’s Thermodynamic Transformer. This is a system that will solve the world’s clean energy crisis by transforming heat from many natural sources into usable energy.
He shows how the Tesla turbine can convert energy from the following sources:
Earth Heat / Earth Battery: Nearly unlimited energy from the earth. The earth is like a giant battery, charged with an average of 55 degrees F, about five feet below the surface. Harvesting the earth’s heat is most practical in the winter and in cold climates. The limitation is the speed in which you can extract the energy over a given amount of time for a small sized system
96% Efficient Solar: It’s about time the world used solar heat collection for electrical energy on a mass scale. Today’s electrical solar panels are only 15-19% efficient. With all this extra power from the sun, there is only one problem: how do you store all that energy? The answer is water. Water can store enormous amounts of energy in the form of heat, and it’s clean, cheap and available to everyone
Waste Heat: All of our machinery today produces losses in energy in the form of heat. If that heat can be transformed back into usable energy, literally all of our machinery can become more efficient
The 2020 presentation on the Tesla Turbine system by Jeremiah was not released after the 2020 conference because the demonstration was not ready so it was not included with the video. We have decided to release it anyway so that this package can be complete. We recommend getting both the 2020 and 2021 and watching them in order for the full picture of Jeremiah’s R & D path, which has led him to the results he is currently able to get.
2022 Presentation – Last year’s cold steam demonstration of boiling water to produce steam under a vacuum had to be carried on a trailer and a truck because it was so large, it took 5 people to set everything up over a couple days. This year the entire demonstration was small enough to fit on a small table and produced more electrical power. Not only that, but the condenser last year had to be submerged in ice to run. This year the small condenser could be carried by one person and ran at 80 degrees Fahrenheit as opposed to last year’s 35 degrees Fahrenheit condenser.
Discoveries and things he learned. An explanation of Nikola Tesla’s self-regulation condition will be given. The turbine behaves like a direct current motor when the condition is achieved. When the turbine is at idle very little steam is used, but when there is a demand for power, more cold steam automatically flows through the turbine to compensate for the added load. In addition, this effect automatically keeps the turbine from going faster then the materials can handle and prevents over speeds.
The below previews are for 2022 (top one) and 2021 is the one below that.
