Here’s the first flame speaker demo from a late 1940’s Collins Transmitter. We’re in the process of testing the tuning unit with the transmitter before we get into the Tesla Coil tests.
The flame speaker is just one small component of our overall objective and is simply an entertainment piece that we use to tune up the system. There is a LOT more to come so stay tuned…
Donate to EPD Laboratories, Inc. 501(c) non-profit corporation to support the work of Eric Dollard https://ericpdollard.com
This new book is based on two reports written by Eric Dollard that was posted on his website for free. They are focusing on how the grid has degenerated in the digital age and how it has become susceptible to EMP attacks, which is a very real threat at this very time. This information is very important and should be considered vital to the security of the nation. A portion of the proceeds from this book go to EPD Laboratories, Inc., which is a 501(c)3 non profit corporation. It helps to support the work of Eric Dollard.
Presently, much discussion exists regarding the proliferation of harmonics in the electric utility system. Moreover, the susceptibility of this system to damage or destruction from a well-positioned nuclear E.M.P. is a subject of great concern. Such problems are not necessarily intrinsic to the process of electric transmission and distribution, but only present themselves when certain configurations exist within the electric utility system. Paramount in any transmission or distribution system is that such system must be a closed system, that is, the electromagnetic boundary condition must be maintained to the highest practical degree. This assures that the entry or exit of extraneous electric forces is minimized.
Presently, with regard to the electric utility system, the electromagnetic boundary condition is being violated in two ways: 1)By the ubiquitous employment of Wye to Wye connected transmission and distribution transformers, and related load configuration2)Through the extension of a common neutral connection throughout the entire electric utility system.
The widespread and enforced adoption of these practices has rendered the electric utility system an open system, or in other words, an antenna system, one of unprecedented proportions. The consequences must be obvious.It is the objective of the following series of engineering reports to re-establish a fundamental understanding of polyphase alternating current, and then apply this understanding to the analysis of the situation as it exists today with regard to the electric utility system.
In this Digital Age, the theoretical basis provided for Electrical Engineering has been defiled, reduced to an assemblage of delusive pronouncements enforced by a cabal of academic theoreticians. What gives authoritative force to their dictates is the overtly complex and convoluted mathematics which enshrouds them. This mathematics in turn becomes a “rite of passage” in teaching and replacing reason and experiment. Once the idols become digitized, they become law, and consequently electricity has become a lost science, relegated to the same scrap heap as alchemy.
However, in historical perspective, the theoretical basis for electrical engineering had achieved a very high level of development at the onset of the 20th century, this to meet the demands of a rapidly developing commercial enterprise, most notably that of the electro-magnetic telegraph and later electric light and power. Electrical science progressed remarkably well in this era, and thus became an exact science which engendered well thought out theories. The foundations of this science were derived from the Experimental Researches of Michael Faraday and their Mathematical Development by Clerk Maxwell. This became known as the “Faraday-Maxwell” Theory of Electricity.
Besides Eric’s personal presentation on Fortescue at the 2021 Energy Science and Technology Conference, which is all about his Versor Algebra mathematics and how it applies to the power grid, Eric and I will be presentation a few demonstrations with the equipment that we’ve been building.
NEW FREE VIDEO WITH BATTERY & SOLAR SECRETS ON YOUTUBE
This is not a promo video sell these solar charge controllers because all the inventory was sold and we’re not producing any more anytime soon. It is to help those that already purchased a S3A12 but that’s not all – you will greatly benefit from this information. Read every bullet point of what is covered in this video.
How to properly hookup and use the S3A12, why the Green light comes on before it is topped
How to properly calculate safe discharges from lead acid batteries
Why the claim that crystalline panels are more efficient than amorphous has no real meaning and why
What the VMP and other specs on the panel means and which ones you need to pay attention to the most
Description of the true topping event so you know the battery chemistry has been reversed to like-new condition
A bit about how to restore some battery life
Why batteries sitting on concrete go bad – it has nothing to do with the concrete
How to use a constant voltage / constant current power supply to imitate a solar panel for testing
Why every solar generator manufacturer or kit supplier are ripping you off with their inverters
Here’s a conversation between Fractal Woman (Lori) and Eric Dollard from last month. Eric was at our shop in Spokane working on the Cosmic Induction Generator that will be shown at the 2021 Energy Science & Technology Conference. Get your tickets now before they’re sold out: https://emediapress.com/shop/energy-science-technology-conference-2021/
Please donate to EPD Laboratories, Inc. to support the work of Eric Dollard. It’s a 501(c)3 non profit and all donations are tax deductible. https://ericpdollard.com
Share this with your friends and please donate to EPD Laboratories, Inc. to help support the work of Eric Dollard. Donations go to EPD Laboratories, Inc. rather than for parts for this project – this project is self funded by me (Aaron).
This is an update from January here at the shop in Spokane with Eric Dollard. We’re working non-stop on this project with the hopes of being able to demonstrate this at the 2021 ESTC – seating is limited, get your tickets here: https://energyscienceconference.com
At this point now, we’re actually 99% done with the audio rack and are making rapid progress on the RF rack, which we will show you very soon. Below are THREE videos that I had time to edit and make avail – there are quite a few pictures and videos that I’ll post in the near future showing more of the progress that we’ve made.
Video #1 below is from January 21, 2021 and is a general update video:
Video #2 below is from January 30, 2021 and is a short video of the old HP Scope that Eric rejuvenated back to life.
Video #3 below is from January 31 and February 2, 2021 and shows the 1940s Collins Transmitter, which sat out in the Arizona desert getting rained on, etc. and it is now in working condition. There are some general updates in addition to some details on the Tesla Coils that the tuning unit will be feeding. Most of the coil project is already built and we’ll show pics/vids of that later.
Here is a video recorded a few months ago of Jeremiah with iEnergysupply giving a video walk through of a recent 2-Stage Tesla Turbine assembly. This was recorded at our shop in Spokane.
Jeremiah will be presenting an advanced 2-Stage Tesla Turbine at the 2021 ESTC – get your tickets now while you can: https://energyscienceconference.com