Here’s the first flame speaker demo from a late 1940’s Collins Transmitter. We’re in the process of testing the tuning unit with the transmitter before we get into the Tesla Coil tests.
The flame speaker is just one small component of our overall objective and is simply an entertainment piece that we use to tune up the system. There is a LOT more to come so stay tuned…
Donate to EPD Laboratories, Inc. 501(c) non-profit corporation to support the work of Eric Dollard https://ericpdollard.com
Besides Eric’s personal presentation on Fortescue at the 2021 Energy Science and Technology Conference, which is all about his Versor Algebra mathematics and how it applies to the power grid, Eric and I will be presentation a few demonstrations with the equipment that we’ve been building.
NEW FREE VIDEO WITH BATTERY & SOLAR SECRETS ON YOUTUBE
This is not a promo video sell these solar charge controllers because all the inventory was sold and we’re not producing any more anytime soon. It is to help those that already purchased a S3A12 but that’s not all – you will greatly benefit from this information. Read every bullet point of what is covered in this video.
How to properly hookup and use the S3A12, why the Green light comes on before it is topped
How to properly calculate safe discharges from lead acid batteries
Why the claim that crystalline panels are more efficient than amorphous has no real meaning and why
What the VMP and other specs on the panel means and which ones you need to pay attention to the most
Description of the true topping event so you know the battery chemistry has been reversed to like-new condition
A bit about how to restore some battery life
Why batteries sitting on concrete go bad – it has nothing to do with the concrete
How to use a constant voltage / constant current power supply to imitate a solar panel for testing
Why every solar generator manufacturer or kit supplier are ripping you off with their inverters
Share this with your friends and please donate to EPD Laboratories, Inc. to help support the work of Eric Dollard. Donations go to EPD Laboratories, Inc. rather than for parts for this project – this project is self funded by me (Aaron).
This is an update from January here at the shop in Spokane with Eric Dollard. We’re working non-stop on this project with the hopes of being able to demonstrate this at the 2021 ESTC – seating is limited, get your tickets here: https://energyscienceconference.com
At this point now, we’re actually 99% done with the audio rack and are making rapid progress on the RF rack, which we will show you very soon. Below are THREE videos that I had time to edit and make avail – there are quite a few pictures and videos that I’ll post in the near future showing more of the progress that we’ve made.
Video #1 below is from January 21, 2021 and is a general update video:
Video #2 below is from January 30, 2021 and is a short video of the old HP Scope that Eric rejuvenated back to life.
Video #3 below is from January 31 and February 2, 2021 and shows the 1940s Collins Transmitter, which sat out in the Arizona desert getting rained on, etc. and it is now in working condition. There are some general updates in addition to some details on the Tesla Coils that the tuning unit will be feeding. Most of the coil project is already built and we’ll show pics/vids of that later.
This is a project that I (Aaron Murakami) have been working on for a while. It is engineered by Eric Dollard and built by myself mostly from scratch. Jeff Moe helped with machining some of the parts but most is hand fabricated with hand tools on my work bench.
There are multiple applications for the system when completed or in other words a lot of different experiments that can be performed because it is being designed to be universal.
We have a bit more to do for the audio rack and still have to do the entire RF rack – next year’s conference will have some of the most incredible Tesla experiments most people have ever seen or heard of.
Recently, I did a simple test recommended by Eric Dollard on the Rotary Electrostatic Converter built by Chris Carson. It is recommended to look at the below post first before watching the video on the recent test.
The capacitor was sped up with a DC motor and then a potential transformer was turned up to about 4500 volts DC and this potential was applied to 1/2 of the capacitor to see if the electrostatic lines would try keep the rotating capacitor plates in phase with the stationary plates. If so, then it should increase the load on the DC motor and reducing it’s speed.
The video is here and there are some more tests to come relating to this:
One of the most popular questions from those who are exploring the reality of “Free Energy” is, “Where do I start”?
The first step is to fully understand that there are no violations of physics with free energy systems. It’s not about more out than in, it’s more out than what we put in. Obviously, that implies there is extra input that we aren’t providing so there is no funny business and no over 100% efficiency claims.
How can a system output more than we put in but be under 100% efficient? If that doesn’t make sense to you, there is a good reason why – the proper distinctions are never taught in school although it is so simple that an elementary school child can understand the principles.
Here are some recommended starting points and why…
Hacking the Aether is a presentation I gave several years ago, which is based on my old book The Quantum Key. It is a fluid aetheric model, which is essentially a unified field model that shows why relativistic effect happen and why, what gravity is, what the real difference is between energy and potential, the basics of open vs closed systems and more. You do not need a technical background to learn the reality about free energy and you will learn the necessary distinctions that you will not learn in school. https://emediapress.com/shop/hacking-the-aether/
Open System Thermodynamics is a section in Hacking the Aether and is probably the most important because it shows Nobel Prize material that says that any system that is open with the environment CAN output more than the operator inputs. Peter Lindemann presented on this at one of our earlier conferences and remains one of the most important presentations we’ve produced. If you want even more irrefutable evidence that Free Energy is legitimate, after watching Hacking the Aether, this is a must see. https://emediapress.com/shop/open-system-thermodynamics/
The Dynamic Ether of Cosmic Space is a must-have book written by Dr. James DeMeo. The ether exists as a matter of fact and Michelson-Morley never disproved anything. As a matter of fact, Michelson defended the ether long after – this truth is in my presentation above but if you want to see the most important collection of studies that have been done all the way to the modern day showing the ether – this book has it. There has never been a compilation quite like this and nobody should receive a degree in physics unless they study and understand this material – it is that important. So with the above two presentations and this book (there is a presentation on this by Dr. DeMeo that came out right before the book), you will understand not only the principles of free energy systems, but you will understand about the source potential itself, which is the ether. https://emediapress.com/2019/10/23/the-dynamic-ether-of-cosmic-space-by-james-demeo-ph-d/
A Common Language for Electrical Engineering – Lone Pine Writings by Eric Dollard is a book, which is available as a paperback on Amazon. It lays out and defines all the basic electrical engineering dimensions. So, now we’re getting to the practical application of real energy science, which actually has its roots in the electrical sciences, which has not been taught for a very long time. Whether you are a newbie or electrical engineering expert, this book is a must have resource: https://www.amazon.com/gp/product/1518815936?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=1518815936
The ARRL Ham Radio License Manual – if I could have started all over 21 years ago when I first met John Bedini, I would have gotten my basic ham radio Technician’s license. The study guide is a basic electrical engineering course that teaches you all the basic components, formulas as well as the basic laws as it applies to radio transmission. This would have greatly cut my learning curve, especially as it applies to high frequency devices like Tesla Coil experiments and related. It’s so simple that even 6 year old children have gotten their basic ham radio license. For the practical application of electrical engineering principles, there is no better start than Eric’s book above and the ARRL manual – go get your ham radio license. It’s inexpensive and simple. https://www.amazon.com/gp/product/1625950829?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=1625950829
If you’re walking into all of this brand new and you actually TAKE ACTION and watch the above presentations and get the books and study them, you will be light years ahead of where any of us were 20, 30 or even 40 years ago. For some very famous people in this field, it has taken a lifetime of research to simply come to these conclusions that are presented in the above material. You can have this in your hands almost instantly and with the books, it may take 1-2 weeks to go through this material repeatedly, it’s impossible to stress the value of this and how fortunate you are that you even have access to all of this.
Then join Energetic Forum here: http://www.energeticforum.com/register – it is one of the leading discussion forums online for all the above topics. It is free to join and fast – once you join, regardless of what emails you receive, send an email to help at emediapress dot com with your username and email you used during registration requesting activation and your account will be activated right away. You can learn from some experts in there, share your experiments, and get answers to a lot of your questions.
Energy Science Forum is also a great resource with less members and there is no approval process, just join, read, post, etc. there is a lot of info shared there that is not in Energetic Forum. http://energyscienceforum.com/register
This call is JAM-PACKED with a lot of info. Jim gives an overview of each and every presentation he gave at the Energy Science & Technology Conference. He also discusses his latest book, which has been released on Amazon – The Meaning of Unity in Energy Conversion Systems.
Then we open up for questions from the callers and there are quite a bit that cover a lot of areas of his work.
Here’s a quick look at the HV Rectifier panel I’m building based on Eric’s design along with more progress on the Linear Audio Modulator.
What’s the point to all of this? I have to 19 inch wide and about 6 ft tall Air Force racks for rack mount equipment. One rack will have all the audio and the other rack will have all the RF equivalents.
The audio rack will have a signal generator that will feed a 30 watt amp, which feeds the audio modulator you see in the video with the 810 tubes, that works in conjunction with the HV rectifier unit, which then outputs to the output transformer. This will turn whatever signal or audio I put into the input into a 5kv output at ultra high fidelity, which can do a lot of things, which I’m not going to reveal yet. If this is all done in time for the conference, there may be a couple demonstrations, which is the goal.
The RF rack will have almost the same setup but for radio frequencies. When mixed with the audio setup, it will be able to demonstrate a flame speaker like what Eric demonstrated at last year’s conference with the 20:1 scale model Tesla’s Colorado Springs Tesla Transformer. However, with the setup I’m building, it may have a flame that is 18 inches long approaching at over 80dB so it will probably literally knock you out of your chair.
The RF side may not be done until next year’s conference. I’m working as fast as I can, which is a challenge since I have to organize the 2020 ESTC and run a couple businesses but I’m getting there!
The 2020 Energy Science & Technology Conference is already 1/3 sold out so get your tickets while you can – come meet Eric Dollard live! http://energyscienceconference.com
You may have seen Tesla coils online outputting audio – but those are almost always PWM (pulse width modulated) and the quality of the sound is similar to a 1980’s Mario Brothers video game so not very impressive. This is RF modulated and is a huge difference. The above-mentioned setup will be the highest quality audio you’ve ever heard in your life as well as being extremely holographic – it will be coming right out of space and is not associated spatially with any speaker or possibly even the flame. If Tesla made a sound system, this is what it would be.
This will also be able to replicate the full Cosmic Induction Generator designed by Eric years ago with the golden ratio discharges and more. It will demonstrate the destruction of energy and quite a few other things that completely smash the so-called “Laws of Physics.”
