It’s no secret that on a large scale, wind energy is not a viable solution as the maintenance is too high amongst countless other problems. It’s actually so bad that it would fail if it weren’t for the government subsidies to keep it floating.
Wind energy on a small scale is much more sensible, but even so, it isn’t that efficient. There is something called the Betz Limit that states that no wind turbine can capture more than 59.3% of the kinetic energy of the wind, but so far wind turbines only capture 30-40% of the wind.
There is a new wind technology that is blowing everything else away and it is 2.3 TIMES more efficient than blade technology and at a 45% reduction in cost.
Saphonian
Welcome to the Saphonian – a bladeless wind generator that takes the energy from the wind and uses it to pump up hydraulic accumulators. Watch it in action – this video is in French but you can see the obvious mechanism:
Many conventionally trained academics deny the possibility that a machine can produce more work than we’re required to supply on the input. As long as a system is open to the environment where more potential energy can enter the machine, then more work can be done than we had to pay for.
The downfall to conventional academia is that the concepts of energy and potential energy are taught completely backwards and there is no accounting for what the actual source potential for electrical charge even is or where it comes from.
Once the distinctions are straightened out, then we can see that not only is it possible to create a free energy machine, if we build them according to the natural principles of open systems, it is practically a requirement for them to output more than we have to input.
Closed system thermodynamics as taught in school only apply to closed heat systems, yet the entire field of physics, etc. try to apply it to electromagnetics, mechanical systems, you name it. The fact of the matter is that conventional closed system thermodynamics actually do not even apply to any natural system in the Universe – because every natural system is open to other sources of potential energy!
We recommend reading a copy of The Quantum Key by Aaron Murakami as a basic primer that explains the reality of free energy systems in terms so simple, only a junior high school level understanding is needed.
The Quantum Key is actually a simplified Unified Field Theory for the layman that links gravity, inertial, electricity, mass, light speed, etc… all together in a seamless manner and even gives a simple explanation of what Time may actually be. Make sure to at least read the descriptions of the chapter on the website below!
This book is available at a hugely discounted price, which will change soon, so make The Quantum Key a part of your library – its a perfect companion to the Bedini SG Trilogy!
The Bedini SG is a “right of passage” for anyone that wants to learn how to actually build real Tesla technology in miniaturized form. It is the best way to start for anyone that is new and even seasoned engineers have a thing or two to learn from it.
Here is a free download that includes Chapter 1 from Bedini SG – The Complete Beginner’s Handbook: Bedini SG
It also reviews the Intermediate and Advanced books and discusses why knowledge of the Bedini SG is a * MUST HAVE * – especially if you’re interested in preparing for the future.
Tesla’s Technology Miniaturized And Simplified For The Masses Legacy of a World-Class Inventor & Humanitarian
Spokane, Washington – November 2, 2014
Fifteen years ago, Shawnee Baughman of Coeur d’Alene, Idaho was competing for an elementary school science project and an electronics wizard happened to work in the same building as her father. She was provided with a simple schematic and a bit of coaching. With that, she went off on her own to build a little motor that spun a wheel, lit an LED light, and ran from the same 9 volt battery for the entire five days of the science fair.
Shawnee won a Blue Ribbon for the science, and a special award for Best of Show, and ever since that time, the machine has been called the “School Girl Motor” or the “Bedini SG” for short.
John Bedini is an internationally acclaimed audio engineer who has many claims to fame, which include developing the first solid state audio amplifiers that actually replicated the sound qualities of the old vacuum tube models. But his favorite hobby has always been the study of advanced energy conservation methods using unconventional electromagnetic principles that most engineers have never heard of.
The Bedini SG has since taken the world by storm, spreading far and wide across the internet, and allowing countless thousands of people to build their own model and study the physics involved. Just about anybody can get one to spin, but only a handful have ever achieved a level of performance that demonstrates what some would consider “free energy.”
Many experts claim this is impossible, but actually there are many systems that produce more work than we’re required to supply, because the excess energy is provided by the environment. A good example of this is the refrigerator. This ordinary kitchen appliance typically operates with a “coefficient of performance” of 2.0, which means that twice as much heat is removed from inside than the equivalent electricity used to do it. Most scientist believe that this kind of performance is only possible with heat systems, but John Bedini and others have demonstrated these principles with electromagnetics as well.
In 1977, Ilya Prigogine received a Nobel Prize for what is basically an extension to conventional thermodynamics, which only describe how heat operates in “closed systems.” Those are systems that are cut off from any external form of energy. Prigogine’s work helped to extend our understanding of thermodynamics to include systems that are open to the environment, which slows the appearance of entropy down and allows more total work to be done than what we have to supply. That is exactly what the Bedini SG demonstrates in a simple and most elegant way.
Several years ago, A & P Electronic Media, a digital publishing company founded by Aaron Murakami and Peter Lindemann published the first ever authoritative book on Bedini’s technology. Murakami and Lindemann have collectively known John Bedini for over 45 years and both have been personally mentored by him.
Their first book outlining the basics of this technology is Bedini SG – The Complete Beginner’s Handbook, which includes all of Bedini’s own personal specifications for building his machines, as well as an in depth explanation of the science and theory behind its operation. With this book, just about anyone can build a working model.
The second book is Bedini SG – The Complete Intermediate Handbook. It digs deeper into the theory of the technology and shows how John’s circuits act like miniaturizations of systems developed by Nikola Tesla over 120 years ago. What this process does is take the high voltage spikes from an electromagnetic oscillator and charge a capacitor with them. This capacitor is then discharged into a load, such as a lead acid battery.
Engineers are normally taught to ground these spikes out so they don’t damage other electronics on an electrical line. In fact, that is what a “surge protector” is designed to do. Through experimentation, John discovered that these electrical transients have a number of unusual characteristics. One of these benefits includes the ability to charge batteries extremely efficiently, and even revive some batteries that are considered dead.
Although many engineers claim these spikes can’t charge a battery because they are just high voltage with virtually no current, there are thousands upon thousands of global experiments being conducted with these circuits that prove otherwise. And if these spikes are used to charge a capacitor and then that capacitor is discharged into a battery, even more amazing results can be had. And this is one of the methods for using electricity that Nikola Tesla developed back in 1893. John’s circuits are literally a miniaturized version of some of Tesla’s greatest discoveries.
A & P Electronic Media has now released Bedini SG – The Complete Advanced Handbook. The finale to this paradigm-shattering trilogy teaches the reader how to convert the mechanical work produced on the wheel into even more electricity, in an extremely efficient way. As a matter of fact, it is so efficient that at the recent 2014 Energy Science & Technology Conference, Peter Lindemann was able to demonstrate how to light a large bank of LEDs to a very bright level without reflecting almost any mechanical load back to the machine.
This third book also reveals many details from John Bedini’s other related technologies, some of which have never been released or explained to the public before. In that sense, it also doubles as a tribute to his tireless contribution to the field of advanced energy research over the last four decades.
The Bedini SG has been around for about 15 years and it seems there is no end to the surprises that occasionally pop up that teach us one thing – we haven’t learned everything about it yet!
On November 2nd, we’re launching Bedini SG – The Complete Advanced Handbook, which shows how to make low drag generators to make the most use of the mechanical work, but there is a whole lot more.
One thing we’re going to full disclose is a special mode that John Bedini developed that allows us to increase the output by 100% with only a 50% increase of the input! How do we only increase the input energy by 50% but DOUBLE the amount that is available on the output? The Advanced book will give the entire schematic and working theory about how and why it works.
On November 2nd, we’re making a video available on the Bedini SG website where we discuss all three books but we even show a demo where the electrical output doubles by only increasing the front input by half.
If you don’t have the first or second book, just wait until November 2nd when you can get your hands on the entire triple combo pack at a huge discount!
With this third book, this trilogy will give more information about real free energy circuits than anything that has ever been published. Especially when we disclose all the circuits necessary to accomplish it.
Live Q & A call with Jim Murray & Paul Babcock taking questions from those who own a copy of their recent presentation The Secret of Tesla’s Power Magnification regarding the principles taught as applied to Jim’s SERPS technology which was shown to have a COP of almost 50.0 (5000%).
Bedini SG – The Complete Advanced Handbook is the most highly anticipated release that we have ever made available.
Two of the most popular books are Bedini SG – The Complete Beginner’s Handbook and Bedini SG – The Complete Intermediate Handbook.
The Beginner’s book walks the reader through all of the exact specification that John Bedini uses to build his own energizers, plus is shows the difference between repulsion and attraction mode which has only been discussed in the last couple years.
The Intermediate book teaches all about Tesla’s Method of Conversion, which is taking the electrical recovery from the coil, charging a capacitor with it and discharging that to a low impedance load like a battery.
The Advanced book will cover in great detail how to turn the mechanical work of the wheel into electricity in a very low draw way but it will also reveal a few more surprises. For the first time ever, details on the famous “Watson Machine” will be disclosed that have never been public as well as details on a few other Bedini technologies. This book has the keys necessary to take everything to the next level like never before.
The release date for Bedini SG – The Complete Advanced Handbook is November 2nd, 2014.
Thirty years ago at the Tesla Symposium in Colorado Springs, Jim Watson demonstrated a very large scale machine based on John Bedini’s 1984 Free Energy Generator.
At the conference, the machine was running and producing a lot of mechanical work, but what was amazing is that it kept itself charged up the whole time!
It had a large three foot diameter flywheel that weighed about 800 pounds attached to an aircraft starter motor, which was battery-powered. The generator section charged a bunch of coils like a magneto, which sent this back to the battery running the machine.
Below is a diagram that John Bedini showed for his smaller prototype.
Between this image and some other diagrams – Jim Watson who had no electrical engineering background make it work.
Over the years, many people have tried and failed at replicating these claims. Very soon, we are releasing Bedini SG – The Complete Advanced Handbook. Included in this highly anticipated release are details about the Watson Machine that nobody has figured out in the last 30 years. And, the keys to making it work have been sitting right there in plain site!
There are already two books: Bedini SG – The Complete Beginner’s Handbook and Bedini SG – The Complete Intermediate Handbook. These are an absolute requirement to have in order to understand the basic working principles of self-regenerative energizers. And with the Advanced book coming, it will take everyone’s experiments and results to the next level!
Since the 2014 Energy Science & Technology Conference, thousands of people have been studying the presentations released and some are even applying the information with real experiments.
Ignition Secrets was so popular because it gives simple step by step instructions on how to build a plasma ignition system.
What makes the Murakami Plasma Ignition so unique is that it allows anyone to use just about any off the shelf CDI (capacitive discharge ignition) or MSD (multiple spark discharge) unit and with simple modifications, turn it into a full blown plasma ignition system. Take note that the energy required to produce the spark in the left side photo is the SAME energy required to produce the plasma impulse on the right.
Many experts in both conventional and unconventional ignition systems have openly claimed that this modification cannot be done to these off the shelf ignition modules because a switch inside of them chops the capacitor off and on too fast, but once again, we’d like to show you that what the “experts” else says is impossible, we are able to actually demonstrate.
Watch this video of my car with an off the shelf performance ignition coil from MSD and a MSD DIS-2 capacitor discharge module for wasted spark ignition systems first produce the normally expected discharge at the spark plug and then watch as it produces the plasma impulse. That causes the capacitor to discharge at an accelerated rate at a negative resistance thereby giving an impulse of all that energy into a smaller unit of time, much smaller than is normally supposed to be possible, which massively amplifies the power right at the spark plug.
https://www.youtube.com/watch?v=l1XSzVG2ppA
That module and ignition coil are only for 4 cylinder wasted spark ignition systems, but MSD makes them for all kinds of engines and those that you see in the video are not even intended for Subaru engines but it works anyway.
Learn more about this amazing plasma ignition method at: Ignition Secrets
THE SECRET OF TESLA’S POWER MAGNIFICATION – LIVE CALL COMING
There is a lot of momentum right now with quite a few projects we’re involved with and we’ll touch on a few of them today.
TESLA TV SERIES
Fred Fuchs who produced Godfather III and Bram Stoker’s Dracula has agreed to produce a TV series called Tesla Man of Light! Stacy James Fry is heading up the campaign to make this happen. Here are details on Tesla Man of Light – make sure to watch both videos – the first is their introduction video and the second is an interview we did with Stacy, which answers a lot of questions about the whole project. http://emediapress.com/2014/10/02/tesla-tv-series-to-be-produced-by-producer-of-godfather-iii-and-bram-stokers-dracula/
Eric Dollard and others even have an opportunity to become consultants for this project as well as having their technologies shown in the actual TV episodes right on Tesla’s bench!
We’re still on track to release this highly anticipated Ebook at the end of October or the beginning of November.
This book picks up where the Intermediate Handbook leaves off and covers all of the major details and spin-offs from John Bedini’s life-time search for the best design of a self-running, electro-mechanical machine.After learning this material, you should understand enough of the science and method that John has shown to start experimenting with larger scale models which should lead to both self-running behavior and the production of enough extra energy to operate external loads.
Not only will this book focus on optimizing electrical recovery with a low drag generator, but it will cover some of John Bedini’s other technologies that have been released in the last 30 years.
For example, the famous “Watson Machine” was demonstrated at the Nikola Tesla Centennial conference put on by the Tesla Society in Colorado Springs in 1984 commemorating Tesla’s arrival to the United States 100 years ago. It was the largest version of John’s original Energizer shown in John’s 1984 book ever shown in public. Many people have tried to replicate this machine over the years but nobody has put all the pieces together even though it’s been in plain site all this time.
In a few days, keep an eye out for another email from us with a link that will give you something to think about when it comes to the Watson Machine.
THE SECRET OF TESLA’S POWER MAGNIFICATION – LIVE CALL COMING
Jim Murray and Paul Babcock co-presented The Secret of Tesla’s Power Magnification at the recent 2014 Energy Science & Technology Conference.
This video shows Jim Murray demonstrating his SERPS technology that produces 20 times more energy heating resistors than the net draw from the power supply! That is 2000% more – https://www.youtube.com/watch?v=aDjWwoD83Rk
Here is an interview we did with Jim & Paul with their other SERPS demonstration that Paul Babcock replicated that shows almost 5000% more work done in lighting incandescent bulbs compared to the net draw from the power supply: https://www.youtube.com/watch?v=rP6fpN6avIc
Everyone who purchased their presentation will be receiving an invitation to a private live call so you can ask them questions about their presentation. If you already have a copy, make sure to confirm an email that says, “Confirm your subscription” because that puts you on the member’s list to receive the invite.
We recommend reading a copy of The Quantum Key by Aaron Murakami as a basic primer that explains the reality of free energy systems in terms so simple, only a junior high school level understanding is needed. 
Shawnee won a Blue Ribbon for the science, and a special award for Best of Show, and ever since that time, the machine has been called the “School Girl Motor” or the “Bedini SG” for short.
A & P Electronic Media has now released Bedini SG – The Complete Advanced Handbook. The finale to this paradigm-shattering trilogy teaches the reader how to convert the mechanical work produced on the wheel into even more electricity, in an extremely efficient way. As a matter of fact, it is so efficient that at the recent 2014 Energy Science & Technology Conference, Peter Lindemann was able to demonstrate how to light a large bank of LEDs to a very bright level without reflecting almost any mechanical load back to the machine.
