This is an update from January here at the shop in Spokane with Eric Dollard. We’re working non-stop on this project with the hopes of being able to demonstrate this at the 2021 ESTC – seating is limited, get your tickets here: https://energyscienceconference.com
At this point now, we’re actually 99% done with the audio rack and are making rapid progress on the RF rack, which we will show you very soon. Below are THREE videos that I had time to edit and make avail – there are quite a few pictures and videos that I’ll post in the near future showing more of the progress that we’ve made.
Video #1 below is from January 21, 2021 and is a general update video:
Video #2 below is from January 30, 2021 and is a short video of the old HP Scope that Eric rejuvenated back to life.
Video #3 below is from January 31 and February 2, 2021 and shows the 1940s Collins Transmitter, which sat out in the Arizona desert getting rained on, etc. and it is now in working condition. There are some general updates in addition to some details on the Tesla Coils that the tuning unit will be feeding. Most of the coil project is already built and we’ll show pics/vids of that later.
This is a project that I (Aaron Murakami) have been working on for a while. It is engineered by Eric Dollard and built by myself mostly from scratch. Jeff Moe helped with machining some of the parts but most is hand fabricated with hand tools on my work bench.
There are multiple applications for the system when completed or in other words a lot of different experiments that can be performed because it is being designed to be universal.
We have a bit more to do for the audio rack and still have to do the entire RF rack – next year’s conference will have some of the most incredible Tesla experiments most people have ever seen or heard of.
LONGITUDINAL WAVE, SIMPLE HOME STUDY KIT – Not everyone has thousands of dollars to spend on a 20:1 scale model replica of Tesla’s Colorado Springs Magnifying Transmitter. Nor does everyone have the technical background or the tools to create one.
Therefore, we are excited to be able to offer a desktop learning kit designed by Adam Griffin, an advanced engineer who has been helping Eric Dollard with various mathematical and engineering challenges related to all of this over the last couple years.
Adam is more than qualified to provide the kind of quality design we wish to offer you through Vril.IO and you can see a bit of his work and developments with this Longitudinal Wave Kit in the videos at the top of the website.
It can’t do many of the high power demonstrations as Eric Dollard’s 20:1 scale model, but it isn’t supposed to either. You can definitely light some LED’s with a single wire to impress your friends, Tesla enthusiasts and even yourself! The bottom line is that it is a Longitudinal Wave generator and it works.
Ernst Willem van den Bergh has been a long time contributor to Energetic Forum and much of his research has been related to Tesla’s Magnifying Transmitter. Eric Dollard and others have corresponded with Ernst for quite some time now as he is a wealth of knowledge regarding Tesla’s history, etc.
There is a new interview of Ernst by Greg Carlwood of The Higherside Chats, which is an online podcast with a lot of very interesting, alternative science topics. Greg’s home page is https://www.thehighersidechats.com/
Listen here for Ernst’s interview:
Below are links with information about Ernst’s 4 books:
Adrian Marsh is very skilled with electrical engineering and has a lab where he has not only done some phenomenal work – his builds are high quality and beautiful as well! If you want not just picture and videos of experiments but hard data and a lot of technical detail based on experimental results, you must visit his website.
ADRIAN’S WEBSITE HAS TWO VIDEOS THAT ARE REFERENCED IN THIS POST – UES THE LINK PROVIDED AT THE BOTTOM OF THIS POST. AND MAKE SURE TO CHECK OUT THE REST OF HIS WEBSITE!
In the picture above, Adrian is explaining to Eric the waveforms that the Vector Network Analyzer is outputting from measurements of the 20:1 scale model Tesla coil replications. Raui Searle, another skilled engineer in the arts is in the background of the picture.
The analyzer being used cost less than $500 USD and is about as accurate as a $100,000 old Hewlett-Packard analyzer! You read that right – for less than $500, you can get the same results as a 6 figure one that has been used by industry for many years!!! It is a MUST HAVE for anyone interested in these experiments.
For quite some time, he has been working on replicating and innovating various experiments based on the teachings of Tesla, Dollard and related. His website is quite a compendium of research on different projects including the old diathermy machines, multiwave oscillator, Tesla’s radiant matter experiment and more.
He has attended a few conference and at the latest 2019 ESTC, he brought a vector network analyzer to measure the 20:1 Colorado Springs replica for Eric Dollard’s presentation but unfortunately, he was unable to do that since much of the equipment was packed up and left prematurely. Instead, he was able to modify the Multiwave Oscillator pulse modulator that I built (my personal unit) for some experiments with the Tesla coils used for Dollard’s 20:1 Colorado Springs replica.
Go here to watch two videos where they are doing the experiments with the MWO pulse modulator and the 20:1 scale model replicate Tesla transformers as well as details on what the Vector Network Analyzer is measuring. Click below…
In the last few years, Prof. Haralick became interested in subtle energy research but many of the experimental results were not explainable by the common paradigm. Some of his work in this area was presented at the last couple Energy Science & Technology Conferences.
It became apparent to him that there should be a theory that can begin to explain some of this unusual phenomena.
His interest was primarily focus on whether or not Maxwell’s Equations could be generalized so that it could be used to explain some of this work specifically including the type of work Tesla was involved with in the early 1900’s regarding longitudinal waves.
Prof. Haralick will walk you through a very specific sequence of segments that include:
James Clerk Maxwell – an interesting biographic sketch that quite likely, many mathematicians and engineers have not heard of.
The Maxwell Equations in Modern Form – a general review to set the stage for a comparison of the rest of the presentation.
Maxwell’s Original 20 Equations – this takes you back to the original 1865 paper that he had before he wrote his treatise. Prof. Haralick has a strong intent to figure out what was in those equations in the way that Maxwell wrote them because what many people have said is that what Maxwell had in his equations are not the same as what the Heaviside-Biggs Equations are that are currently used.
Quaternions – this goes into the quaternion algebra, which sounds complicated but if you have any background in the most basic high school algebrea, you’ll understand quite a bit of it.
Quaternion Generalized Maxwell Equations – you’ll then be walked through the derivation and this derivation admits to a longitudinal electric wave along with the scalar wave and this type of “scalar wave” will most likely shock you. So far this comprises a little less than half of the presentation.
Tesla, Galinas, Zimmerman, & Hively – the rest of the talk regarding the work of these men, what they built and what they wrote that is relevant to this kind of generalizaton as well as other related topics. Some of the material covered in this section may reveal to you some thing that you have not previously realized – especially regarding Tesla’s work.
Get a copy of this presentation so you can have an authoritative analysis of Maxwell’s Equations that reveals a very specific type of “scalar wave”, which not been openly discussed in any literature on the subject.
This presentation covers the difference between Tesla’s balanced method and Lakhovsky’s unbalanced method. Other aspects of the MWO pulse modulator are also presented that are normally considered proprietary information.
* NEW RELEASE * THEORY, CALCULATION & OPERATION OF THE COLORADO SPRINGS TESLA TRANSFORMER BY ERIC DOLLARD
We’re very excited and honored to be a part of history where Eric Dollard shows a working 20:1 scale model replica of Nikola Tesla’s Colorado Springs Magnifying Transformer!
If you ever wanted to know the truth down to the finest detail on what Tesla actually did, here is your opportunity. Not only will you learn the operating theory and more data than you will ever want to know, you’ll get all details on how to replicate a 20:1 scale model along with an actual demonstration by Eric Dollard and Bruce Gavin. So, it’s not just talk, you see the demonstration that blew everyone away!
Attendees from 9 countries and from 48 out of 50 states helped make this year’s 8th Annual Energy Science & Technology Conference another magical experience. There were about 20 presentations from an amazing group of speakers including Dr. James DeMeo, Prof. Robert Haralick, Dr. Jack Hanlon, Eric Dollard and many others.
The presentations will be produced in digital downloads available through Clickbank like usual and this begins next week with the editing. We may start releasing them by the end of next week. The goal is to make 2-3 available per week until they’re all available.
Here are just a few pictures to give you a glimpse of what happened this weekend. There are a lot more to come including some slideshows.
Tesla Colorado Springs
Here are a few comments from some of the attendees:
“For all of what you have done. It was our first time and we will walk away with networking opportunities and a large amount of knowledge. Thanks to you and the great presenters.” – Terry & Jake
“I just wanted say how much I enjoyed this years conference. Thank you to you and all your team for all your efforts in putting it on and making it possible. Your work and events like the ESTC are part of what it’s going take to bring about the changes the world so badly needs. So keep up the good work. I learned a lot and enjoyed meeting like minded people from all over North America and different parts of the world. I found the staff at the Eagles very accommodating and friendly. You have a perfect venue…… Also thanks to you, Paul, Jeff and Peter I have information on how to get my MWO working properly and have already started making changes.” – Jim C.
“Just want to mention that my first experience at the 2019 ESTC was very positive. Thanks to you and the hardworking team behind the scenes, I can say that the 2019 ESTC was a success. The presentations were insightful and the networking opportunities made it worthwhile. I believe it was time well spent. Looking forward to the 2020 ESTC.” – Roul M.
“That was my second year at ESTC and it was #AWESOME. Thanks so much for all the hard work from your and the community. I appreciate it. I mentioned to you that I’m looking forward to having the opportunity to purchase that Kit that you and Adam are putting together. Consider me committed and on a list, if there is one. I’ll just follow the instructions once I see them. Thanks again. I’m looking forward to next year.” – Michael E.
“The conference exceeded all expectations!” – Adam B.
There are a lot more updates to come as time permits.
In this call, Ernst’s shares about the relevance of Stan Meyer’s waveform in generating more current, how his experiment indicates receiving a signal from the inner Earth, a “flywheel” type effect where the power of the Tesla Transmitter gets stronger over time and it takes a while for it to die down, some of Tesla’s quotes, and distinctions between the aether and a gaseous medium.
Eric Dollard also called in to share his feedback on Ernst’s experiments. Both agree that Tesla definitely changed his tune after Colorado Springs.
There is a LOT of information inside this video – Ernst helped to edit it by adding a lot of info relevant to the call, which relates directly to Tesla and his own work.