Zero Force Motor Part 2 – Hidden Dance by Yaro Stanchak
At the 2018 Energy Science & Technology Conference, more revelations are disclosed about the last one year of experiments with the Zero Force Motor.
Within this follow up presentation, you will find all the specs, which should be considered a standard built for more experiments to get start with. It works and has already been proven out by Yaro Stanchak and James McDonald.
Yaro also shares the differences in more detail on attractive vs repulsive mode and how this looks diagrammatically so the viewer can benefit from these findings. A thorough walk-through on the Zero Force Motor’s timing characteristics of the magnet’s geometry in relation to the coil geometry is covered. This is very important and cannot be stated enough – timing is crucial and can make or break your results.
Get 25% off for a limited time with this coupon: ZFM25
Keep in mind this is a developmental process and there are no free energy claims. It is a novel motor with unique aspects that have not been used or exploited in conventional motors and bit by bit, the potential of what this machine is capable of is slowly revealing itself.
Pay close attention to the date in the table presented by Yaro. You may find there is more than meets the eye. And you will definitely see that at certain RPMs, which may indicate some resonant points that you will see the Hidden Dance happening within the machine as Yaro shows on the scope.
There is also a difference in the characteristics of how the motor operates in relation to its waveforms that are measurable if the ZFM is running on a battery compared to a linear current power supply. In other words, there appears to be advantages to running it on a battery compared to a power supply. Professor Robert Haralick during questions points out a very plausible reason for this and that is that when running, the ZFM is producing longitudinal waves that are accepted by the battery(s) but the linear amp power supply cannot.
This would be completely consistent with John Bedini’s experience over the years with experiments on the Bedini SG when running on and charging batteries, which have shown unusual input vs output ratios and most of this disappears when running these machines on conventional power supplies. It has been stated over the years that the battery is very important as part of the open system and once again, these ZFM experiments shown by Yaro seem to indicate the same results.
Here are a few of the subjects that Yaro will show in this presentation:
Introduction and Brief Review Of Zero Force Motor Design and Operation
Uncovering the Missing Secrets of Magnetism by Ken Wheeler
Uncovering the Missing Secrets of Magnetism by Ken Wheeler– At the 2018 Energy Science & Technology Conference, Ken Wheeler gave his first ever presentation to a live audience, in person, and in this format, which is available in this video presentation. It has the same title as the book, which is Uncovering the Missing Secrets of Magnetism.
Ken covers a massive amount of information that he compressed into 90 minutes, which obviously he could have gone on for hours.
He covers:
He covers the nature of magnetism, which you will never find in a text book because largely, the academic world has no idea what magnetism is and they even admit it.
He goes into the various geometries related to the various aspects of magnetism.
The difference between small and large magnetic fields and why many people are disappointed when they learn the difference.
The results from many of his own experiments using magnets on seeds, etc.
Some vocabulary that on the surface appears to be simply jargon, but you will learn that certain words are used very specifically to make important distinctions.
How to build the advanced Ferro fluid cells, which are invented by his associates. This is perhaps the first ever open disclosure on this method.
How he used some of these methods for a very specific type of blood analysis.
Mineral, Vegetable and Animal Life by Edward Leedskalnin
Ed Leedskalnin, known for his amazing construction marvel Coral Castle, is credited with inventing a “Perpetual Motion Holder”, which consists of a U shaped core with a coil on both sides that are connected in criss-cross fashion. There is an iron keeper that closes the gap and when a battery is connected to the two coils, the keeper stays magnetized to the U permanently. This causes an internal magnetic current to run in the loop perpetually and when the keeper is finally removed by force, the magnetic field collapses and it causes the coils to output electricity.
The image above is a book cover to one of Ed Leedskalnin’s books, Mineral, Vegetable and Animal Life, which has the Perpetual Motion Holder depicted on the cover.
The Perpetual Motion Holder works as claimed and it is easy to build. What is interesting is that it is normally thought that current has to be supplied to the coils in order for the metal to become magnetized and when the current is removed, the magnetization disappears. However, this is not the case as is easily demonstrated by the Perpetual Motion Holder. Many people have had these devices magnetized for many, many years and no matter how long, when the remove the keeper, the coils output a pulse of electricity. It can be measured with a meter or you can see that it will light an LED, etc.
Einstein said that the key to creativity is to hide one’s sources and in this case, that is exactly what Ed Leedskalnin did. It was known that Leedskalnin was very studious and he examined much of the literature of his day regarding electricity, magnetism, biology, etc. During this time, one of the most famous books on magnetism, which is still a valuable resource was first published in the 1840’s and spelled out the Perpetual Motion Holder, but with a very different name – 100% exact explanation of the results of the device.
Davis’s Manual on Magnetism was one of the first and most popular books that detailed this device and virtually every technically oriented scholar at Princeton in that day knew of it. This is NOT the first reference to this device, but it is one of many from it’s time. There is an earlier reference and we’ll get to that soon.
Davis’s Manual on Magnetism – below are some pages from the book’s title page and the relevant pages for the Perpetual Motion Holder. Please read the comments in between some of the images:
You can see on page 75 above that image 126’s description is that of the Magic Circle – the original name for the Perpetual Motion Holder. If you have two semi-circles attached with a coil of wire around a side of this circle and charge it, the two iron semi-circles with stick together. If you remove the electricity, they continue to stick.
Below on page 76, you see a variation of this with handles that two people can pull on to demonstrate just how strong this effect is. And you see the details of its interesting properties:
“If the flow of the current in the coil is stopped while the armatures are applied to each other, as shown in figures 50 and 51, they will still continue firmly attached; but if once separated, will not adhere again.” Below, you see in Fig. 53, the classic “STRONG” type of electromagnet as used by Ed Leedskalnin and is apparently invented by Prof. Henry who is mentioned in section 132 at the bottom of the page. We’ll discuss Prof. Henry soon.
Above is an image of another variation of the Magic Circle, which is designed for much stronger variations. It is a hybrid between the original Magic Circle and the strong electromagnet with coils on both legs of the horseshoe shaped core.
Below, it says, “If, however, the armature is applied to the poles, and the flow of the current is stopped while it is attached, it will continue to adhere for weeks or months with great force, so as to be able to sustain one third or one half as much weight as while the current was circulating. But if the keeper be once removed, nearly the whole magnetism will disappear, and the magnet, if of good iron, will not even be able to lift an ounce. The polarity of the magnet will of course be reversed by changing the direction of the current.”
That statement reveals that some of the power actually is lost after removing the battery, but for the most part, it sticks until manually removed – or until electricity with the opposite current is applied.
So there you have it, the full revelation of the “Perpetual Motion Holder from the 1840’s. The mention of Prof. Henry is very important because not only is he the inventor of these stronger electromagnets that went way beyond what anyone had developed before, but he appears to also be the inventor of the Magic Circle.
Joseph Henry was a contemporary of Michael Faraday and independently discovered the Laws of Electromagnetic Induction but about on year after Faraday. The unit of measurement for inductance is named after Joseph Henry.
In some of Joseph Henry’s notes, which are documented in a book called The Paper of Joseph Henry edited by Nathan Reingold, we see the earliest mention of the Magic Circle. This book details papers by Joseph Henry from November 1832 to December of 1835, which are called “The Princeton Years”.
Joseph Henry’s Magic Circle
Clearly, the editor of the book had absolutely no idea what the reference to the Magic Circle meant, but now you do! And it was in Joseph Henry’s notes around 50 years before Ed Leedskalnin was ever born.
This is the origin of the Perpetual Motion Holder, what is was originally called and who invented it. Please give credit where credit is due. The next time someone tells you about the Perpetual Motion Holder by Ed Leedskalnin, please kindly refer them to this page.
Please understand that this is not intended to take anything away from Ed Leedskalnin’s very interesting work but rather to correct a common misunderstanding about the Perpetual Motion Holder.
If you want to know how to make a simple one, this is one of the simplest How-To videos you can find:
The operating theory behind what maintains that magnetism is a whole other topic, but suffice to say, there is a magnetic current that is put into circulation around the loop. Many conventionally minded people do not believe in magnetic currents as they think a piece of metal that is magnetized only has a static field that just sits there. My opinion is that they are wrong, but that is another story.
Many years ago, John Bedini and I were discussing toroidal coils and he shared with me his belief that there is a magnetic current that is always in circulation around the ferrite core. The question then is how do we tap it for energy production? We did not come to a satisfactory answer, but something along these lines is possibly happening with Steve Marks’s TPU (Toroidal Power Unit).
One thing you might find very interesting is that conventional science has indeed discovered a never-ending perpetual electrical current in circulation in closed metal rings.
Abstract says: Quantum mechanics predicts that the equilibrium state of a resistive metal ring will contain a dissipationless current. This persistent current has been the focus of considerable theoretical and experimental work, but its basic properties remain a topic of controversy. The main experimental challenges in studying persistent currents have been the small signals they produce and their exceptional sensitivity to their environment. We have developed a technique for detecting persistent currents that allows us to measure the persistent current in metal rings over a wide range of temperatures, ring sizes, and magnetic fields. Measurements of both a single ring and arrays of rings agree well with calculations based on a model of non-interacting electrons.
Paul Babcock discussed this core material a long time ago starting with an interview I did with him near the time of our first conference. You can search my channel for Paul Babcock and related interviews: Paul Babcock
This is a very simple and effective way to make a core for an electromagnet that has very fast switching times and this is important if you want the oscillatory transients to have the highest possible voltage – this is what most people call the “spike”.
The video shows an entire how-to on this method – it could have been a 5 minute video, but I decided to just show the whole thing to answer any possible questions.
Ronald Brandt was a brilliant experimenter who was successful in developing many Tesla and related technologies. He associated with many of the legends of the “Free Energy” and Tesla Sciences field including the late John Bedini who he shared his well-known “Tesla Switch” plans with that ran an electrical motor in a unique way that allowed the batteries to stay charged up while producing an abundance of mechanical work.
With a different methodology, he developed a generator technology that had high energy gains based on synchronizing various resonances in the system and this serves as the foundation for the Quantum Energy Generator or QEG project, which became an internationally known phenomena by Hope Girl and the Fix the World Organization.
The QEG is a switched/variable reluctance, variable frequency generator that uses mechanically pumped parametric resonance (tank circuit) to generate up to 30,000 volts of reactive power in its primary windings.
The reactive power in the core is then converted to real power by the secondary windings.
The QEG has 2 modes of operation; conventional mode, which produces about 800 Watts peak output for 1,000 Watts input, and resonance mode, where the machine is operated at a particular RPM/frequency to excite the fundamental mechanical resonant frequency (around 2.4kHz) from a lower order harmonic.
In resonance mode the machine appears to be capable of overunity due to the output voltage increase afforded by the vibration of the core steel when the machine is driven into resonance.
Join us in exploring the possibilities by unifying all parts of the generator as one synchronized energy machine.
Multiple Order Harmonics – Tuning the QEG by James Robitaille
It’s interesting how so much Joseph Newman information keeps getting yanked from the Internet. That happened when I announced that NEWMAN, the new documentary was available. The moment my newsletter went out, Amazon removed the video!
Keep in mind that you have to outsmart the popups to watch it and we cannot and will not offer support to help with that. Also, we do not know the copyright status of that movie. We recommend you write to the creator of the documentary and request permission to purchase a copy from him if it is available for sale.
There are some excerpts from Joseph Newman’s interview by Johnny Carson on the Tonight Show, but we have never seen the entire full version. They’ve all been yanked from the Internet as I was told it used to be online all over the place.
Janeen Warnke recently posted it on Vimeo – Pentarbe at Energetic Forum brought it to everyone’s attention. Here it is – Vimeo allows you to download it if you go to their page – we also do not know the copyright status of this video so download it at your own risk: https://vimeo.com/226659147 (copy and paste that into a browser)
Although we are not infringing on any possible copyrights since we are not hosting this material, we are posting this FAIR USE DISCLAIMER: Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.
NOTICE: THIS VIDEO IS NOT HOSTED ON THIS WEBSITE, IT IS AT VIMEO AT THE ABOVE LINK.
SHARE THIS WITH YOUR FRIENDS AND HELP GET THIS OUT WITH THE FACEBOOK, TWITTER AND OTHER SHARE BUTTONS BELOW!!!
NEWMAN MOTOR FULL DISCLOSURE – COMING TUESDAY THE 25TH
Day after tomorrow on Tuesday, we are releasing Geoffrey Miller’s Full Disclosure on the Newman Motor. It will come with a 1 hour 55 minute presentation, a 102 page PDF of the PowerPoint presentation, 4 rare pics of Geoffrey Miller with Joseph Newman – 1 of the pics is of a letter from Newman thanking Geoffrey, a very important Newman Motor commutator diagram and a link to an online FULL VERSION copy of Joseph Newman’s own book – The Energy Machine of Joseph Newman, which is almost 600 pages!
Some people have heard about the legendary magnet that picks up gold for years, but for some reason, no matter how much info has been available on it, only a few people have ever replicated it.
Jeff Moe’s uncle appears to be the original inventor of it so you’re hearing it from the person who is the closest to the source that we know of.
This magnet literally picks up gold, silver, copper, aluminum and any other non-ferrous metal!
Jeff’s presentation covers the operating theory and method of how it actually works and he covers how to build one.
For many decades, Coral Castle built by Ed Leedskalnin has been a mystery with speculation that free energy and anti-gravity technologies have been involved with the construction.
This video documentary is created by Scott Russell and is by far the most sensible explanation as to how Ed Leedskalnin actually built Coral Castle.
It’s a bit disappointing that there isn’t more of a mysterious energy source of technology behind it so it takes a bit of fun out of it, but if Scott Russell’s analysis is even half correct, it is still a very profound piece of work.
This video has been online for a couple years now and I only just now came across it and wanted to share it with you. It is still an engineering marvel and the methods that Ed Leedskalnin used are no less amazing – if this is indeed how he did it.
This video is only about 25 minutes long and is well worth the time it takes to watch it. I think you’ll have to agree that it certainly looks like Russell may have nailed it – we’ll never know 100% for sure, but it certainly appears pretty close.
If you want to see some of the interesting speculations and discussions on Ed Leedskalnin and his work over the years at Energetic Forum, check this out: Ed Leedskalnin
There are many technical details, drawings and theories relating to John Bedini’s work that he never openly shared. Some drawings he posted for a short time in some private groups, others he gave to myself and others and many of his ideas he only spoke of to those who were closest to him.
Recently, I started a discussion thread at Energy Science Forum called John Bedini’s Magnetic Model. The forum is a website that John Bedini and I started several years back, which is the official John Bedini forum. It’s not as popular as Energetic Forum, but the focus is narrower and it is a treasure trove of information.
I started to share a bit about John’s magnetic model, which is heavily related to the 23.5 degree tilt of the Earth and this is what is represented by the diagonal line that he has drawn in many coil and magnet diagrams. Below is an example:
John Bedini’s Magnetic Diagram
Many of you have probably seen this image, but there are many that have been posted in the new discussion thread, which very few people have seen – and depending on the interest, more might be posted, which even many of his closest friends have never seen.
For now, there are some rare details posted about how John saw magnetic interactions as well as a bit of history that nobody has heard before. There will be more to come…
The images are all copyrighted by John Bedini so they are property of his family and are not to be reposted outside of Energy Science Forum.
Below, you see in Fig. 53, the classic “STRONG” type of electromagnet as used by Ed Leedskalnin and is apparently invented by Prof. Henry who is mentioned in section 132 at the bottom of the page. We’ll discuss Prof. Henry soon.
Paul Babcock discussed this core material a long time ago starting with an interview I did with him near the time of our first conference. You can search my channel for Paul Babcock and related interviews: 
