Please donate to EPD Laboratories, Inc., 501(c)3 non-profit. All donations are tax deductible. Donation info is in the right column at https://ericpdollard.com

For an authoritative presentation covering the topic in the below video, go here:

On Dec 12, 2021, we held a live call where Eric Dollard addressed the Veritasium video in detail. After this topic is discussed, other topics were discussed. Listen to the call with a slideshow here:

This new book is based on two reports written by Eric Dollard that was posted on his website for free. They are focusing on how the grid has degenerated in the digital age and how it has become susceptible to EMP attacks, which is a very real threat at this very time. This information is very important and should be considered vital to the security of the nation. A portion of the proceeds from this book go to EPD Laboratories, Inc., which is a 501(c)3 non profit corporation. It helps to support the work of Eric Dollard.

Presently, much discussion exists regarding the proliferation of harmonics in the electric utility system. Moreover, the susceptibility of this system to damage or destruction from a well-positioned nuclear E.M.P. is a subject of great concern. Such problems are not necessarily intrinsic to the process of electric transmission and distribution, but only present themselves when certain configurations exist within the electric utility system. Paramount in any transmission or distribution system is that such system must be a closed system, that is, the electromagnetic boundary condition must be maintained to the highest practical degree. This assures that the entry or exit of extraneous electric forces is minimized.

Presently, with regard to the electric utility system, the electromagnetic boundary condition is being violated in two ways: 1)By the ubiquitous employment of Wye to Wye connected transmission and distribution transformers, and related load configuration2)Through the extension of a common neutral connection throughout the entire electric utility system.

The widespread and enforced adoption of these practices has rendered the electric utility system an open system, or in other words, an antenna system, one of unprecedented proportions. The consequences must be obvious.It is the objective of the following series of engineering reports to re-establish a fundamental understanding of polyphase alternating current, and then apply this understanding to the analysis of the situation as it exists today with regard to the electric utility system.

In this Digital Age, the theoretical basis provided for Electrical Engineering has been defiled, reduced to an assemblage of delusive pronouncements enforced by a cabal of academic theoreticians. What gives authoritative force to their dictates is the overtly complex and convoluted mathematics which enshrouds them. This mathematics in turn becomes a “rite of passage” in teaching and replacing reason and experiment. Once the idols become digitized, they become law, and consequently electricity has become a lost science, relegated to the same scrap heap as alchemy.

However, in historical perspective, the theoretical basis for electrical engineering had achieved a very high level of development at the onset of the 20th century, this to meet the demands of a rapidly developing commercial enterprise, most notably that of the electro-magnetic telegraph and later electric light and power. Electrical science progressed remarkably well in this era, and thus became an exact science which engendered well thought out theories. The foundations of this science were derived from the Experimental Researches of Michael Faraday and their Mathematical Development by Clerk Maxwell. This became known as the “Faraday-Maxwell” Theory of Electricity.

One of the most popular questions from those who are exploring the reality of “Free Energy” is, “Where do I start”?

The first step is to fully understand that there are no violations of physics with free energy systems. It’s not about more out than in, it’s more out than what we put in. Obviously, that implies there is extra input that we aren’t providing so there is no funny business and no over 100% efficiency claims.

How can a system output more than we put in but be under 100% efficient? If that doesn’t make sense to you, there is a good reason why – the proper distinctions are never taught in school although it is so simple that an elementary school child can understand the principles.

Here are some recommended starting points and why…

Hacking the Aether is a presentation I gave several years ago, which is based on my old book The Quantum Key. It is a fluid aetheric model, which is essentially a unified field model that shows why relativistic effect happen and why, what gravity is, what the real difference is between energy and potential, the basics of open vs closed systems and more. You do not need a technical background to learn the reality about free energy and you will learn the necessary distinctions that you will not learn in school. https://emediapress.com/shop/hacking-the-aether/

Open System Thermodynamics is a section in Hacking the Aether and is probably the most important because it shows Nobel Prize material that says that any system that is open with the environment CAN output more than the operator inputs. Peter Lindemann presented on this at one of our earlier conferences and remains one of the most important presentations we’ve produced. If you want even more irrefutable evidence that Free Energy is legitimate, after watching Hacking the Aether, this is a must see. https://emediapress.com/shop/open-system-thermodynamics/

The Dynamic Ether of Cosmic Space is a must-have book written by Dr. James DeMeo. The ether exists as a matter of fact and Michelson-Morley never disproved anything. As a matter of fact, Michelson defended the ether long after – this truth is in my presentation above but if you want to see the most important collection of studies that have been done all the way to the modern day showing the ether – this book has it. There has never been a compilation quite like this and nobody should receive a degree in physics unless they study and understand this material – it is that important. So with the above two presentations and this book (there is a presentation on this by Dr. DeMeo that came out right before the book), you will understand not only the principles of free energy systems, but you will understand about the source potential itself, which is the ether. https://emediapress.com/2019/10/23/the-dynamic-ether-of-cosmic-space-by-james-demeo-ph-d/

A Common Language for Electrical Engineering – Lone Pine Writings by Eric Dollard is a book, which is available as a paperback on Amazon. It lays out and defines all the basic electrical engineering dimensions. So, now we’re getting to the practical application of real energy science, which actually has its roots in the electrical sciences, which has not been taught for a very long time. Whether you are a newbie or electrical engineering expert, this book is a must have resource: https://www.amazon.com/gp/product/1518815936?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=1518815936

The ARRL Ham Radio License Manual – if I could have started all over 21 years ago when I first met John Bedini, I would have gotten my basic ham radio Technician’s license. The study guide is a basic electrical engineering course that teaches you all the basic components, formulas as well as the basic laws as it applies to radio transmission. This would have greatly cut my learning curve, especially as it applies to high frequency devices like Tesla Coil experiments and related. It’s so simple that even 6 year old children have gotten their basic ham radio license. For the practical application of electrical engineering principles, there is no better start than Eric’s book above and the ARRL manual – go get your ham radio license. It’s inexpensive and simple. https://www.amazon.com/gp/product/1625950829?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=1625950829

If you’re walking into all of this brand new and you actually TAKE ACTION and watch the above presentations and get the books and study them, you will be light years ahead of where any of us were 20, 30 or even 40 years ago. For some very famous people in this field, it has taken a lifetime of research to simply come to these conclusions that are presented in the above material. You can have this in your hands almost instantly and with the books, it may take 1-2 weeks to go through this material repeatedly, it’s impossible to stress the value of this and how fortunate you are that you even have access to all of this.

Then join Energetic Forum here: http://www.energeticforum.com/register – it is one of the leading discussion forums online for all the above topics. It is free to join and fast – once you join, regardless of what emails you receive, send an email to help at emediapress dot com with your username and email you used during registration requesting activation and your account will be activated right away. You can learn from some experts in there, share your experiments, and get answers to a lot of your questions.

Energy Science Forum is also a great resource with less members and there is no approval process, just join, read, post, etc. there is a lot of info shared there that is not in Energetic Forum. http://energyscienceforum.com/register

This call is JAM-PACKED with a lot of info. Jim gives an overview of each and every presentation he gave at the Energy Science & Technology Conference. He also discusses his latest book, which has been released on Amazon – The Meaning of Unity in Energy Conversion Systems.

Then we open up for questions from the callers and there are quite a bit that cover a lot of areas of his work.

Eric Dollard will be giving two presentations at the 2020 ESTC and will be co-presenting with myself for my own presentation.

The first presentation is based on Oliver Heaviside’s work. In the late 1800’s Heaviside wrote a series of articles for the British magazine The Electrician, which is the first magazine for electrical engineering. The title for this collection is called Electromagnetic Induction and it’s Propagation.

Eric’s presentation is a sequel to this collection of papers.

The second presentation is based on a paper called The Method of Symmetrical Coordinates Applied to the Solution of Polyphase Networks by Charles Fortescue. It was published by the IEEE in 1918. You can get a copy here: http://www.energyscienceforum.com/files/fortescue/methodofsymmetrical.pdf

Eric’s presentation on this topic is also a sequel to this paper.

These are very important topics for electrical engineering and Eric Dollard is the leading authority on these subjects.

For a third presentation, I’ll (Aaron Murakami) be presenting on a topic with a few incredible demonstrations and Eric will be there for backup. This is based on some equipment that I am building that was engineered by Eric Dollard. Eric is the leading authority on this projects, not me, but I will do my best to do it justice and Eric will fill in the gaps. It’s been an amazing learning process and I’m looking forward to showing the demonstrations because it will blow some minds!

We need to start here with one very important and valuable piece of information… Paul Babcock is now dedicated to open-sourcing his life’s work in the electrical sciences. He wants to empower the masses with some very profound information that took millions of dollars to learn.

This presentation does indeed contain some weird things relating to overunity effects, but Paul actually shows you the specific waveforms his circuits created when demonstrating overnity. This has never been disclosed to the public before.

A lot of information relating to overunity principles have made it out to the public but in Paul’s opinion, it hasn’t really taken root yet in any substantial way. Many overunity effects are also like ghosts where they come and go so how can we pin it down?

There is definitely some kind of aether weather that influences the machines with its own rhythms where the overunity ebbs and flows – how do we reconcile all of this with conventional physics, which teaches us that these things can’t happen?

Our own perception limits our ability to comprehend these higher dimensional processes and on top of that, most of us are unable to solve problems in certain ways once we are used to solving problems in other ways.

It is important to understand that there are many commonalities throughout many machines that are overunity or in other words, they output more work than is required for us to input into them. Paul will spell these out in no uncertain terms – at least for the type of machines many of us have direct or second-hand experience with.

AIR GAPS – the air has important magnetic properties, which is the secret to many overunity machines and Paul will walk you through many details specifically related to this. Ed Gray, John Bedini and others used these principles that apply to the air and its interesting qualities. This specific information is worth its weight in gold even if this is the only thing you get from this presentation.

Paul will also cover some aspects to Dr. Harold Aspden’s work. This work overturns Einstein’s Relativity as commonly understood as does the work of other forward-thinking scientists. What is so important about Dr. Aspden’s work is that it is using nothing more than relatively simple algebra that describes, time, space and other concepts in simple ways that makes them make sense in a very practical way.

Space itself has “energetic” properties and this is a huge part of the picture that everyone should understand so their foundation has meaning when it comes to the “free energy” sciences.

Something else that is important besides air gaps and energetic properties of space is phase switching – going from electric to magnetic and back to electric. Again, it is necessary to restate the importance that these are commonalities that exist across many overunity machines.

Tesla was known for the ideas of separating the so-called electrons from the radiant energy component of electricity and Paul covers this as well. This presentation is simple enough that most people can understand the concepts even without a background in electrical engineering.

The aforementioned switching methods elicits anomolous TIME effects in batteries, hence the subtitle to this presentatin – IT’S ABOUT TIME – it has more than one meaning. Twenty years ago, John Bedini told me that the capacitors were receiving a TIME charge, but many people didn’t not understand how literal that was. Paul will be going into these concepts from his perspective, which carries a lot of weight. He’s done it with his own builds and he has seen others do it too.

Paul covers his experience with John Bedini’s “Glass Case Motor” and how batteries that were so dead they were corroding away – yet they ran the motor, produced mechanical work, lit LEDs and charged themselves up!

Ed Gray’s motor technology exploited some of these effects and again, Paul wil show you the waveforms that showed the overunity in his own circuits. his inverters showed 106% and his other circuits showed higher such as in his lighting circuits.

And, you will learn how there can be overunity when measuring less than 100%. Much of this comes from Jim Murray’s teachings of how to correctly account for everything happening in a system and when you understand this, you may realize that you too may have overunity but were never able to realize it. This information is very important because most people do not properly account for all the input, output and losses. It’s all about distinctions and this will be spelled out for you.

If you’re serious about overunity and achieving it, this is a must-have presentation that is sure to open your eyes.

In the last few years, Prof. Haralick became interested in subtle energy research but many of the experimental results were not explainable by the common paradigm. Some of his work in this area was presented at the last couple Energy Science & Technology Conferences.

It became apparent to him that there should be a theory that can begin to explain some of this unusual phenomena.

His interest was primarily focus on whether or not Maxwell’s Equations could be generalized so that it could be used to explain some of this work specifically including the type of work Tesla was involved with in the early 1900’s regarding longitudinal waves.

Prof. Haralick will walk you through a very specific sequence of segments that include:

James Clerk Maxwell – an interesting biographic sketch that quite likely, many mathematicians and engineers have not heard of.

The Maxwell Equations in Modern Form – a general review to set the stage for a comparison of the rest of the presentation.

Maxwell’s Original 20 Equations – this takes you back to the original 1865 paper that he had before he wrote his treatise. Prof. Haralick has a strong intent to figure out what was in those equations in the way that Maxwell wrote them because what many people have said is that what Maxwell had in his equations are not the same as what the Heaviside-Biggs Equations are that are currently used.

Quaternions – this goes into the quaternion algebra, which sounds complicated but if you have any background in the most basic high school algebrea, you’ll understand quite a bit of it.

Quaternion Generalized Maxwell Equations – you’ll then be walked through the derivation and this derivation admits to a longitudinal electric wave along with the scalar wave and this type of “scalar wave” will most likely shock you. So far this comprises a little less than half of the presentation.

Tesla, Galinas, Zimmerman, & Hively – the rest of the talk regarding the work of these men, what they built and what they wrote that is relevant to this kind of generalizaton as well as other related topics. Some of the material covered in this section may reveal to you some thing that you have not previously realized – especially regarding Tesla’s work.

Get a copy of this presentation so you can have an authoritative analysis of Maxwell’s Equations that reveals a very specific type of “scalar wave”, which not been openly discussed in any literature on the subject.

Jack Hanlon, Ph.D. believes over unity electrical machines have been built and even demonstrated many times at the ETSC and other places; however, he has never heard a complete explanation of “how they work” that will stand up to the skepticism of a conventionally trained mathematician, physicist or engineer.

The explanations always seem to involve some “mysterious” source of power or slightly nebulous use of magnetism.

The missing piece is always: what is the source of the extra power?

Since we have been unable to answer this question in a satisfactory way, the technology is put in the realm of “voodoo” science, and it is not seriously considered by the larger traditional scientific community.

He believes this holds back the wide spread and rapid development of this important technology and limits the developers to a small community of experimenters.

Switched reluctance generators have always been a prime candidate for overunity results. Eric Dollard who is very skeptical about any “free energy” claims was originally brought into Borderlands years ago to verify a switched reluctance generator built by Peter Lindemann and Michael Knox. Accounting for a sufficient margin of error, Eric Dollard found that it did indeed produce more work than it took to run the machine!

This is probably the most comprehensive analysis on where the free energy is in such machines and it is done in a relatively simple and eloquent manner with simple algebra and geometry.

If this technology is “real”, and he believes it is, then we should be able to give a solid and complete explanation for it based on traditional physics, mathematics and engineering principles.

You will get more than theory; you will get very specific examples of converting reactive power to real power by a former Los Alamos National Labs scientist and former university math teacher!

That is the goal of this presentation. Jack Hanlon thinks David Squires put it well in his 2012 ETSC conference presentation. He said: “You can’t engineer what you don’t fully understand”.

Here is the free viewing of the first Panel Discussion with Paul Babcock, Aaron Murakami, James DeMeo PhD, Robert Haralick PhD, Jack Hanlon PhD, & Eric Dollard.

There is a wide range of topics in this discussion with an emphasis on a living ether. Both Dr. DeMeo and Eric Dollard give some interesting insights into the Orgone energy and wait until you hear what Eric’s personal experience was with a small orgone accumulator. It needs to be replicated far and wide!

Eric Dollard’s description of the book: “Charles Proteus Steinmetz’s original math model is a natural outgrowth of Nikola Tesla’s polyphase power systems. Tesla was the discoverer, but Steinmetz was the builder who first applied Versor Algebra to the analysis of alternating current power systems.

In my presentation and book Four Quadrant Representation of Electricity, my extension of Steinmetz’s work is presented in the most simple way possible using very simple analogies, pictures and diagrams. It was a very difficult task as the goal was to facilitate an understanding for the layman.

That presentation was given at the 2013 Energy Science & Technology Conference and shortly thereafter, the book version was released, which went into more detail that was not covered in the presentation.

Tesla’s polyphase power system was originally four poles or four phases. Steinmetz is the one who adapted it into a three pole or three phase system, which is the prominent system of today. The complication is that three phase systems cannot be explained by conventional mathematics. With three phase systems, there is no plus or minus and that is the reason why the conventional math doesn’t work anymore.That left a big gap in polyphase power systems until Dr. Fortescue came up with the system of Symmetrical Coordinates. This laid the groundwork for polyphase mathematics for any number of phases. And ultimately, it can be extended into the Pythagorean understanding of numbers.The “Fortescue Method” was never fully developed because of its complexity.

The proper name for this is “Sequence Algebra” and the rudiments were presented in my presentation and book Four Quadrant Representation of Electricity.

Even though the system has become adopted for general engineering usage, Versor Algebra as Applied to Polyphase Power Systems and/or Versor Algebra Vol. II, Special Theories of Sequence Operators as Applied to Power Engineering is the first theoretical basis that has ever been presented on the subject.Versor Algebra as Applied to Polyphase Power Systems and/or Versor Algebra Vol. II, Special Theories of Sequence Operators as Applied to Power Engineering is the next logical step after Four Quandrant Representation of Electricity as it takes the reader into the mathematical journey of the mathematical model and theory that is necessary to realize the unique electrical waves that exist in polypahse power systems.

These waves are actually beyond the original understanding of Tesla and Steinmetz with regard to polyphase power systems.It is important to understand that this is all possible with simple 9th grade algebra. I take the reader through a step-by-step process from very basic algebra and log-rhythms into the more complex subject.

The process involves very simple but numerous steps to guide the reader into the understanding of polyphase mathematics.Through my own journey in writing this Versor Algebra book, I have been able to unify the polyphonic music of Bach and his contemporaries as this music follows the logic of sequence algebra perfectly.In fact, the book was written when listening to this music, which aided the process greatly.”