The Bourke Engine is the most important development in the field of gasoline-powered engines and it was invented back in the 1920s by Russell Bourke! With only 2 moving parts and a Scotch Yoke, which is the most effective way to turn reciprocating motion into rotary, it delivers more horsepower per pound than any other engine. Roger Richard is the world’s leading authority on this engine, he had 3 original 30 cubic inch Bourke Engines and one he had built, which under very special circumstances proved to have 85% thermal efficiency – that defeats the Carnot Limit.
At minimum, the Bourke Engine, under normal circumstances is easily 40% effiicient and that is being extremely conservative. A unit small enough to carry in one hand can power more than a 5kw generator.
Due to some health complications, Roger Richard was unable to present at the conference so he sent Sky Huddleston, his protege. Roger told me that Sky might even know more about the Bourke than he does and if so, that makes Sky the leading authority on this incredible engine. Sky delivered an incredible, knowledge-packed, 1 hour presentation and he had two original 30 cubic inch Bourke engines on hand. They were not running but one was assembled and one was partially disassembled so that everyone could see all the parts and how it was put together. Imagine an engine that the average person could rebuild in minutes rather than hours, literally!
We recommend getting the combo package so that you can get an authentic copy of the Bourke Engine Documentary, which is a book assembled by Lois Bourke, Russell Bourke’s wife. It’s a must read for anyone interested in the Bourke Engine, but also Engine science in general.
This is a must have presentation because the Tesla Turbine is one of the “low hanging fruits” when it comes to a technology that is the closest to fulfilling a sustainable energy generator that can power your home or business. With relatively low temperatures, you can have a turbine spinning 10’s of thousands of RPM turning a generator that supplies electricity. There are many variations and applications of the Tesla Turbine technology and the particular one that Jeremiah Ferwerda is focusing on is the “cyrophorus” method.
WATCH THE FREE PREVIEW VIDEO ON THE WEBSITE!
That means there is a hot and cold side to the turbine – the warm water tank boils water at a low temperature because a vacuum is applied to it, that steam drives the drive stage of the turbine and the other side is a vacuum side that pulls a vacuum through the drive stage all the way to the water to keep it boiling at a low temperature.
Solar electricity is about 20% efficient if you’re lucky but what most people don’t understand is that using the sun to heat water is much more efficient. So, with not much effort to heat some water with the sun, you’ll have a solar battery that runs a turbine at high speed making electricity – literally, the concept is as simple as that and for this particular application of the Tesla Turbine, Jeremiah is further ahead that anyone else developing more and more efficient methods with the cyrophorus method. Imagine a solar electric system that winds up being 40, 60, 80 or even close to 100% efficient!
In 2020, Jeremiah presented other aspects of the Tesla Turbine system but that presentation was never released because we were not able to include a demonstration. We’re also releasing this presentation at the same time so you can get either the 2020 1.5 hour presentation or the 2021 1 hour presentation with demo or both at a further discount.
Dr. James DeMeo is the leading authority on the work of Wilhelm Reich who is known for his studies relating to the life force, etheric energy known as Orgone. His replications of Reich’s work and independent discoveries have contributed greatly to this growing field that acknowledges that the ether is valid and quantifiable in terms of its existence.
Watch this preview:
At the last couple conferences, Dr. DeMeo presented Parts 1 and 2 of of Orgone Energy Experiments and also Cosmic Ether Exists, which are required study for an in-depth look at the real science that shows that ether exists, undeniably. Many “experts” claim that the ether has been disproved by the Michelson-Morley experiments in the late 1800’s but what they leave out is that Michelson himself actually had positive results and defended the ether till the end.
This presentation is a continuation of this train of thought along with other observations and experiments that will focus on three different approaches to the work of Reich and related.
A replication of TT Browns electrogravitics. Dr. DeMeo made his own 90 KVDC system, novel gravitor that moves around on a pivot at about 2 MPH.
Reich’s 12V KS 9154 Western Electric motor, a small 2-phase item working on eddy currents, he found that it works well at low power ~3 volts, very standard for this motor, with a take-apart pics.
Orgone charged high vacuum, slight electrical charges from them. Charging of capacitors to yield sl. higher voltage. Orgone charged GM Tubes, yielding anomalously very high CPM, verified Reich’s finding at his lab.
All are works in progress, the only real amazing thing is the high counts, up to 3000 to 4000 CPM in the OR charged GM tubes, at the max of the last sunspot cycle. Today at minima, only 300-400 CPM, background only. Without OR charging, maybe 2 CPM, specialized neutron counter.
The first presentation we’re releasing is for both the techie and the layman – there is the how-to on our method of creating these special Tesla Coils with unprecedented levels of magnification as well as a plenty of eye candy with some plasma demonstrations that nobody has ever seen – a few of them were even Eric Dollard’s first time seeing them when we were doing some experiments at our shop in Spokane.
When new presentations are released, we offer a discount code but you must be subscribed to Energy Times to receive it – in the left column of this website is a sign up form. To see if you missed any coupon code, check the last couple Energy Times in the archives here: https://archive.aweber.com/energytimes
Have you ever seen helium, argon, neon and other gases emit colors that are not associated with those colors? We already know the answer is no, but we’re going to show you various demonstrations that we can accomplish just that when exciting various tubes with the Tesla Resonant Transformer in the Cosmic Induction Generator mode. What kind of physics are we bending or defeating or making obsolete? What does that say for the predicted gases some stars are supposed to have by looking at the colors being emitted – maybe some electrical phenomena exists that are fooling our scientists? We already know the red shift model is false and the premise for the big bang theory is nonsense as Einstein’s Relativity is, but now this? We’re only proposing possibilities, but it is irrefutable that we can change the emitted spectrum of multiple gases when we subject it to our Counterspace node and you’re free to make up your own mind as to what is happening or what it means.
The picture at the top of this post is a demonstration of exactly that. It is “supposed to be” pinkish/purple. Interesting things happen when you place something at a point where it leads into the other dimension, literally, that is what we’re doing.
It’s important to understand, especially if you’re a Tesla enthusiast, that the primary and secondary coils should be avoided at all costs and although Tesla taught this, nobody appears to be putting this into practice and certainly not like what you’re seeing in this presentation. There are primary coils, secondary coils and then tertiary coils, which are the 3rd or “extra coils” and we’re only using the extra coils because that is what is doing all the work anyway. The full embodiment of our extra coils looks like a primary and secondary attached to each other but they’re not. The thick wire coil is where the current resides and the skinny wire coils is where the voltage potential resides and together, they are ONE coil.
You’ll also learn how to calculate the bandwidth and magnification factor for your Tesla coils and although some of this has been shared in some of the blog posts with videos on emediapress.com, this presentation gives you Eric’s full notes on the subject for all the calculations necessary for you to not only understand what we’re doing, but to replicate it as well. We’re only scratching the surface with what we can do with all of this!
If that is too technical for you, enjoy the demonstration part of the video and I’ve included 2 other videos that add an hour to the demonstrations, which were recorded both before AND after the conference. The first free bonus video shows the super amazing, Cosmic Induction Generator effect on a plasma tube from John Bedini’s private collection – a plasma show unlike anyone has ever seen – along with a few extra demonstrations that we recorded after the conference when Griffin Brock brought some bulbs from his collection to the shop including a few he made himself.
This is by far one of the most interesting demonstrations with some of the most important knowledge about Tesla’s Resonant Transformers and we even have a good time introducing the subject with some ideas and thoughts about what lies on the other side since that IS indeed what we are tapping into with the Cosmic Induction Generator. Have fun and enjoy your journey with us to the Outer Limits! 🙂
This new book is based on two reports written by Eric Dollard that was posted on his website for free. They are focusing on how the grid has degenerated in the digital age and how it has become susceptible to EMP attacks, which is a very real threat at this very time. This information is very important and should be considered vital to the security of the nation. A portion of the proceeds from this book go to EPD Laboratories, Inc., which is a 501(c)3 non profit corporation. It helps to support the work of Eric Dollard.
Presently, much discussion exists regarding the proliferation of harmonics in the electric utility system. Moreover, the susceptibility of this system to damage or destruction from a well-positioned nuclear E.M.P. is a subject of great concern. Such problems are not necessarily intrinsic to the process of electric transmission and distribution, but only present themselves when certain configurations exist within the electric utility system. Paramount in any transmission or distribution system is that such system must be a closed system, that is, the electromagnetic boundary condition must be maintained to the highest practical degree. This assures that the entry or exit of extraneous electric forces is minimized.
Presently, with regard to the electric utility system, the electromagnetic boundary condition is being violated in two ways: 1)By the ubiquitous employment of Wye to Wye connected transmission and distribution transformers, and related load configuration2)Through the extension of a common neutral connection throughout the entire electric utility system.
The widespread and enforced adoption of these practices has rendered the electric utility system an open system, or in other words, an antenna system, one of unprecedented proportions. The consequences must be obvious.It is the objective of the following series of engineering reports to re-establish a fundamental understanding of polyphase alternating current, and then apply this understanding to the analysis of the situation as it exists today with regard to the electric utility system.
In this Digital Age, the theoretical basis provided for Electrical Engineering has been defiled, reduced to an assemblage of delusive pronouncements enforced by a cabal of academic theoreticians. What gives authoritative force to their dictates is the overtly complex and convoluted mathematics which enshrouds them. This mathematics in turn becomes a “rite of passage” in teaching and replacing reason and experiment. Once the idols become digitized, they become law, and consequently electricity has become a lost science, relegated to the same scrap heap as alchemy.
However, in historical perspective, the theoretical basis for electrical engineering had achieved a very high level of development at the onset of the 20th century, this to meet the demands of a rapidly developing commercial enterprise, most notably that of the electro-magnetic telegraph and later electric light and power. Electrical science progressed remarkably well in this era, and thus became an exact science which engendered well thought out theories. The foundations of this science were derived from the Experimental Researches of Michael Faraday and their Mathematical Development by Clerk Maxwell. This became known as the “Faraday-Maxwell” Theory of Electricity.
There are quite a few improvements and upgrades we’ve been doing with the new store here at Emediapress.com and the most recent addition is that you can now purchase gift cards for your family and friends so they can get some of the authoritative books and videos on Free Energy, Tesla Sciences, and other related topics.
At the 2018 Energy Science & Technology, Jim Murray, a legend in the Tesla Sciences & Free Energy field presented on The Meaning of Unity in Energy Conversion Systems. This is one of the most important presentations given in this field simply for the fact that is explains an accurate accounting method so that the distinctions are made between system efficiency and conversion efficiency. The bottom line is that this shows how to properly compare the input to the output of a system, which is more complex than it initially appears.
Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.” However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft.
Therefore, it quickly became evident that not all the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized. What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts.
Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.”
The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses. During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.
Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well-established science of corporate book-keeping.
Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact.
Both efficiency concepts shall be fully explained in this book. Simply, this book serves as a definitive guide for those who wish to properly validate their input vs output claims. It also includes copies of one of the most significant and important patents in history in this field, The Dynaflux Alternator, which is Jim’s generator that has a reduced Lenz Law Effect meaning it has less drag than conventional science will admit is possible. There is also another related patent on Jim Murray’s Dynaflux Alternator, which gives a much wider picture. The Dyanflux was used as an example in the book so is not required to understand what it is about, but is valuable to know about.
At the 2016 Energy Science & Technology Conference, Janja Glogovac came to the conference to introduce herself, show their original trailer and to interview some of the presenters such as Eric Dollard, Jim Murray and others. It also happened to be on July 10, which was Tesla’s 160th birthday.
Here are a few pics of Janja and company at the conference interviewing some of the presenters:
We’ve been waiting eagerly for this documentary to come out and it has finally been released!
Check out the original trailer from 2016, which was shown at the 2016 ESTC here:
Here is a 2016 Wake Up trailer with Peter Lindemann, Paul Babcock, Jim Murray & Eric Dollard:
Check out the brand new trailer recently released:
Get the new DVD of Teslafy Me on Amazon here: Teslafy Me
Buy or Rent the HD version of Teslafy Me on Amazon streaming Prime here: Teslafy Me
Rent or Buy it streaming on Comcast/Xfinity: Teslafy Me
Having started my journey in light therapy around 20 years ago, I have seen a lot of technologies come and go. One astounding evolution is that the quality and power of LEDs (light emitting diodes) have increased substantially while the cost has gone down.
Because of this fact, one would think that light therapy devices would become more amazing and more affordable but instead, the devices have become more flashy with with ridiculous price increases.
This is obviously only made possible because these manufacturers are simply preying on the average person’s lack of knowledge about the modality in general and definitely their lack of knowledge about the technology itself.
In this presentation, it’s all laid out. We cover the general history of light therapy, how laser therapy evolved into LED therapy. Although laser therapy still exists, there are more reasons to use LEDs. We look at the origins of LEDs in light therapy devices. My personal mentors worked directly with the first man who ever used an LED for therapeutic purposes and you’ll learn the real history in this presentation.
Besides the history, you’ll learn about multiple, proven applications of red and infrared light therapy, which are all backed by published studies you can look up in PUBMED yourself. PUBMED is an archive of published medical papers under the National Institute of Health’s Library of Medicine.
You’ll learn the basic and simple to understand biological mechanisms at the cellular level of what happens when light is used on the body and specifically red and infrared. You’ll also learn why pulsed LEDs are better than steady red light and what frequency set has more history than virtually every other frequency set combined!
This presentaiton is very comprehensive and even if you’re familiar with red light therapy, you will most likely learn quite a bit about it that you have never heard of.
The presentation ends with some simple recommendations of DIY (Do It Yourself) methods to have the same benefits of light therapy devices that cost hundreds to thousands for around $50! Also, there are a lot of advertisements lately for red light devices that stimulate the growth of hair. The problem is that it costs around $1000 for something that really doesn’t cost a lot to manufacture. For under $50, you can get something that will be just as effective, which literally saves you nearly $1000!
There are countless applications for red and infrared light therapy from hair growth, reducing wrinkles, speeding the healing of wounds, relaxing tight muscles, improving mobility in joints and many others.
Get a copy of Red Light Power – it empowers you with a literal fortune’s worth of information while helping you to protect yourself from getting ripped off by unscrupulous companies who are preying on the fact that most people do not know what is in this presentation!
Last weekend I watched The Current War, which is about the battle between Edison’s desire to maintain and grow his DC power plant system and Tesla’s desire to give the world AC power at about 1/3 the cost.
I first heard of this movie last year and have been eagerly awaiting its release.
The movie was well done as far as the quality of production is concerned, the acting was good but they didn’t quite develop the story well enough to build up the excitement enough with Tesla’s triumph of lighting the 1893 World’s Fair in Chicago.
Nevertheless, it is a story that changed the world and is worth watching just for the history lesson. The story is also not ultra technical so even youngster’s can understand the gist of the story. It doesn’t get into Tesla’s more mysterious technologies, but Tesla’s character does mention briefly the transmission of electricity without wires and it was left at that.
Here’s the trailer:
Learn more about The Current War and where you can watch it: The Current War
One thing about the movie is that it doesn’t give a lot of context of where Tesla came from and more of his back story but there is a movie that is old enough that it’s free online that does a great job of giving you the larger story. It even has Orson Wells as JP Morgan – The Secret of Nikola Tesla. I’d recommend watching this old movie first and then The Current War second because you’ll have more of a frame of reference about everything referenced.
It’s got a bit of a dated, strange feel to it, but it’s definitely a must see. This version has subtitles, but at least its free. There is another version on YouTube that is a full version that doesn’t have subtitles but the audio and video aren’t perfectly in sync so this one seems to be the best edition.
Share this movie with your friends using the share links below!