Here is the third presentation by Jeremiah on Tesla’s favorite invention – the Tesla Turbine.
Last year, the hot tank was on the back of a trailer and it took a lot of space to setup everything up and it worked so-so.
This year, it out performed last year’s demonstration and it fit on a table top! Also, the vacuum box the turbine was inside of is gone and there was a much lower thermal differential. Last year’s cold tank was in an ice bath and this year, it was 85 degrees F!!
This is by far the most efficient Tesla Turbine demonstration for producing electricity based on a low thermal differential that anyone is showing – to our knowledge.
Building, operating, and optimizing a working Tesla Magnifying Transmitter (TMT) system for the maximum transfer of electric power with minimum loss, requires detailed measurement, tuning, and accurate generator and load matching. Measurement of such a TMT system in the frequency domain, using affordable yet sophisticated equipment such as a vector network analyzer (VNA), can reveal a wealth of important experimental data. Properly interpreted, this data can show how best to operate and tune the system, as well as revealing a deeper understanding of how these fascinating electrical systems work.
Network analysis is a vast and complex subject which has classically involved considerable training, an established background in electrical engineering, combined with very expensive equipment. The purpose of this presentation is to introduce this advanced measurement technique in a simple and practical fashion with equipment affordable to the individual researcher, experimenter, or inventor.
The presentation presented by Dr. Adrian Marsh, which includes a practical demonstration, is intended to lead the participant through the steps necessary to gain a working understanding of using a vector network analyzer, and to characterize the small signal impedance characteristics with frequency for a Tesla transformer, and hence for a complete working TMT system. The presentation includes the complete analysis of two different Tesla transformers. The first is the Golden-Ratio/Fractal Fern Discharge Coil, and the second is the Cylindrical Telluric Transference of Electric Power Coil.
The Tesla transformer used in the demonstration is the Golden-Ratio/Fractal Fern Discharge Coil, first analyzed using the VNA to reveal the AC small signal analysis, and then driven using a high-power 2.5kW Class-C Armstrong auto-tune power oscillator. This demonstration shows for the first time since Eric Dollard’s demonstration in the 1990s, the Golden-Ratio/Fractal Fern Discharge, showing the underlying natural order and organization of electricity, in this fascinating electrical phenomena.
The presentation and demonstration includes:
1. A philosophy of science type introduction to the why, how, and what of electrical measurement.
2. An introduction to the properties of Tesla coils, including resonance, coupling, tuning, and matching generators and loads.
3. An introduction to the principles of vector network analysis.
4. Taking a look at equipment suited to this measurement technique both at the high-end, and the affordable end, with a comparison of the range of measurements available from both, and the likely accuracy and limitations which they present.
5. How to calibrate, setup, and prepare a network analyzer to measure a Tesla coil.
6. How to make impedance measurements over a frequency band, and interpret the meaning of the measured results.
7. Impedance measurement comparison under different operating conditions, including the effects of coupling, primary, secondary, and extra coil tuning, and loading.
8. How to identify the best points of operation from the measurements, and then optimize the system for the maximum transference of electric power.
9. How to match a generator to a Tesla coil using the measured impedance characteristics.
10. A live measurement demonstration using the Golden-Ratio/Fractal Fern Discharge coil connected to a portable and affordable vector network analyzer.
11. A Tesla transformer discharge demonstration using the VNA measured coil to show the Golden-Ratio/Fractal Fern Discharge electrical phenomena for the first time since Eric Dollard in the 1990s. The coil causes a lot of interference with the sound equipment so the demonstration is also included as a separate mp4 file with cleaned audio.
“With all the Dollard and related Tesla Coil related presentations, my first question to Hakasays was, “What makes this any different?” Actually, it’s a bit more refined than what Dollard showed in the past and Dollard even agrees since he’s been working closely with Griffin and Hakasays on these projects.” – Aaron Murakami
Build a Tesla Coil (the way Tesla built them) is meant to serve as a crash-course into simple, practical Tesla Coil design and construction.
We’ll be touching on a some of the differences between ‘modern’ Tesla Coils and the coils that Tesla build, and why the coils today look so different from the ones Tesla photographed in Colorado Springs.
According to Wikipedia, a ‘Tesla Coil’ requires two or three coils, but most of the coils we’re working with only have one. No primary. No secondary. Just a single Extra coil is all that is needed to achieve even great effects. Eric Dollard demonstrated this himself with his Cosmic Induction Generator experiments at the 2021 ESTC conference.
The coils we will be working with are in-fact quite a bit simpler than the plans you will find on the Internet. You don’t need high voltage transformers or expensive measuring equipment to build coils. With luck, you might even be able to light full florescent bulbs from several feet away using only a couple watts.
Through experimentation we’ve also refined Eric Dollard’s coil calculator formulas, and compiled them together into a simple online calculator, so new builders can predict with great accuracy how their coils might perform before they even build them.
Last year at the conference, Eric Dollard and I presented on The Borderlands of Nikola Tesla’s Resonant Transformer, which included some basic plasma bulb tests in the Cosmic Induction Generator.
We have some other upcoming experiments but short term, we experimented with a few other Tesla style Brush Bulbs – some results we have seen and some we have not.
The vid is a bit long for what is shown because it’s mostly unedited so watch the whole thing or just skip to the different illumination demos.
We’re not sure how much time we’ll have to upscale all of this equipment to have a part 2 of this presentation this year but we’ll do what we can. All in person tickets to our conference are sold out but we have some live streaming tickets if you want to tune in remotely:
Special thanks to Simon Davies aka dR-Green (on Energetic Forum) for creating a simple, user-friendly calculator on the new RPX website. Everyone can instantly see what audio frequency needs to be mixed with the 3.1 MHz carrier in order to create sidebands that are rich in harmonics for ANY frequency they want.
Simon has been replicating much of Tesla and Dollard’s work over the years and his calculators are accurate so if you want to know how to calculate windings and other parameters for your experiments, he has both free and paid calculators available at: Tesla Scientific
Here’s an example of how you can use this calculator and the RPX as a 432 Hz harmonic generator, which nobody else is doing.
You take the carrier of 3.1 Mhz and divide it by 432 = 7175.93
Round up or down to the nearest whole number = 7176
Multiply your desired frequency of 432 x 7176 the multiplier = 3.100032 Mhz sideband that will be created
The difference between the sideband and carrier is 32 Hz
Therefore, if you use an external signal generator with the RPX and you input a sinewave limited to 2 volts with a frequency of 32 Hz, it will create a sideband of 3.100032 MHz, which is a multiple of 432 Hz and it will have a whole lot of harmonics of that frequency.
This can obviously be done with any desired frequency – why not use Rife’s brilliant method to create frequencies for your frequency needs? Everyone else is just focusing on the fundamental frequency but are completely ignoring the fact that the real power comes from all the harmonics.
Go to the calculator here, enter the desired frequency and hit return. You’ll instantly get the audio frequency needed to be input into the RPX to do the above: https://emediapress.com/rpx3#resources
There is a lot of propaganda/misinformation online regarding Longitudinal wave transmission, false claims about “scalar waves”, which don’t even exist and other nonsense.
TRANSVERSE & LONGITUDINAL ELECTRIC WAVES AND TESLA’S LONGITUDINAL ELECTRICITY
These classic FREE videos will address most of what everyone is looking for. It’s a bit dated, but the information is accurate and is able to be reproduced.
These videos have more real info on Tesla’s longitudinal waves than most of the nonsense online combined.
Transverse waves are almost at light speed moving through the air and conform to the inverse square law – it diminishes by the square of the distance. Energy is dissipated 90 degrees to the direction that these waves are propagating. They are no X times light speed as this group’s ABOUT us section claims.
Longitudinal waves are EXTRALUMINAL – not faster than the speed of light like the propagandists want to teach. Longitudinal waves move through counterspace and have no velocity so they aren’t “faster”, there is no time between point A and point B. It requires traveling through space in order to travel a length of time/distance and this is not the case with Longitudinal waves. These waves also do NOT conform to the inverse square law.
Every AM radio station transmits in BOTH modes simultaneously. They transmitter transverse electromagnetic waves through space. Through their massive ground systems, they transmit longitudinal waves as well.
These videos are a must see for anyone that wants to learn the truth from Eric Dollard who is the world’s leading authority on this subject.
Then, I’d recommend his book/presentation on the Crystal Radio Initiative that teaches how to make a Tesla style crystal radio that is powered from the longitudinal ground transmission from AM radio stations. But that’s another topics although related.
Griffin Brock is obviously destined to become one of the foremost experts of pure Tesla technology and he is demonstrating it in spades – at 17 years old, that is quite an accomplishment. He presented last year on 3-Phase Electrical Systems and his replication of some of the seismic detection methods related to Eric Dollard’s work. This year, he stunned everyone with two amazing presentations – one on some of Tesla’s methods of illuminating various bulbs and another on stimulating plants with high voltage.
This one being released is a developed explanation on the practicality of high frequency high potential illumination devices, as originally developed by Tesla. This includes the employment of various high potential driving apparatuses, and the construction of illuminating devices with peculiar phenomena. Griffin Brock, a prolific experimenter who also happens to be under Eric Dollard’s tutelage, is performing many experiments that many seasoned electrical engineers have not been able to accomplish.
As presented, multiple demonstrations and apparatuses gave insight to the functions and practicality of certain high frequency vacuum devices, as pioneered by Nikola Tesla. Most notably, his wireless brush discharge lamps, as historically replicated by hand, as well as other lamps possessing electrodes within them. The demonstration included a high potential tube based power source, which supplied special potential coils to provide an intense surrounding field for wireless illumination.
The bulbs shown in the demonstration were built with historical accuracy, that being, they do not possess any gases within. Ultimately giving forth luminous phenomena which should not occur within a vacuum. Especially for Tesla’s Brush Bulb, as demonstrated, which is devoid of matter, but nevertheless radiates large quantities of light. It should be noted that the replicated bulbs presented before the audience, were the first to be seen in historical accuracy, not witnessed in over 130 years.
Throughout the presentation, references and detail to other vacuum tubes as developed by Tesla were given, as well as a physical representation of such tubes when placed in a “null” zone state of activity, as produced by the coil setup.
A developed explanation on the practicality of high frequency high potential illumination devices, as originally developed by Tesla. This includes the employment of various high potential driving apparatuses, and the construction of illuminating devices with peculiar phenomena. Griffin Brock, a prolific experimenter who also happens to be under Eric Dollard’s tutelage, is performing many experiments that many seasoned electrical engineers have not been able to accomplish.
As presented, multiple demonstrations and apparatuses gave insight to the functions and practicality of certain high frequency vacuum devices, as pioneered by Nikola Tesla. Most notably, his wireless brush discharge lamps, as historically replicated by hand, as well as other lamps possessing electrodes within them. The demonstration included a high potential tube based power source, which supplied special potential coils to provide an intense surrounding field for wireless illumination.
The bulbs shown in the demonstration were built with historical accuracy, that being, they do not possess any gases within. Ultimately giving forth luminous phenomena which should not occur within a vacuum. Especially for Tesla’s Brush Bulb, as demonstrated, which is devoid of matter, but nevertheless radiates large quantities of light. It should be noted that the replicated bulbs presented before the audience, were the first to be seen in historical accuracy, not witnessed in over 130 years.
Throughout the presentation, references and detail to other vacuum tubes as developed by Tesla were given, as well as a physical representation of such tubes when placed in a “null” zone state of activity, as produced by the coil setup.
Part of the 2021 Energy Science & Technology Conference series (100 mins downloadable video).
2021 Preview
2022
As first presented by Griffin at the 2021 Energy Science & Technology Conference, a definitive exploration on specific high vacuum devices as pioneered by Nikola Tesla was given. This presentation covered the construction and operation of different bulb types including but not limited to, the carbon button lamp, the brush bulb, and single wire x-ray/shadowgraph tube. Explanation was provided as to the purpose of these high vacuum lamps, including some interesting phenomena observed by Tesla himself, incorporated with carried out experiments conducted on stage.
This year, a new approach was taken in demonstrating the effects as observed by Tesla, whereby more sophisticated glass equipment and high frequency supplying apparatuses were employed. The first course of the lecture covered historical background information, on Tesla’s very intent of researching such high frequency-high vacua phenomena. Expounding upon the experience he put forth during his 1892 lecture, the presentation then digressed to showcase custom glass apparatus suited for the demonstration. With related experiments conducted prior to and after the scheduled lecture, cosmic phenomena possessing dynamic plasma states of complex rotation and natural form were observed.
Despite many challenges encountered in the fulfilment of this research and very presentation, a plethora of video and photographic documentation was made possible, allowing for it to be adhered to and preserved.
This 2022 presentation package includes a nearly 2 hour presentation but also a BONUS video, which is a compilation of demonstrations of a carbon button bulb that is 37 minutes long.
