In Dr. Hanlon’s last two brief videos, he introduced you to the concept of Geometric Algebra and then gave an introduction to Complex Numbers. In this video, he will give a more comprehensive, but still brief overview of Geometric Algebra.
It is highly recommended to study this video and his other two (all in order) in order to get the most out of his presentation THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS at the 2019 Energy Science & Technology Conference.
This is a quick 3 minute heads up on what Dr. Jack Hanlon’s presentation at the 2019 Energy Science & Technology Conference will be about. His presentation is called: THE SECRET POWER SOURCE FOR OVER UNITY SWITCHED RELUCTANCE GENERATORS
Keep in mind that Dr. Hanlon is working on a new video that I’ll post on YouTube that will be narrated with a walk through on some of the basics to orient you his upcoming presentation, which is game-changing and revolutionary!
Share this with you friends using the share buttons below. Also, join Energy Times at the top right of this page for a lot of freebies and other exclusive information.
It is an honor to have Dr. James DeMeo present at our Energy Science & Technology Conference this year. His contributions are too vast to mention in one post, but suffice to say, he is one of the leading authorities if not the top expert on Reichian Orgonomy and the history of interferometer experiments that positively show there is an aether. If there was one reference that I have sent out and recommended over and over throughout the years that really stands out, it would be Dr. DeMeo’s website that discusses Dayton Miller’s interferometer experiments along with what Einstein actually said about it. To make a long story short, because of Miller’s experiments, Einstein had zero confidence in anything he believed in and this is on record.
His presentations at the 2019 ESTC are game-changers and there are only 46 seats remaining. Register and get your tickets while you can: Energy Conference
James DeMeo, PhD, is Director of the Orgone Biophysical Research Laboratory, a high-altitude research facility in the Siskiyou Mountains near to Ashland, Oregon, exhibiting optimal conditions for sensitive orgone energy experiments. He formerly served on the faculty of Geography at the University of Kansas, Illinois State University, University of Miami and University of Northern Iowa, presenting courses on Earth, Atmospheric and Environmental Science. He was the first to undertake natural scientific research in a mainstream university investigating Wilhelm Reich’s controversial discoveries, subjecting those ideas to rigorous testing, with positive verification of the original findings. His published works include dozens of articles, compendiums and books, such as The Orgone Accumulator Handbook, In Defense of Wilhelm Reich, and Saharasia. He was editor of the compendiums On Wilhelm Reich and Orgonomy and Heretics’ Notebook, and of the journal Pulse of the Planet, and co-editor for the German-language compendium Nach Reich: Neue Forschung zur Orgonomie.
At this year’s 2019 ESTC, Dr. DeMeo will be delivering the keynote presentation: COSMIC ETHER EXISTS: CORRECTING A MAJOR ERROR IN MODERN SCIENCE – This presentation covers the historical ether-drift experiments, how even Michelson-Morley got positive results, as did others (ie, Dayton Miller), and how those findings were defeated politically, but never scientifically, mostly by the followers of Einstein. I have a book in preparation on this subject. The Miller-type of motional entrained material ether is quite similar to Reich’s orgone energy.
This is the perfect presentation to set the stage for this year’s conference since there will be a heavy focus on the aether. Also, another presenter will be demonstrating an interferometer experiment that everyone needs to see in order to believe it.
Dr. DeMeo will also be giving a second presentation: THE ORGONE ENERGY ACCUMULATOR: EXPERIMENTAL CONFIRMATIONS AND NEW WATER-STRUCTURING EVIDENCE – This presentation covers Dr. DeMeo’s recently published research on orgone-charged water. He will also discuss Reich’s discovery of the orgone and the best orgone accumulator constructions — there is so much misinformation on that issue, falsehoods created by the advocates of the “orgonite” and “orgone generator” devices. New findings on water research will be presented.
Every Energy Science & Technology Conference is a once-in-a-lifetime opportunity and this year is no exception! His presentations at the 2019 ESTC are game-changers and there are only 46 seats remaining. Register and get your tickets while you can: Energy Conference
It is highly recommended to get these two books for study before coming to the conference but not required – in either case, these are required for any seeker’s library:
The Orgone Accumulator Handbook
The Orgone Accumulator Handbook: In the 1940s, the physician and natural scientist Dr. Wilhelm Reich claimed discovery of a new form of energy which charged up living organisms and also existed in the open atmosphere and in high vacuum. Reich’s laboratory and clinical findings indicated this new energy, which he called the orgone, could be photographed and measured, and had powerful life-positive biological effects. Reich trained other scientists and physicians in his findings, and together they set about applying the inexpensive orgone treatment methods – using a device called the orgone energy accumulator – against various illness, including cancer, with remarkably good results. His published findings shocked the scientific world of his day, however, ultimately leading to numerous smear articles in the popular press, and trumped-up charges by a power-drunk Food and Drug Administration. The FDA & “investigation” lead to a court trial of much greater significance than the better-known “Scopes Monkey Trial”. Ignoring Reich’s evidence and declaring “the orgone energy does not exist”, US Courts ordered all books on the orgone subject to be literally banned and burned. Reich was thrown into prison, where he died. His work was nearly forgotten except by a small group of supporters. In this book, former university professor Dr. James DeMeo examines Reich’s evidence and reports on his own observations and laboratory experiments, which have repeatedly confirmed the reality of the orgone phenomenon. Dr. DeMeo also recounts the observations and experiments of others, particularly physicians working in private European clinics where open use of Reich’s controversial orgone energy accumulator proceeds today. This Handbook gives a warning about low-level atomic and electromagnetic radiations, as from nuclear power plants, power-line fields and cell-phones, along with advice on measurement and protection against such toxic energy. The book also gives a discussion on the subject of healing waters from natural hot springs, a form of energy medicine which once was widely used in North America before the rise of the authoritarian MD-hospital system and the powerful federal bureaucracy of the FDA. Dr. DeMeo also gives detailed construction plans for people to build their own orgone energy blankets and accumulators, which are inexpensive and simple to construct, though requiring specific direction as to their materials and environments. This is the Third Revised and Expanded 2010 Edition of the Orgone Accumulator Handbook, nearly 100 pages larger than prior editions and carrying a Foreword by Dr. Eva Reich (the daughter of Dr. Wilhelm Reich), along with many photos, diagrams and charts. It retains all the original construction plans, updated to address new issues about the best materials for orgone accumulator and blanket construction. Two Appendix documents are also included, one which summarizes a double-blind and controlled clinical experiment proving the physiological effects of the orgone accumulator on volunteer subjects in a German university, and another which details the similarities of Reich’s orgone energy to the cosmic ether and “dark matter” of modern physics. This new edition also includes a section providing New Evidence on the Persecution of Reich, along with a bibliography, index and many weblinks for added information. It has many new photos and materials extracted from Dr. DeMeo’s publications verifying the reality of the orgone energy, and is a must-have for all those interested in the issue of life-energy, subtle-energy or energy-medicine research. This is an excellent introduction to a major scientific discovery, organized for the educated layperson but with sufficient detail and citations to stimulate the curiosity of the open-minded physician and scientist.
Heretic’s Notebook: Emotions, Protocells, Ether-Drift and Cosmic Life-Energy, with New Research Supporting Wilhelm Reich
Heretic’s Notebook: Emotions, Protocells, Ether-Drift and Cosmic Life-Energy, with New Research Supporting Wilhelm Reich: A compendium of 30 different research articles, by an international group of 18 different scientists and scholars, validating and expanding upon the subject of Wilhelm Reich’s amazing discoveries and related concepts. The fifth issue of the ongoing series, Pulse of the Planet, presents new research in the fields of biogenesis and experimental orgone biophysics, with insightful essays and research articles on a truly amazing range of subjects: On natural childbirth, sexuality, archaeological evidence on early human violence, Reich’s orgonomic functionalism, exposes on Reich’s detractors, Giordano Bruno’s work, protocells and bion-biogenesis research, a fresh look at Dayton Miller’s ether-drift discoveries, emotional effects in REG (psychokinesis) experiments, new methods for detection of orgone energy, dowsing research, orgone energy effects in low-level radiation, cloudbusting experiments in Africa, plant growth stimulation in the orgone accumulator, several papers on the orgone energy motor with a discussion on the implications of “free energy”, plus UFO research, book reviews, and much more, with many striking photos and illustrations.
Please let your friends know about the work of James DeMeo, Ph.D. with the share buttons below. His presentations at the 2019 ESTC are game-changers and there are only 46 seats remaining. Register and get your tickets while you can: Energy Conference
A university project created a cooling system that creates about 600% more work than it takes to run the system using memory metal.
In this brief article, you’ll learn how something can easily produce way more work than it takes to run it and there are no violations of physics.
Electric heating element heaters are energy hogs for the heat they produce but regardless, they are 100% efficient already. And there is nothing magical or special about a 100% efficient heating system.
Why? Because nichrome or other heating element wire is thought to dissipate or waste all the electrical current that runs through it. That is not even close to being the reality, but that is what conventional science believes so we’ll just entertain that for the purposes of this article and to keep it simple. Normally, heat is considered waste in non-heat systems but if you power a heating element and it “wastes” all the electricity, then it is 100% efficient since the desired work is the heat.
Efficiency is a funny subject because as absolute as it sounds, it is really an objective measurement because efficiency changes depending on your perspective of what kind of work you want.
An incandescent bulb is considered 10% efficient since the desired work is light while 90% of the energy is “wasted” in heat. However, if we want to use those bulbs as heaters, then magically, they would be considered 90% efficient, with 10% wasted as light. But if you want some heat AND light, then the bulb is also magically considered 100% efficient since 100% of what you are using to power the bulb is creating both power and light.
Heat pumps create hundreds of percent more heat/cooling than the electricity required to run them – geothermal, refrigerators, air conditioners, air source heat pump dryers and water heaters, etc. yet, they are less efficient than heating element heaters.
Efficiency is a ratio of TOTAL input to TOTAL output. The heating element produces as much heat as the wattage is provided. It is 100% efficient.
But there is another measurement, COP or Coefficient of Performance, which is the ratio of ONLY WHAT WE PROVIDE on the input compared to the TOTAL output. With a heating element, we provide all the input so total output divided by our input will equal 1.0 or COP of 1.0.
With heat pumps, the story is very different. If it takes 200 watts of electricity to run a compressor to circulate a refrigerant through compressions and expansions cycles (that creates high and low potentials in the system), heat moves for free towards a colder area so the total amount of heat moved in a heat pump can easily be 300, 400, 500, or 600 watts worth of work in an electrical equivalent – for only paying 200 at the wall.
If you put in 200 but you get 600 watts of heat movement, the total desired work is 600 watts worth divided by only your input (not counting free environmental contribution) of 200 watts = 3.0 or COP of 3.0. That is a 300% NET GAIN in total energy (work) produced compared to what you have to pay for. But if you look at all input including environmental input, it will be under 100% since there are losses. That is how you can have a system that produced hundreds of percent more work compared to what you pay for although it will still be 100% efficient of less.
The cooling system methodology created by a team led by Professors Stefan Seelecke and Andreas Schütze at Saarland University is technically not new in concept, but it is the best example of taking advantage of an interesting memory metal called Nitinol and it’s known effects of soaking up heat while it gets bent and releasing the heat when it straightens out.
The cooling system is made of a cylindrical chamber with a rotor that has nitinol metal strings running along the length. There is a cam system that flexes the wire as it rotates for 1/2 the revolution. During this 1/2, the wires soak up heat in that compartment, which cools the compartment down. When the wires goes into the other side of the chamber, they are allowed to straighten up and they release a lot of heat, which heats up that compartment.
There is air moving through the devices to move both the hot and cold air. The claims from the university is that it is about twice as efficient as a heat pump. As you know from the examples above that a heat pump could have a COP of 2.0 or 3.0 easily. That means that this new Nitinol cooling device would have a COP of 4.0-6.0 or 400-600% more work done than the motor takes to rotate the cylinder!
To learn how open systems are permissible by the laws of physics and that systems CAN and DO produce more work than it requires from the operator by getting these two presentations:
Ernst Willem van den Bergh is a member at Energetic Forum who has shared some of his work in the Tesla sciences. Here is the thread that prompted me to get a copy for Eric Dollard and myself: Tesla’s Rays
When recently talking to Eric about this book, he indicated that Ernst has shown two very specific things that he believes nobody else has shown. Eric may discuss these two items on his next live call coming up on March 17th.
Here is a description of this book that any Tesla fan should get in their hands:
“This book is the result of more than a decade of theoretical and experimental research. It sets out to answer questions about Tesla’s Magnifying Transmitter. What is it? What does it do? How does it do so? Does it really provide free energy? These questions and more you will find answered in this comprehensive book. Every fact you will see backed by Tesla’s own words. Quotes of all relevant articles, lectures and patents have been included. More than that you will read about my own experiments, copies of Tesla’s and their results. This book is divided into 3 parts and every part concludes with a summary in layman’s terms so that everyone can understand what it is that Tesla wanted to give the world and how it was intended to work. Needless to say that this book is a must-read for every Tesla enthusiast and everyone who wants to understand the work of Nikola Tesla, a genius far ahead of his time. With the purchase of this book you are supporting my work to bring back Tesla’s Magnifying Transmitter, and for that I thank you!” – Ernst
“Born 1964 in Amsterdam. I always wanted to figure out how things work. I was repairing all things electronic in my teens, taught myself digital electronics and designed and built my first computer when I was 18. I went to University to study computer science and physics and worked in IT until 2005. Then I moved to Thailand and while looking for a new hobby I came across Tesla. I have collected all his works (as much as available) and started replicating his experiments so I would see what he must have seen.
In 2014 the voltages became too high for living room experiments and together with an ex-colleague we started Ethergy Co. Ltd. to attract funds for a lab and equipment.
We have since proven, among many smaller things, the 11.77 Hz Earth resonance frequency and that Tesla’s Magnifier generated extra current. So far we have not been able to produce excess energy, but I think that is just a matter of time.“
Please use the share buttons below to help share this with your friends. Ernst deserves to have his work recognized and we are fortunate that he is willing to share it with us!
At the 2019 Energy Science & Technology Conference, Geoffrey Miller will be presenting on a massive Newman Motor that he recently built. He’ll also be disclosing a very * RARE * device invented by Joseph Newman that most Newman fans have never heard of. There will be a demo of this device and all details necessary to replicate it will given!
There are only 150 seats available for the 2019 Energy Science & Technology Conference and they’re going to be sold out months before the conference – register and get your tickets now: 2019 Energy Conference
LOOK AT THE SIZE OF THAT ROTOR!!
Here are the details: NEWMAN’S 10,000 LBS MOTOR IN 2019 & DEMONSTRATION AND EXCLUSIVE FULL DISCLOSURE OF RARE NEWMAN DEVICE – The 2019 talk will be on the NEW 10,000 lbs Joseph Newman Motor built by Geoffrey S. Miller at Energybat Labs. In 2017, he gave a talk about the Newman Motor and a small demo of the motor. This year, Geoffrey Miller will go into a whole new level with the new 10,000 lbs motor. The talk outline is below.
1. History of Newman’s big motors. 2. Who maid the new 10,000 lb. motor 3. Why make a 10,000 lb. motor? 4. What it takes to make a motor this size. 5. What the motor will do. 6. All parts of the motor. 7. All motor data. 8. Power in & Power out. 9. Motor running parts of the lab. 10. Videos of the motor running. 11. Hand out data. 12. Q & A session. 13. A live demo will follow the talk about a Newman device.
It is recommended that you get a copy of Geoffrey Miller’s presentation from the 2017 Energy Science & Technology Conference, which will lay the foundation for the upcoming talk: NEWMAN MOTOR DISCLOSURE
TeslaStarter, the crowdfunding platform developed by Teslacoin team is focused on funding ‘Free Energy’ projects, it has finally been launched and is ready to start receiving ‘Free Energy’ project propositions. The objective of the platform is to accelerate the transition to a sustainable energy system by funding the research and development of independent inventors.
Teslacoin is the cryptocurrency based on the new blockchain technology birthed as an ode to the often forgotten genius Nikola Tesla. The only objective of the currency born 4 years ago is to help the Free Energy inventors and to achieve that goal they have created TeslaStarter.
“TeslaStarter will go through different phases the first one being crowdfunding worthwhile research”, said Matt from Teslacoin team.
Since the project is in an embryonic state they expect to receive thousands of projects that will be reviewed by Teslacoin team, and the committee that will be composed of Free Energy experts.
“Once the research starts moving forward in big steps and we start seeing working prototypes of products that clearly reduce the cost of producing energy, we do expect to start receiving propositions from teams willing to raise money to start producing the new product in mass scale”, commented Rw from the team.
It’s time to make the world a better place. It’s time that the 4 billion people still without access to electricity still using fuels like wood, charcoal, coal and dung for cooking and heating have access to a cleaner and more effective energy source. It’s time for an environmental clean source of energy.
It’s time for a breakthrough in the energy field. It’s time for Free Energy.
Here is the first of several interviews that were recorded at the 2017 ESTC. The 2018 ESTC has already passed, but they’re still worth watching. Karen Elkins of Science to Sage Magazine interviewed James and Valerie Robitaille of the QEG family.
The Self-Recharging Battery Supply of Carlos F. Benitez by Peter Lindemann, D.Sc.
NOTE: This machine was demonstrated at the 2018 Energy Science & Technology Conference (ESTC) but there was no formal presentation. It was only explained to attendees who were interested enough to ask Peter Lindemann questions about it back in the vendor/demo room. This machine is a very small powered demonstration, but proves the point and kept itself charged up all weekend while running a motor/generator. This EXACT circuit from 100 years ago is the foundation for several well-known circuits that have been taught by John Bedini and others over the years – you are being handed the origin of where much of it came from.
Between 1915 and 1918, Carlos F. Benitez was issued 4 British Patents on a “System for the Generation of Electric Currents.” It was the early days of the “electrical era” and many experimenters were claiming new ways to produce useful electrical effects. But this was different. Benitez was claiming to be able to run light bulbs and motors from batteries that never needed to be re-charged from a conventional, external source.
By this time, the Laws of Thermodynamics had become widely taught, and so most electrical engineers did not take these claims seriously. Even today, 99% of scientists and engineers believe this is impossible, under any circumstances.
Here’s why: Classic electrical theory assumes that when a load is operated in the manner shown here, the load RL receives ½ of the power provided by the 12 volt supply, and the 6 volt battery wired in reverse receives the other half as a charging effect. Since the battery being charged only receives ½ of the energy supplied by the source, rotating the batteries back and forth runs them all down in a conventional manner.
So, it is curious to find this quote in one of Benitez’s Patents:
“Obviously the current furnished by the discharge of battery 1-2 alone, would produce a smaller charge in batteries 3-4, if some extra energy were not added to the normal output of said battery 1-2. With this object in view any of the known methods for the generation of high frequency currents, as well as those described in the aforementioned English Patents, can be employed in conjunction with said batteries, in order to provide that complementary energy, and in this manner it is always possible to charge and discharge alternately each battery from one to the other, maintaining constant a storage of electricity and producing furthermore an excess of electrical energy.”
On the Patents, Benitez is referred to as a civil engineer, living in Guadalajara, Mexico. So, while he may not have been earning his living in the electrical sciences, he certainly was familiar with both classic electrical theory and the benefits of his discoveries!
For any honest student, the questions become: Was Benitez mistaken, or did he discover something important? And if so, HOW is this possible??
Benitez was issued 4 Patents, and each one describes a different circuitry and method to accomplish the objects of the invention, which included running external loads AND returning the electrical source to its initial state of charge simultaneously. Since there was no dispute about how much energy was being dissipated by running the loads, the following conclusion may be drawn:
Benitez discovered that it was possible to return a battery to a higher energy state with fewer watt-hours delivered to it than classic electrical theory would predict, as long as that energy was applied to the battery under the correct conditions and in the proper manner.
Today, we would describe this as the ability to charge a battery at a COP > 1.
As John Bedini always said, the “gain” showed up in the battery. The circuits themselves always operated at an efficiency below 100%.
If we assume that in the circuits that had two banks of batteries in them, the charging batteries were receiving about ½ of the energy provided by the run batteries, then the circuitry had to overcome the loss of running the loads and the loss of running the circuitry itself. In this instance, the system would have to be able to produce a charging effect in the receiving batteries equal to 2.2 times the watt-hours provided, or a charging COP > 2.2 for the system to self-sustain indefinitely.
So, the GOAL for an operating system is to attain a battery charging efficiency with a COP > 2.2!
That said, there are other ways to accomplish the goals of the invention, but “super-efficient” battery charging is definitely one of the ways. For students familiar with the work of John Bedini, this method is the best documented and published on, as well.
NOTE: This presentation gives you the EXACT schematic to replicate Peter Lindemann’s circuit that he demonstrated at the 2018 ESTC, operating theory, supporting diagrams and complete explanations of how to operate it. Also, there are multiple URL shortcuts inside the zip file that are highly relevant to this technology. Some are to other presentations and some are to specific discussions at Energetic Forum.
In Dr. Hanlon’s last two brief videos, he introduced you to the concept of Geometric Algebra and then gave an introduction to Complex Numbers. In this video, he will give a more comprehensive, but still brief overview of Geometric Algebra.
A university project created a cooling system that creates about 600% more work than it takes to run the system using memory metal.
Ernst Willem van den Bergh is a member at Energetic Forum who has shared some of his work in the Tesla sciences. Here is the thread that prompted me to get a copy for Eric Dollard and myself: 
“This book is the result of more than a decade of theoretical and experimental research. It sets out to answer questions about Tesla’s Magnifying Transmitter. What is it? What does it do? How does it do so? Does it really provide free energy? These questions and more you will find answered in this comprehensive book. Every fact you will see backed by Tesla’s own words. Quotes of all relevant articles, lectures and patents have been included. More than that you will read about my own experiments, copies of Tesla’s and their results. This book is divided into 3 parts and every part concludes with a summary in layman’s terms so that everyone can understand what it is that Tesla wanted to give the world and how it was intended to work. Needless to say that this book is a must-read for every Tesla enthusiast and everyone who wants to understand the work of Nikola Tesla, a genius far ahead of his time. With the purchase of this book you are supporting my work to bring back Tesla’s Magnifying Transmitter, and for that I thank you!” – Ernst
At the 2019 Energy Science & Technology Conference, Geoffrey Miller will be presenting on a massive Newman Motor that he recently built. He’ll also be disclosing a very * RARE * device invented by Joseph Newman that most Newman fans have never heard of. There will be a demo of this device and all details necessary to replicate it will given!
By this time, the Laws of Thermodynamics had become widely taught, and so most electrical engineers did not take these claims seriously. Even today, 99% of scientists and engineers believe this is impossible, under any circumstances. 
