The long anticipated by book by Eric Dollard, Vesor Algebra as Applied to Polyphase Power Systems, is finally available.
Take note that this book reveals that Eric Dollard’s understanding of Polyphase Power Systems their rotating waves is actually more advanced than either Tesla or Steinmetz’s original understanding.
This is a historically important book not just for electrical engineers, but eventually for music theorists because it allows them to finally have the simplified sequence algebra necessary to fully analyze polyphonic music.
Proceeds from this book go to supporting EPD Laboratories so Eric Dollard can continue his work on the Advanced Seismic Warning System, other projects as well as continuing his writing.
Way back in Tesla’s time, Charles Proteus Steinmetz was hired by General Electric to analyze Tesla’s polyphase systems. Most people are familiar with today’s three-phase systems, but Tesla’s was actually four phase. Although Tesla conceived of all of this, it was Steinmetz who was the real builder and adapted the four phase system into a three phase system that is in use today.
Steinmetz was the one who first used Versor Algebra in his analysis of Tesla’s polyphase systems – it is also known as or possibly more accurately known as Sequence Algebra.
This left a huge complication because the three phase system didn’t have the normal pluses and minuses in the mathematical analysis so there was this gap for all of this time that did not make it possible to really analyze three phase systems with conventional math.
Dr. Fortescue is someone that most people have never heard of, but he developed a system known as “Symmetrical Coordinates” and that made it possible to analyze systems of any number of phases thereby closing the gap.
Where Eric Dollard’s Versor Algebra book comes into play is that Eric is presenting a General Theory of Versor Algebra for the first time in mathematical history tying all of this together and bringing it to the simplest form possible.
Once again, Eric Dollard demonstrates his genius mastery of the Tesla Sciences like nobody else has been able to do. Whether or not you have an interest in the math, we hope when it is released on March 22nd, Sunday, that you’ll help support Eric and his work that is very important to the electrical sciences by getting your own copy.
If this were 100 years ago, Eric Dollard would be a world wide celebrity for developing this Versor Algebra book for the electrical sciences along with Tesla, Steinmetz and others who were genuinely involved in researching the very foundation of the electrical sciences. Let’s show Eric that his monumental efforts are genuinely appreciated!
Many conventionally trained academics deny the possibility that a machine can produce more work than we’re required to supply on the input. As long as a system is open to the environment where more potential energy can enter the machine, then more work can be done than we had to pay for.
The downfall to conventional academia is that the concepts of energy and potential energy are taught completely backwards and there is no accounting for what the actual source potential for electrical charge even is or where it comes from.
Once the distinctions are straightened out, then we can see that not only is it possible to create a free energy machine, if we build them according to the natural principles of open systems, it is practically a requirement for them to output more than we have to input.
Closed system thermodynamics as taught in school only apply to closed heat systems, yet the entire field of physics, etc. try to apply it to electromagnetics, mechanical systems, you name it. The fact of the matter is that conventional closed system thermodynamics actually do not even apply to any natural system in the Universe – because every natural system is open to other sources of potential energy!
We recommend reading a copy of The Quantum Key by Aaron Murakami as a basic primer that explains the reality of free energy systems in terms so simple, only a junior high school level understanding is needed.
The Quantum Key is actually a simplified Unified Field Theory for the layman that links gravity, inertial, electricity, mass, light speed, etc… all together in a seamless manner and even gives a simple explanation of what Time may actually be. Make sure to at least read the descriptions of the chapter on the website below!
This book is available at a hugely discounted price, which will change soon, so make The Quantum Key a part of your library – its a perfect companion to the Bedini SG Trilogy!
The Bedini SG is a “right of passage” for anyone that wants to learn how to actually build real Tesla technology in miniaturized form. It is the best way to start for anyone that is new and even seasoned engineers have a thing or two to learn from it.
Here is a free download that includes Chapter 1 from Bedini SG – The Complete Beginner’s Handbook: Bedini SG
It also reviews the Intermediate and Advanced books and discusses why knowledge of the Bedini SG is a * MUST HAVE * – especially if you’re interested in preparing for the future.
The Bedini SG has been around for about 15 years and it seems there is no end to the surprises that occasionally pop up that teach us one thing – we haven’t learned everything about it yet!
On November 2nd, we’re launching Bedini SG – The Complete Advanced Handbook, which shows how to make low drag generators to make the most use of the mechanical work, but there is a whole lot more.
One thing we’re going to full disclose is a special mode that John Bedini developed that allows us to increase the output by 100% with only a 50% increase of the input! How do we only increase the input energy by 50% but DOUBLE the amount that is available on the output? The Advanced book will give the entire schematic and working theory about how and why it works.
On November 2nd, we’re making a video available on the Bedini SG website where we discuss all three books but we even show a demo where the electrical output doubles by only increasing the front input by half.
If you don’t have the first or second book, just wait until November 2nd when you can get your hands on the entire triple combo pack at a huge discount!
With this third book, this trilogy will give more information about real free energy circuits than anything that has ever been published. Especially when we disclose all the circuits necessary to accomplish it.
Live Q & A call with Jim Murray & Paul Babcock taking questions from those who own a copy of their recent presentation The Secret of Tesla’s Power Magnification regarding the principles taught as applied to Jim’s SERPS technology which was shown to have a COP of almost 50.0 (5000%).
Bedini SG – The Complete Advanced Handbook is the most highly anticipated release that we have ever made available.
Two of the most popular books are Bedini SG – The Complete Beginner’s Handbook and Bedini SG – The Complete Intermediate Handbook.
The Beginner’s book walks the reader through all of the exact specification that John Bedini uses to build his own energizers, plus is shows the difference between repulsion and attraction mode which has only been discussed in the last couple years.
The Intermediate book teaches all about Tesla’s Method of Conversion, which is taking the electrical recovery from the coil, charging a capacitor with it and discharging that to a low impedance load like a battery.
The Advanced book will cover in great detail how to turn the mechanical work of the wheel into electricity in a very low draw way but it will also reveal a few more surprises. For the first time ever, details on the famous “Watson Machine” will be disclosed that have never been public as well as details on a few other Bedini technologies. This book has the keys necessary to take everything to the next level like never before.
The release date for Bedini SG – The Complete Advanced Handbook is November 2nd, 2014.
Thirty years ago at the Tesla Symposium in Colorado Springs, Jim Watson demonstrated a very large scale machine based on John Bedini’s 1984 Free Energy Generator.
At the conference, the machine was running and producing a lot of mechanical work, but what was amazing is that it kept itself charged up the whole time!
It had a large three foot diameter flywheel that weighed about 800 pounds attached to an aircraft starter motor, which was battery-powered. The generator section charged a bunch of coils like a magneto, which sent this back to the battery running the machine.
Below is a diagram that John Bedini showed for his smaller prototype.
Between this image and some other diagrams – Jim Watson who had no electrical engineering background make it work.
Over the years, many people have tried and failed at replicating these claims. Very soon, we are releasing Bedini SG – The Complete Advanced Handbook. Included in this highly anticipated release are details about the Watson Machine that nobody has figured out in the last 30 years. And, the keys to making it work have been sitting right there in plain site!
There are already two books: Bedini SG – The Complete Beginner’s Handbook and Bedini SG – The Complete Intermediate Handbook. These are an absolute requirement to have in order to understand the basic working principles of self-regenerative energizers. And with the Advanced book coming, it will take everyone’s experiments and results to the next level!
We’re still on track to release this highly anticipated Ebook at the end of October or the beginning of November.
This book picks up where the Intermediate Handbook leaves off and covers all of the major details and spin-offs from John Bedini’s life-time search for the best design of a self-running, electro-mechanical machine.After learning this material, you should understand enough of the science and method that John has shown to start experimenting with larger scale models which should lead to both self-running behavior and the production of enough extra energy to operate external loads.
Not only will this book focus on optimizing electrical recovery with a low drag generator, but it will cover some of John Bedini’s other technologies that have been released in the last 30 years.
For example, the famous “Watson Machine” was demonstrated at the Nikola Tesla Centennial conference put on by the Tesla Society in Colorado Springs in 1984 commemorating Tesla’s arrival to the United States 100 years ago. It was the largest version of John’s original Energizer shown in John’s 1984 book ever shown in public. Many people have tried to replicate this machine over the years but nobody has put all the pieces together even though it’s been in plain site all this time.
In a few days, keep an eye out for another email from us with a link that will give you something to think about when it comes to the Watson Machine.
THE SECRET OF TESLA’S POWER MAGNIFICATION – LIVE CALL COMING
Jim Murray and Paul Babcock co-presented The Secret of Tesla’s Power Magnification at the recent 2014 Energy Science & Technology Conference.
This video shows Jim Murray demonstrating his SERPS technology that produces 20 times more energy heating resistors than the net draw from the power supply! That is 2000% more – https://www.youtube.com/watch?v=aDjWwoD83Rk
Here is an interview we did with Jim & Paul with their other SERPS demonstration that Paul Babcock replicated that shows almost 5000% more work done in lighting incandescent bulbs compared to the net draw from the power supply: https://www.youtube.com/watch?v=rP6fpN6avIc
Everyone who purchased their presentation will be receiving an invitation to a private live call so you can ask them questions about their presentation. If you already have a copy, make sure to confirm an email that says, “Confirm your subscription” because that puts you on the member’s list to receive the invite.
Fred Fuchs, the producer of Bram Stoker’s Dracula and Godfather III agreed to produce an upcoming new TV series – Tesla Man of Light. Stacy James Fry heads up the campaign to make this a reality. Watch this!
Here is a recent interview with James Stacy Fry, which will answer more questions about this remarkable campaign that will help make Tesla a household name…