There have already been a few posts/videos on shorting coils and they’re relationship to the Kromrey Generator. To show the potential, no pun intended, of shorting the Kromrey Generator coils, another video is available.
You can see that over 700 volts AC is available by shorting it’s small generator coils or almost 600 volts DC from the same coils.
Get Peter Lindemann’s presentation on the Kromrey Generator here: https://emediapress.com/shop/bedini-sg/
First we posted about the Kromrey Generator speeding up when the generator coils are shorting out: http://emediapress.com/2017/12/20/kromrey-generator-speeds-up-when-shorted-out/
Second we posted Shorted Coils Part 1 to get into some of the concepts about this here: http://emediapress.com/2017/12/29/shorted-coils-part-1/
Here is Shorted Coils Part 2, which shows a couple benefits of why you would even want to do it, possibly, in some of your own builds. You wind up with more output from your coils while simultaneously unloading the prime mover. We’ll show a bit more on the Kromrey with a few more experiments in another video soon:
Share this with the buttons below and register at the 2018 Energy Science & Technology conference here: Energy Conference
In the last Energy Times newsletter, I shared a bit about John Bedini’s Kromrey Generator and demonstrated that it speeds up when the output is shorted. You can see that here: http://emediapress.com/2017/12/20/kromrey-generator-speeds-up-when-shorted-out/
Here is a video (Part 1) going deeper into the coil shorting concepts and soon after, I’ll post Part 2 that shows what the benefit is.
Share this with the buttons below!
The Kromrey Generator is one of the most interesting generators that has made it to the public. Although it has never been mass produced, enough researchers and developers have built them to demonstrate that it definitely has some anomalous properties. John Bedini is one of those geniuses that has been involved with the Kromrey Generator before most have ever heard of it as well as having built many variations that hold up to the claims of the inventor.
At the 2016 Energy Science & Technology Conference, Peter Lindemann presented a large-scale Bedini SG that ran itself and kept its batteries charged up as well as demonstrating John’s 2 Pole larger Kromrey Generator. In the demonstration, it showed that the input motor drew about 32 watts while charging a battery with 72 watts. That is about twice as much output as what was being supplied to the input. Peter’s presentation that goes into the operation of this machine is available here titled Bedini SG – Beyond the Advanced Handbook – https://emediapress.com/shop/bedini-sg/
On that same website is the third SG book called Bedini SG – The Complete Advanced Handbook and that goes into a lot of the details on the Kromrey Generator as well.
Below is a video where I show a simple video of the machine actually speeding up as the output is shorted – normally, this would create so much counter-torque that it will make it very difficult for the input motor to turn. Instead, it actually climbs 50-60 rpm while the input power actually drops! There is a simple reason for this but there are other anomalous aspects that conventional science cannot explain such as the demonstration results that Peter showed at the conference. The below video also gives a few closeups of the Kromrey Generator that John Bedini built (one of them) as well as an error that I discovered in the Kromrey Generator patent that nobody has ever pointed out until now.
Make sure to register for the 2018 Energy Science & Technology Conference – you never know what we might show next! Energy Conference
Share this video with your friends with the share buttons below – not everyone has seen a generator that actually unloads the prime mover when it is shorted out! Please understand the significance of this machine is profound. Imagine a gas generator set running and you turn on some lights powered by the generator but the gas engine stays the same RPM. That means that it doesn’t take more electricity to power a load. I still consider this technology in its infancy and there is a lot of room for improvements, which may be coming out in the near future.
