By using carbon particles embedded in nano carbon spikes, a complex chemical reaction is triggered when voltage is added that directly converts co2 in water into ethanol at a 63% efficiency.
This is not a technology that will “save the world” at this point, but it is the beginning of a new promising idea and we can’t wait to see where it will end up.
Royal Raymond Rife is well known for his “Rife Machine” that uses the “Rife Frequencies”, which he discovered by using his Rife Microscope.
What is of significance about this microscope is that it is able to see things that are so small that it’s considered impossible according to the science of conventional optics. Rife actually succeeded in doing this by using some very innovative prismatic and other methods. This is what his miracle microscope looked like:
Rife Microscope
Having this kind of technology opens up a whole new world of possibilities in many different areas of science.
Although the Rife Microscope is long gone, there is a new, relatively simple and in expensive method that has been devised that apparently will give all the same benefits!
Conventional microscopes can only see things that are larger than the half wavelength of the light that is being used, which limits the objects being seen to about 200nm (nano-meters) or larger.
Although there have been breakthroughs in microscope technology for a while now, it wasn’t until recently that this became possible using visible light. That means you would be able to see into the world that has remained invisible since the days of the Rife Microscope.
By using millions of 15nm wide titanium dioxide spheres that is applied to the object you want to examine, you’ll be able to see object as small as 45nm.
Keep in mind that this is with full visibility of the objects in life time as if you are looking at a live specimen under a regular microscope. And, if you use this in conjunction with any normal microscope, just by applying this new lens, it will increase its optical magnification power by five times.
Janja Glogovac is creating a very important documentary about Nikola Tesla and it will feature some of our favorite top experts on the Tesla Sciences such as Eric Dollard, Paul Babcock and others.
A BRAND NEW trailer is available on his link that you just have to see – you’ll probably recognize a few people in it!
Help support the completion of this documentary by donating whatever you can to the cause and ask your friends to do the same.
Here is a full tutorial on how I installed my patented plasma ignition system on a 1977 Datsun 620 pickup with a rebuilt L20B engine.
If you want the full book and presentation package that gives you more than you ever wanted to know about this plasma ignition system that obsoletes virtually ever performance ignition system on the market anywhere, then visit https://emediapress.com/shop/ignition-secrets/
Here’s the recording of Paul Babcock’s live call from September 12th, 2016. There are some pictures in the video from the 2016 Energy Science & Technology Conference.
We hope you enjoy this and share it with your friends with the buttons below!
Mike Water’s wind turbine design can produce 12,000% MORE electricity compared to a standard 3 blade turbine of the same diameter. And, it can start generating electricity in less than 1 MPH. Check out this awesome looking transparent version created by one of the member’s of Energetic Forum!
Plasma Impulse Motor by Aaron Murakami, presents a novel way to power an inductor that appears to possibly have a reduced resistance/impedance effect in the entire circuit. This may prove out to show how to get a stronger magnetic punch on a coil thereby increasing its power so we can have stronger motors for the same or less electricity. It is also a 100% mirror image of the Gray Tube circuit, which is though by many to be THE Holy Grail of Free Energy since the output is astoundingly high compared to the input. If the inductor’s impedance is being reduced, even a little, this is a very important discovery in electromagnetic science. Release date – August 27, 2016. Learn more: Plasma Impulse Motor
Scotch Yoke Solenoid Motor by Aaron Murakami, Bob Teal’s Magnipulsion motor ran on a car battery and generated enough mechanical work to run a 20 ton conveyor belt for 6 months and the battery never went dead!
His motor used solenoid coils that when charged, they would pull an iron rod into them and these rods turned a conventional crankshaft. When the coils were turned off, he recaptured almost all the electricity and used it over and over and over. Despite the poor mechanical performance of the crankshaft that is just like the ones in most of our automobiles, he still had those profound results.
When I first learned about the Bourke Engine about 8 years ago, the most efficient gasoline engine ever developed, the reciprocating motion was turned into rotary motion with a very intriguing mechanism called a Scotch Yoke. While that yoke is not new and was not even new when Russell Bourke used it in his opposing piston engine, it helped to take his efficiency to levels that are claimed to be impossible. Instantly, I knew that marrying the Scotch Yoke mechanism to a Bob Teal type electromagnetic motor would be the ultimate combination and this presentation shows the concepts, timing mechanism and a masterfully built Scotch Yoke with iron rods going into solenoid coils with only a couple thousand’s inch gap!
The concept of putting these two things together is mine, Peter Lindemann who has studied the Bob Teal technology for years and is actually the inspiration for his variable reluctance motor that Eric Dollard tested at 108% back in the 1980’s came up with the timing mechanism, Ken Flanigan did all of the machining and Graham Gunderson is helping to design the driver circuit. For any of you that have wanted to see a collaboration between some of the presenters at the conference, this is it. What is presented is the history of the Bob Teal motor and how it relates to this project, where we are at with the project at the moment and where we’re going with it. Proceeds from this presentation will go to funding the rest of the project so we can open source it all and bring it straight to the people! Make sure to get a copy so you can learn about the most efficient way to turn reciprocating motion into rotary, which can pump water, drive you around town (scaled up) or other mechanical applications with the minimum amount of electricity. Release date – August 25, 2016. Learn more: Scotch Yoke Solenoid Motor
Paramagnetic and Diamagnetic Field Experiments by Professor Robert Haralick, Guy Obolensky & Loren Zanier
Paramagnetic & Diamagnetic Field Experiments by Professor Robert Haralick, Guy Obolensky & Loren Zanier – In this talk, we describe experiments by which the diamagnetic field by the bloch region and by the poles of a magnet may be measured using 3-axis Hall effect milligaussmeters, magnetoresistive milligaussmeters and sensitive differential electrometers. Our experiments provide evidence for the existence of a diamagnetic field and the vortex of the paramagnetic field. Experiments also reveal longer spinning times with a load than without and a loss of weight. Release date – August 23, 2016. Learn more: Paramagnetic & Diamagnetic Field Experiments
