Posted on Leave a comment

NEW RELEASE – 2023 ESTC – Panel Discussion 3

Here’s the latest Panel Discussion #3 from the 2023 ESTC with the following presenters:

Featuring

Peter Lindemann

Paul Babcock

Aaron Murakami

Jeane Manning

Jeremiah Ferwerda

Posted on Leave a comment

NEW RELEASE – 2023 ESTC – Jeremiah Ferwerda’s Tesla Turbine Powerplant

Last year’s presentation demonstrated a 3 inch diameter Tesla Turbine operating in the cryophorus mode whereby a hot and cold take under vacuum with a turbine in the middle can create a high speed rotation, which can produce electricity. This year, you will witness a production ready prototype of a 6″ diameter Tesla Turbine operating in the same mode, which has already been tested without an electrical load at over 42,000 RPM, which equates to a peripheral speed, which is faster than Mach 1. The goal is to develop this into a viable powerplant.

After the conference, at 260F, the turbine produced 1300 watts. Part of that test is in the preview video but is not included in the conference presentation.

See the preview video on the presentation page.

Posted on Leave a comment

The Higherside Chats with Aaron Murakami & Jeremiah Ferwerda

Jeremiah and I were interviewed by Greg Carlwood of The Higherside Chats a few weeks ago and we discussed some updates from the conference and went into depth into the Tesla Turbine project. The Higherside Chats is a very popular podcast where Greg has interviewed countless authors, presenters and so no who are involved in all kinds of taboo and other topics. You can listen to our interview for free and I’d encourage everyone to subscribe to his podcast and get a membership with The Higherside Chats.

Listen to our interview with the link below for Free! Thank you Greg!

Posted on Leave a comment

ESTC 2022 New Release – Tesla’s Thermodynamic Transformer Part 3 by Jeremiah Ferwerda

Nikola Tesla's Thermodynamic Transformer by Jeremiah Ferwerda (2022)

Here is the third presentation by Jeremiah on Tesla’s favorite invention – the Tesla Turbine.

Last year, the hot tank was on the back of a trailer and it took a lot of space to setup everything up and it worked so-so.

This year, it out performed last year’s demonstration and it fit on a table top! Also, the vacuum box the turbine was inside of is gone and there was a much lower thermal differential. Last year’s cold tank was in an ice bath and this year, it was 85 degrees F!!

This is by far the most efficient Tesla Turbine demonstration for producing electricity based on a low thermal differential that anyone is showing – to our knowledge.

See the preview here or get a copy: Tesla’s Thermodynamic Transformer Part 3

Posted on Leave a comment

2022-04-02 Tesla Turbine Update with Jeremiah Ferwerda

Jeremiah Ferwerda - Tesla Turbine

Here’s the latest update with Jeremiah Ferwerda of My Tesla Power – formerly known as iEnergySupply.

Posted on 1 Comment

2020-09-28 Jeremiah Ferwerda Interview on Tesla Turbines & iEnergy Supply

Tesla Turbine - Jeremiah Ferwerda

This was a few months ago in our shop when we were helping Jeremiah with some machining for his new Tesla Turbine model.

Support Jeremiah’s work through his website: https://ienergysupply.com/

Jeremiah’s presentation from the 2021 ESTC is available here:

So far, Patreon is the primary way to financially support his efforts but more will be added to this website soon.

Please LIKE this video and join my YouTube channel! https://www.youtube.com/c/AaronMurakami13

Posted on Leave a comment

Nikola Tesla’s Thermodynamic Transformer by Jeremiah Ferwerda

Tesla Turbine - Jeremiah Ferwerda

This is a must have presentation because the Tesla Turbine is one of the “low hanging fruits” when it comes to a technology that is the closest to fulfilling a sustainable energy generator that can power your home or business. With relatively low temperatures, you can have a turbine spinning 10’s of thousands of RPM turning a generator that supplies electricity. There are many variations and applications of the Tesla Turbine technology and the particular one that Jeremiah Ferwerda is focusing on is the “cyrophorus” method.

WATCH THE FREE PREVIEW VIDEO ON THE WEBSITE! 

That means there is a hot and cold side to the turbine – the warm water tank boils water at a low temperature because a vacuum is applied to it, that steam drives the drive stage of the turbine and the other side is a vacuum side that pulls a vacuum through the drive stage all the way to the water to keep it boiling at a low temperature.

Solar electricity is about 20% efficient if you’re lucky but what most people don’t understand is that using the sun to heat water is much more efficient. So, with not much effort to heat some water with the sun, you’ll have a solar battery that runs a turbine at high speed making electricity – literally, the concept is as simple as that and for this particular application of the Tesla Turbine, Jeremiah is further ahead that anyone else developing more and more efficient methods with the cyrophorus method. Imagine a solar electric system that winds up being 40, 60, 80 or even close to 100% efficient! 

In 2020, Jeremiah presented other aspects of the Tesla Turbine system but that presentation was never released because we were not able to include a demonstration. We’re also releasing this presentation at the same time so you can get either the 2020 1.5 hour presentation or the 2021 1 hour presentation with demo or both at a further discount.

Get your copy here: https://emediapress.com/shop/nikola-teslas-thermodynamic-transformer/

Posted on Leave a comment

2-Stage Tesla Turbine Assembly by Jeremiah Ferwerda

Jeremiah Ferwerda 2-Stage Tesla Turbine

Here is a video recorded a few months ago of Jeremiah with iEnergysupply giving a video walk through of a recent 2-Stage Tesla Turbine assembly. This was recorded at our shop in Spokane.

Jeremiah will be presenting an advanced 2-Stage Tesla Turbine at the 2021 ESTC – get your tickets now while you can: https://energyscienceconference.com

To support Jeremiah’s work, visit https://www.patreon.com/ienergysupply

Posted on 1 Comment

Self-Sustaining 2-Stage Tesla Turbine

Here’s a self-sustaining 2-stage Tesla Turbine setup – watch the video…

Cryophorus 2-Stage Tesla Turbine self-runs by creating it’s own vacuum to boil water in a warm tank at low temperature. This vapor pressure runs the first stage turbine, while the second stage maintains the vacuum. This runs in this self-running mode as long as there is enough warmth in the front side tank.

There will be more disclosed at the 2020 Energy Science & Technology Conference, which has not be revealed publicly yet with possibly other relevant demonstrations!

If you want a bit more insight, it’s recommended to get this book. Tesla’s Engine – there are only a handful of used copies left. When those are gone, they’re gone!

The 2020 ESTC is 1/3 sold out already, get your tickets while you can! http://energyscienceconference.com