Posted on Leave a comment

Paul Babcock 9/12/2016 Live Call Recording

Here’s the recording of Paul Babcock’s live call from September 12th, 2016. There are some pictures in the video from the 2016 Energy Science & Technology Conference.

We hope you enjoy this and share it with your friends with the buttons below!

Posted on Leave a comment

NEW RELEASE – Magnetic Implosion Transformer by Graham Gunderson

Magnetic Implosion Transformer by Graham Gunderson
Magnetic Implosion Transformer by Graham Gunderson

Magnetic Implosion Transformer by Graham Gunderson –This presentation shows a solid state transformer invented by Graham that measured out at 570% more output than the input he had to pay for at a live demonstration. He can even dial the input down so the input goes negative, which means the COP (coefficient of performance) is infinite (ratio between intended work compared to input we paid for. These measurements were validated by multiple methods that all corroborated with each other. Release date – August 3, 2016. Learn more: Magnetic Implosion Transformer

Posted on Leave a comment

July 2016 – A & P Electronic Media Newspaper

Download this FREE newspaper by A & P Electronic Media.

There are some articles, sample catalog, conference schedule and a link to a new Connected TV station, Tesla Media Network, that we launched months ago.

Download now: 2016 Energy Conference

Posted on Leave a comment

Paul Babcock’s Motor Video Released

Here is a short video demonstrating Paul Babcock’s motor that runs with no Back EMF. That means the rotor and stator do not see each other so they do not cause magnetic drag on each other. It can only motor as there is no generator action like most motors that operate with Back EMF.

It is very important to read the slide at 7 seconds into the video because that is a highly profound and astounding statement that is 100% true and essentially is one of many nails in the coffin of conventional electromagnetics. What is proves is that magnets are a source of energy, period.

Magnetic Energy Secrets by Paul Babcock
Magnetic Energy Secrets by Paul Babcock

It is brief but enough to show that it does indeed run, since Paul recently repaired parts of the circuitry and power supply. It is also very important to understand that he has already shared the basic operating principles and theories in Magnetic Energy Secrets Parts 1, 2 & 3 here: https://emediapress.com/shop/magnetic-energy-secrets/

SHARE THE TRUTH WITH OTHERS BY USING THE FACEBOOK, TWITTER & OTHER BUTTONS BELOW!

Posted on Leave a comment

OVERUNITY DISCLOSURE SCHEMATIC VIDEO

Graham Gunderson Overunity Disclosure
Graham Gunderson Overunity Disclosure

At the 2015 Energy Science & Technology Conference, Graham Gunderson gave a presentation one of the simplest experiments anyone can do that demonstrates “overunity”. In other words, there is more measurable output than the operator has to input.

The video presentation has been available but last night, Graham was kind enough to allow us to video a whiteboard presentation with him giving in-depth details on exactly how this experiment was put together. This includes schematics, precise specs on the transformer and other details necessary for anyone to replicate this experiment.

If you already have the “Overunity Disclosure” presentation by Graham, then just visit the same download page and there is an extra video there called the Schematic Video. Download that for details – it is 36 minutes long and is a presentation on its own.

If you have not gotten a copy of Graham’s Overunity Disclosure presentation from the last conference, get a discounted copy here: https://emediapress.com/shop/overunity-disclosure/

Posted on 3 Comments

Electrical charge is more than the electrons

It is known by those who are skilled in the art of some overunity electrical devices that there is more going on with the electrical current than the typical electron flow theory can account for.

For years, John Bedini has said that current meters that measure electron current only measure what is wasted. Eric Dollard has said that energy is the rate that electricity is being destroyed, which is the same thing since that current multiplied by voltage over time is energy, the destruction of organized potential, and that is what the meters are measuring.

In Jim Murray’s SERPS device, which has demonstrated almost 50 times more work being done than the net draw from the power supply, Jim has said that there is extra energy in the current. However, most conventionally trained engineers simply cannot comprehend how this can be.

For example, if we have an incandescent light bulb in an electrical circuit and we supply electricity to this load, the bulb will light up. However, a common idea is that the bulb is “burning up” all the electricity that passes through it, but nothing could be further from the truth.

In the SERPS for example, electricity is passed through a resistive load and then a capacitor is charged on the other side of the load. Then, at the right time, the capacitor is discharged backwards through the load back to the source (generator) turning it into a motor for that moment. So, if the generator is only a generator for 1/2 the time and is a motor 1/2 the time, the motor or prime mover moving the generator to begin with sees virtually no net load.

That demonstration alone is proof that there are some other properties to electrical current than what can be accounted for by simple electron current theory alone. There is something extra and the so-called electron current, which is measurable by common current meters cannot explain or account for it all – just as Bedini and Dollard has hinted.

A couple years ago, a very important announcement was made during research into “cuprate superconductors”, which contain copper, which revealed that, “electrons are not enough to carry the current. ” Discussion on this “violation” appears to go back to the 1990’s when searching online references.

Although these discussions focus on a very specific sets of conditions required to elicit such violations of common electron current theory, the implications are staggering when reading between the lines.

Whether superconductors are used or not, the fact is that there is more current being carried than can be accounted for by the electrons. So, what else is carrying the current? And does this actually give more credibility to some overunity claims where the end results are more than what can be accounted by measuring the output electrically?

For example, in the Bedini SG, if one were to measure the electrical output of a the machine, it is always less than what actually winds up in the battery. Stating it another way, there is more that winds up in the battery than can be measured leaving the circuit charging it. There are some interesting things that are happening in the battery, which allow the battery to start receiving free source potential from it’s environment, which doesn’t come from the electrical circuit – it’s related but not directly proportional.

Now, this understanding that shows that there is more to the current than the electrons can account for suggest other means for transferring potential to the battery, which probably can’t be measured by the meters. It is understood that there absolutely is more that winds up in the battery than can be measured leaving the circuit, which is indisputable and anything like this that  can contribute to a clearer understanding of these kinds of observations is more than welcome.

In the article from a few years ago, Electrons are not enough: Cuprate superconductors defy convention, The below diagram shows that there is more electrical charge than can be accounted for by electrons alone.

Luttinger’s theorem states that the number of electrons in a material is the same as the number of electrons in all of its atoms added together.

The researchers developed a model outlining the breakdown of Luttinger’s theorem that is applicable to cuprate superconductors, since the hypotheses that the theorem is built on are violated at certain energies in these materials. The group tested it and indeed found discrepancies between the measured charge and the number of mobile electrons in cuprate superconductors, defying Luttinger.

Something other than electrons carries the current.

Electrons are charged. Therefore, if an electron does not contribute to the charge count, then there is a lot of explaining to do.

They even state, “Now the researchers are exploring possible candidates for current-carriers, particularly a novel kind of excitation called unparticles.

Although the defiance of Luttinger’s Theorem is is not at astronomical proportions in this example, a deviation from the predicted amount is still a deviation. Something either follows the “rules” or it doesn’t.

The admission that there might be something other that carries the current is actually quite bold and could potentially rattle the cages of the classical electron flow theory. This isn’t a surprise for those involved in research into overunity systems, but it is a surprise to see conventional references admitting such a thing.

Here is the full article: http://phys.org/news/2013-03-electrons-cuprate-superconductors-defy-convention.html

And here is the original paper: http://link.aps.org/accepted/10.1103/PhysRevLett.110.090403

Posted on 4 Comments

Advanced Magnetics Beats Lenz’s Law

Paul Babcock goes over details on his over 1.0 COP motor that beats Lenz’s Law. Paul will go into greater detail on these principles at the upcoming 2015 Energy Science & Technology Conference.

Learn more here: http://energyscienceconference.com

Posted on Leave a comment

Bedini SG Private Interview 2014-11-10

Here is an invitation only call to answer questions about the Bedini SG books. Only those who have the books were invited to the call. We just made the video public so even if you don’t have the books, you can learn a bit more about the Bedini SG.

You can get copies of the books here – the Trilogy is the best deal: Bedini SG

Posted on Leave a comment

Is Free Energy Really Possible?

Many conventionally trained academics deny the possibility that a machine can produce more work than we’re required to supply on the input. As long as a system is open to the environment where more potential energy can enter the machine, then more work can be done than we had to pay for.
 
The downfall to conventional academia is that the concepts of energy and potential energy are taught completely backwards and there is no accounting for what the actual source potential for electrical charge even is or where it comes from. 
 
Once the distinctions are straightened out, then we can see that not only is it possible to create a free energy machine, if we build them according to the natural principles of open systems, it is practically a requirement for them to output more than we have to input. 
 
Closed system thermodynamics as taught in school only apply to closed heat systems, yet the entire field of physics, etc. try to apply it to electromagnetics, mechanical systems, you name it. The fact of the matter is that conventional closed system thermodynamics actually do not even apply to any natural system in the Universe – because every natural system is open to other sources of potential energy!
 
We recommend reading a copy of The Quantum Key by Aaron Murakami as a basic primer that explains the reality of free energy systems in terms so simple, only a junior high school level understanding is needed. 
 
The Quantum Key is actually a simplified Unified Field Theory for the layman that links gravity, inertial, electricity, mass, light speed, etc… all together in a seamless manner and even gives a simple explanation of what Time may actually be. Make sure to at least read the descriptions of the chapter on the website below!
 
This book is available at a hugely discounted price, which will change soon, so make The Quantum Key a part of your library – its a perfect companion to the Bedini SG Trilogy!
 
Get it now… The Quantum Key
Posted on Leave a comment

What is a Bedini SG?

The Bedini SG is a “right of passage” for anyone that wants to learn how to actually build real Tesla technology in miniaturized form. It is the best way to start for anyone that is new and even seasoned engineers have a thing or two to learn from it.

Here is a free download that includes Chapter 1 from Bedini SG – The Complete Beginner’s Handbook: Bedini SG

It also reviews the Intermediate and Advanced books and discusses why knowledge of the Bedini SG is a * MUST HAVE * – especially if you’re interested in preparing for the future.