Nick Kraakman who has been collaborating with Peter Lindemann behind the scenes is bringing an Adam’s Motor to the 2021 ESTC. Nick will be showing some never before seen pictures of some of Dr. Robert Adams machines that were sent to Peter Lindemann years ago. Peter corresponded with Dr. Adams for years and has compiled more booklets, pictures and letters from Dr. Adams regarding the Adams Motor than anyone that we know of. This information and pictures will all be available in digital downloadable format after the conference.
There are very specific features about the circuit and coils that are no immediately apparent, which give advantages to it’s efficiency and coefficient of performance (COP). This will all be explained at the conference.
Also, get your tickets to the 10th Annual Energy Science & Technology Conference where we will be demonstrating this and more 🙂 – Learn more about the Energy Conference here: https://energyscienceconference.com
“Magnetic Bound State” is an effect where a permanent magnet can be “locked” into free-floating space when in the field of other rotating magnets. This is not new by any means, but it is not widely known in the field of magnetics.
This has many possible applications and the person you see in the video did not invent this concept but he gives a great overview and demonstration of the phenomena.
Keep in mind that if you try to experiment with this concept, you are doing so at your own risk and there is an obvious danger with high speed rotating magnets, rotors, motors, etc.
In 1999, when John Bedini was first introduced to me, this “Glass Case Motor” was the first thing he wanted to show me so it had always been very special to me but it was even more special to John. It is a beautiful work of art that John built because it embodied the many principles that were worked out over the years with his partner from the past, Ron Cole.
The first time he ever presented it publicly was at the 2015 Energy Science & Technology Conference but it was mostly a demonstration along with the history and some of the thinking behind it but he never disclosed the circuit specs, coil details, etc.
John Bedini’s Glass Case Motor – Gravity Wave Space Flux Motor
The interesting or even profound thing about this “glass case motor”, which John actually called the Gravity Wave Space Flux Motor, is that it had run countless hours over the years on 30 year old either alkaline or zinc carbon batteries. The batteries had been seen to be in such poor shape that they were practically falling apart but nevertheless, once the rotor is spun, it picks up speed, turns a propeller shaft with eddy currents, blinks LEDs but the batteries never seem to die.
The long-awaited, full-disclosure that everyone has wanted but never thought would happen is coming to the 2020 Energy Science & Technology Conference.
While we may not be able to claim we know all the answer as to why this particular arrangement of coils, magnets, etc. can demonstrate these amazing feats and we may not be able to claim that we see this motor the same way John did as he had his own unique way of looking at things, you will will walk away with all the information necessary to replicate this historical and amazing machine!
Get your ticket now while you can for our 9th annual event – 2020 Energy Science & Technology Conference – register now: 2020 Energy Conference
RS Stafford is a long time researcher in the energy sciences and knows more about John Bedini’s work than most. He is blessed to have been able to acquire John Bedini’s 6 coiler SG and the large Ferris Wheel Motor.
Here is the goal and why we need your help to raise some donations:
Investigate John Bedini’s Ferris Wheel Hub Motor and Mag amp Motor to get a better handle on how this Tech works. Map out the Magnetic Fields around the various magnets and coils. Document and study all the various values of the components. Add extra Energy producing equipment to demonstrate various concepts that John Bedini has shown us.. And to show case experiments beyond what JB was allowed to show us. Then Bring the Ferris Wheel to the 2020 Energy Science & Technology Conference for a full Presentation.
The below is an excerpt from the full length vendors & announcement videos from the 2019 ESTC.
We need to start here with one very important and valuable piece of information… Paul Babcock is now dedicated to open-sourcing his life’s work in the electrical sciences. He wants to empower the masses with some very profound information that took millions of dollars to learn.
This presentation does indeed contain some weird things relating to overunity effects, but Paul actually shows you the specific waveforms his circuits created when demonstrating overnity. This has never been disclosed to the public before.
A lot of information relating to overunity principles have made it out to the public but in Paul’s opinion, it hasn’t really taken root yet in any substantial way. Many overunity effects are also like ghosts where they come and go so how can we pin it down?
There is definitely some kind of aether weather that influences the machines with its own rhythms where the overunity ebbs and flows – how do we reconcile all of this with conventional physics, which teaches us that these things can’t happen?
Our own perception limits our ability to comprehend these higher dimensional processes and on top of that, most of us are unable to solve problems in certain ways once we are used to solving problems in other ways.
It is important to understand that there are many commonalities throughout many machines that are overunity or in other words, they output more work than is required for us to input into them. Paul will spell these out in no uncertain terms – at least for the type of machines many of us have direct or second-hand experience with.
AIR GAPS – the air has important magnetic properties, which is the secret to many overunity machines and Paul will walk you through many details specifically related to this. Ed Gray, John Bedini and others used these principles that apply to the air and its interesting qualities. This specific information is worth its weight in gold even if this is the only thing you get from this presentation.
Paul will also cover some aspects to Dr. Harold Aspden’s work. This work overturns Einstein’s Relativity as commonly understood as does the work of other forward-thinking scientists. What is so important about Dr. Aspden’s work is that it is using nothing more than relatively simple algebra that describes, time, space and other concepts in simple ways that makes them make sense in a very practical way.
Space itself has “energetic” properties and this is a huge part of the picture that everyone should understand so their foundation has meaning when it comes to the “free energy” sciences.
Something else that is important besides air gaps and energetic properties of space is phase switching – going from electric to magnetic and back to electric. Again, it is necessary to restate the importance that these are commonalities that exist across many overunity machines.
Tesla was known for the ideas of separating the so-called electrons from the radiant energy component of electricity and Paul covers this as well. This presentation is simple enough that most people can understand the concepts even without a background in electrical engineering.
The aforementioned switching methods elicits anomolous TIME effects in batteries, hence the subtitle to this presentatin – IT’S ABOUT TIME – it has more than one meaning. Twenty years ago, John Bedini told me that the capacitors were receiving a TIME charge, but many people didn’t not understand how literal that was. Paul will be going into these concepts from his perspective, which carries a lot of weight. He’s done it with his own builds and he has seen others do it too.
Paul covers his experience with John Bedini’s “Glass Case Motor” and how batteries that were so dead they were corroding away – yet they ran the motor, produced mechanical work, lit LEDs and charged themselves up!
Ed Gray’s motor technology exploited some of these effects and again, Paul wil show you the waveforms that showed the overunity in his own circuits. his inverters showed 106% and his other circuits showed higher such as in his lighting circuits.
And, you will learn how there can be overunity when measuring less than 100%. Much of this comes from Jim Murray’s teachings of how to correctly account for everything happening in a system and when you understand this, you may realize that you too may have overunity but were never able to realize it. This information is very important because most people do not properly account for all the input, output and losses. It’s all about distinctions and this will be spelled out for you.
If you’re serious about overunity and achieving it, this is a must-have presentation that is sure to open your eyes.
In the last few years, Prof. Haralick became interested in subtle energy research but many of the experimental results were not explainable by the common paradigm. Some of his work in this area was presented at the last couple Energy Science & Technology Conferences.
It became apparent to him that there should be a theory that can begin to explain some of this unusual phenomena.
His interest was primarily focus on whether or not Maxwell’s Equations could be generalized so that it could be used to explain some of this work specifically including the type of work Tesla was involved with in the early 1900’s regarding longitudinal waves.
Prof. Haralick will walk you through a very specific sequence of segments that include:
James Clerk Maxwell – an interesting biographic sketch that quite likely, many mathematicians and engineers have not heard of.
The Maxwell Equations in Modern Form – a general review to set the stage for a comparison of the rest of the presentation.
Maxwell’s Original 20 Equations – this takes you back to the original 1865 paper that he had before he wrote his treatise. Prof. Haralick has a strong intent to figure out what was in those equations in the way that Maxwell wrote them because what many people have said is that what Maxwell had in his equations are not the same as what the Heaviside-Biggs Equations are that are currently used.
Quaternions – this goes into the quaternion algebra, which sounds complicated but if you have any background in the most basic high school algebrea, you’ll understand quite a bit of it.
Quaternion Generalized Maxwell Equations – you’ll then be walked through the derivation and this derivation admits to a longitudinal electric wave along with the scalar wave and this type of “scalar wave” will most likely shock you. So far this comprises a little less than half of the presentation.
Tesla, Galinas, Zimmerman, & Hively – the rest of the talk regarding the work of these men, what they built and what they wrote that is relevant to this kind of generalizaton as well as other related topics. Some of the material covered in this section may reveal to you some thing that you have not previously realized – especially regarding Tesla’s work.
Get a copy of this presentation so you can have an authoritative analysis of Maxwell’s Equations that reveals a very specific type of “scalar wave”, which not been openly discussed in any literature on the subject.
Jack Hanlon, Ph.D. believes over unity electrical machines have been built and even demonstrated many times at the ETSC and other places; however, he has never heard a complete explanation of “how they work” that will stand up to the skepticism of a conventionally trained mathematician, physicist or engineer.
The explanations always seem to involve some “mysterious” source of power or slightly nebulous use of magnetism.
The missing piece is always: what is the source of the extra power?
Since we have been unable to answer this question in a satisfactory way, the technology is put in the realm of “voodoo” science, and it is not seriously considered by the larger traditional scientific community.
He believes this holds back the wide spread and rapid development of this important technology and limits the developers to a small community of experimenters.
Switched reluctance generators have always been a prime candidate for overunity results. Eric Dollard who is very skeptical about any “free energy” claims was originally brought into Borderlands years ago to verify a switched reluctance generator built by Peter Lindemann and Michael Knox. Accounting for a sufficient margin of error, Eric Dollard found that it did indeed produce more work than it took to run the machine!
This is probably the most comprehensive analysis on where the free energy is in such machines and it is done in a relatively simple and eloquent manner with simple algebra and geometry.
At the 2019 Energy Science & Technology Conference, Geoffrey Miller will be presenting on a massive Newman Motor that he recently built. He’ll also be disclosing a very * RARE * device invented by Joseph Newman that most Newman fans have never heard of. There will be a demo of this device and all details necessary to replicate it will given!
There are only 150 seats available for the 2019 Energy Science & Technology Conference and they’re going to be sold out months before the conference – register and get your tickets now: 2019 Energy Conference
LOOK AT THE SIZE OF THAT ROTOR!!
Here are the details: NEWMAN’S 10,000 LBS MOTOR IN 2019 & DEMONSTRATION AND EXCLUSIVE FULL DISCLOSURE OF RARE NEWMAN DEVICE – The 2019 talk will be on the NEW 10,000 lbs Joseph Newman Motor built by Geoffrey S. Miller at Energybat Labs. In 2017, he gave a talk about the Newman Motor and a small demo of the motor. This year, Geoffrey Miller will go into a whole new level with the new 10,000 lbs motor. The talk outline is below.
1. History of Newman’s big motors.
2. Who maid the new 10,000 lb. motor
3. Why make a 10,000 lb. motor?
4. What it takes to make a motor this size.
5. What the motor will do.
6. All parts of the motor.
7. All motor data.
8. Power in & Power out.
9. Motor running parts of the lab.
10. Videos of the motor running.
11. Hand out data.
12. Q & A session.
13. A live demo will follow the talk about a Newman device.
It is recommended that you get a copy of Geoffrey Miller’s presentation from the 2017 Energy Science & Technology Conference, which will lay the foundation for the upcoming talk: NEWMAN MOTOR DISCLOSURE
EPD Laboratories, Inc. is a 501(c)3 non-profit charitable corporation so all donations are tax deductible. Please visit http://ericpdollard.com and in the right column, you can donate by PayPal or you through the mail. Anything you can donate would be greatly appreciated and is very much needed at this time.
At the 2018 Energy Science & Technology Conference, more revelations are disclosed about the last one year of experiments with the Zero Force Motor.
Within this follow up presentation, you will find all the specs, which should be considered a standard built for more experiments to get start with. It works and has already been proven out by Yaro Stanchak and James McDonald.
Yaro also shares the differences in more detail on attractive vs repulsive mode and how this looks diagrammatically so the viewer can benefit from these findings. A thorough walk-through on the Zero Force Motor’s timing characteristics of the magnet’s geometry in relation to the coil geometry is covered. This is very important and cannot be stated enough – timing is crucial and can make or break your results.
Get 25% off for a limited time with this coupon: ZFM25
Keep in mind this is a developmental process and there are no free energy claims. It is a novel motor with unique aspects that have not been used or exploited in conventional motors and bit by bit, the potential of what this machine is capable of is slowly revealing itself.
Pay close attention to the date in the table presented by Yaro. You may find there is more than meets the eye. And you will definitely see that at certain RPMs, which may indicate some resonant points that you will see the Hidden Dance happening within the machine as Yaro shows on the scope.
There is also a difference in the characteristics of how the motor operates in relation to its waveforms that are measurable if the ZFM is running on a battery compared to a linear current power supply. In other words, there appears to be advantages to running it on a battery compared to a power supply. Professor Robert Haralick during questions points out a very plausible reason for this and that is that when running, the ZFM is producing longitudinal waves that are accepted by the battery(s) but the linear amp power supply cannot.
This would be completely consistent with John Bedini’s experience over the years with experiments on the Bedini SG when running on and charging batteries, which have shown unusual input vs output ratios and most of this disappears when running these machines on conventional power supplies. It has been stated over the years that the battery is very important as part of the open system and once again, these ZFM experiments shown by Yaro seem to indicate the same results.
Here are a few of the subjects that Yaro will show in this presentation:
Introduction and Brief Review Of Zero Force Motor Design and Operation