This is a must have presentation because the Tesla Turbine is one of the “low hanging fruits” when it comes to a technology that is the closest to fulfilling a sustainable energy generator that can power your home or business. With relatively low temperatures, you can have a turbine spinning 10’s of thousands of RPM turning a generator that supplies electricity. There are many variations and applications of the Tesla Turbine technology and the particular one that Jeremiah Ferwerda is focusing on is the “cyrophorus” method.
WATCH THE FREE PREVIEW VIDEO ON THE WEBSITE!
That means there is a hot and cold side to the turbine – the warm water tank boils water at a low temperature because a vacuum is applied to it, that steam drives the drive stage of the turbine and the other side is a vacuum side that pulls a vacuum through the drive stage all the way to the water to keep it boiling at a low temperature.
Solar electricity is about 20% efficient if you’re lucky but what most people don’t understand is that using the sun to heat water is much more efficient. So, with not much effort to heat some water with the sun, you’ll have a solar battery that runs a turbine at high speed making electricity – literally, the concept is as simple as that and for this particular application of the Tesla Turbine, Jeremiah is further ahead that anyone else developing more and more efficient methods with the cyrophorus method. Imagine a solar electric system that winds up being 40, 60, 80 or even close to 100% efficient!
In 2020, Jeremiah presented other aspects of the Tesla Turbine system but that presentation was never released because we were not able to include a demonstration. We’re also releasing this presentation at the same time so you can get either the 2020 1.5 hour presentation or the 2021 1 hour presentation with demo or both at a further discount.
Nick Kraakman who has been collaborating with Peter Lindemann behind the scenes is bringing an Adam’s Motor to the 2021 ESTC. Nick will be showing some never before seen pictures of some of Dr. Robert Adams machines that were sent to Peter Lindemann years ago. Peter corresponded with Dr. Adams for years and has compiled more booklets, pictures and letters from Dr. Adams regarding the Adams Motor than anyone that we know of. This information and pictures will all be available in digital downloadable format after the conference.
There are very specific features about the circuit and coils that are no immediately apparent, which give advantages to it’s efficiency and coefficient of performance (COP). This will all be explained at the conference.
Also, get your tickets to the 10th Annual Energy Science & Technology Conference where we will be demonstrating this and more 🙂 – Learn more about the Energy Conference here: https://energyscienceconference.com
The Bourke Engine not only destroys Carnot’s Law, it’s just plain amazing! Roger Richard is the world’s leading authority on the subject, has multiple, original motors built by Russell Bourke himself, and has even built one that has a thermal efficiency of about 85%.
This ORIGNIAL Bourke engine will be displayed at the 10th Annual Energy Science & Technology Conference in Coeur d’Alene, Idaho from July 7 to 11, 2021. Also, Sky Huddleston of the RocketHeater.com will be coming to the conference as well and he is bringing his original Bourke Engine as well! Two real Bourke Engines at the same conference? This probably has never happened!
Also, get your tickets to the 10th Annual Energy Science & Technology Conference where we will be demonstrating this and more 🙂 – Learn more about the Energy Conference here: https://energyscienceconference.com
Although it won’t be running, Roger is bringing a 30 Cubic Inch Bourke engine (see pics below) so everyone can see it up close. He may even disassemble it so you can see how the inside is put together. This is by far, the most important internal combustion engine ever created. Technically, it is a detonation engine with some interesting properties and it runs so cool, you can put your hand over he exhaust port while it is running. Roger has demonstrated that many times over the years.
This is a very rare opportunity to learn from the most knowledgeable expert on the subject, see two real Bourke Engines and pick Roger’s brain on just about anything you’d ever want to know about it.
This public domain image shows the operating principle but there is a lot more than meets the eye and Roger has taken it beyond what even Bourke himself could do.
The Bourke Engine Documentary is a book compiled by Lois Bourke to highlight her husband’s life work and you can get a copy of it here: https://emediapress.com/shop/bourke-engine/
Subscribe to Roger’s YouTube Channel – Bourke Engine TV – https://www.youtube.com/channel/UCkM9mEASUZXiQHrorR0d4kg and make sure to watch all his videos. You’ll have no doubt that he is the modern day master of the Bourke Engine.
Besides Eric’s personal presentation on Fortescue at the 2021 Energy Science and Technology Conference, which is all about his Versor Algebra mathematics and how it applies to the power grid, Eric and I will be presentation a few demonstrations with the equipment that we’ve been building.
One of the most popular questions from those who are exploring the reality of “Free Energy” is, “Where do I start”?
The first step is to fully understand that there are no violations of physics with free energy systems. It’s not about more out than in, it’s more out than what we put in. Obviously, that implies there is extra input that we aren’t providing so there is no funny business and no over 100% efficiency claims.
How can a system output more than we put in but be under 100% efficient? If that doesn’t make sense to you, there is a good reason why – the proper distinctions are never taught in school although it is so simple that an elementary school child can understand the principles.
Here are some recommended starting points and why…
Hacking the Aether is a presentation I gave several years ago, which is based on my old book The Quantum Key. It is a fluid aetheric model, which is essentially a unified field model that shows why relativistic effect happen and why, what gravity is, what the real difference is between energy and potential, the basics of open vs closed systems and more. You do not need a technical background to learn the reality about free energy and you will learn the necessary distinctions that you will not learn in school. https://emediapress.com/shop/hacking-the-aether/
Open System Thermodynamics is a section in Hacking the Aether and is probably the most important because it shows Nobel Prize material that says that any system that is open with the environment CAN output more than the operator inputs. Peter Lindemann presented on this at one of our earlier conferences and remains one of the most important presentations we’ve produced. If you want even more irrefutable evidence that Free Energy is legitimate, after watching Hacking the Aether, this is a must see. https://emediapress.com/shop/open-system-thermodynamics/
The Dynamic Ether of Cosmic Space is a must-have book written by Dr. James DeMeo. The ether exists as a matter of fact and Michelson-Morley never disproved anything. As a matter of fact, Michelson defended the ether long after – this truth is in my presentation above but if you want to see the most important collection of studies that have been done all the way to the modern day showing the ether – this book has it. There has never been a compilation quite like this and nobody should receive a degree in physics unless they study and understand this material – it is that important. So with the above two presentations and this book (there is a presentation on this by Dr. DeMeo that came out right before the book), you will understand not only the principles of free energy systems, but you will understand about the source potential itself, which is the ether. https://emediapress.com/2019/10/23/the-dynamic-ether-of-cosmic-space-by-james-demeo-ph-d/
A Common Language for Electrical Engineering – Lone Pine Writings by Eric Dollard is a book, which is available as a paperback on Amazon. It lays out and defines all the basic electrical engineering dimensions. So, now we’re getting to the practical application of real energy science, which actually has its roots in the electrical sciences, which has not been taught for a very long time. Whether you are a newbie or electrical engineering expert, this book is a must have resource: https://www.amazon.com/gp/product/1518815936?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=1518815936
The ARRL Ham Radio License Manual – if I could have started all over 21 years ago when I first met John Bedini, I would have gotten my basic ham radio Technician’s license. The study guide is a basic electrical engineering course that teaches you all the basic components, formulas as well as the basic laws as it applies to radio transmission. This would have greatly cut my learning curve, especially as it applies to high frequency devices like Tesla Coil experiments and related. It’s so simple that even 6 year old children have gotten their basic ham radio license. For the practical application of electrical engineering principles, there is no better start than Eric’s book above and the ARRL manual – go get your ham radio license. It’s inexpensive and simple. https://www.amazon.com/gp/product/1625950829?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=1625950829
If you’re walking into all of this brand new and you actually TAKE ACTION and watch the above presentations and get the books and study them, you will be light years ahead of where any of us were 20, 30 or even 40 years ago. For some very famous people in this field, it has taken a lifetime of research to simply come to these conclusions that are presented in the above material. You can have this in your hands almost instantly and with the books, it may take 1-2 weeks to go through this material repeatedly, it’s impossible to stress the value of this and how fortunate you are that you even have access to all of this.
Then join Energetic Forum here: http://www.energeticforum.com/register – it is one of the leading discussion forums online for all the above topics. It is free to join and fast – once you join, regardless of what emails you receive, send an email to help at emediapress dot com with your username and email you used during registration requesting activation and your account will be activated right away. You can learn from some experts in there, share your experiments, and get answers to a lot of your questions.
Energy Science Forum is also a great resource with less members and there is no approval process, just join, read, post, etc. there is a lot of info shared there that is not in Energetic Forum. http://energyscienceforum.com/register
This call is JAM-PACKED with a lot of info. Jim gives an overview of each and every presentation he gave at the Energy Science & Technology Conference. He also discusses his latest book, which has been released on Amazon – The Meaning of Unity in Energy Conversion Systems.
Then we open up for questions from the callers and there are quite a bit that cover a lot of areas of his work.
The Meaning of Unity in Energy Conversion Systems by Jim Murray
At the 2018 Energy Science & Technology, Jim Murray, a legend in the Tesla Sciences & Free Energy field presented on The Meaning of Unity in Energy Conversion Systems. This is one of the most important presentations given in this field simply for the fact that is explains an accurate accounting method so that the distinctions are made between system efficiency and conversion efficiency. The bottom line is that this shows how to properly compare the input to the output of a system, which is more complex than it initially appears.
Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.” However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft.
Jim Murray – 2018 ESTC
Therefore, it quickly became evident that not all the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized. What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts.
Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.”
The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses. During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.
Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well-established science of corporate book-keeping.
Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact.
Both efficiency concepts shall be fully explained in this book. Simply, this book serves as a definitive guide for those who wish to properly validate their input vs output claims. It also includes copies of one of the most significant and important patents in history in this field, The Dynaflux Alternator, which is Jim’s generator that has a reduced Lenz Law Effect meaning it has less drag than conventional science will admit is possible. There is also another related patent on Jim Murray’s Dynaflux Alternator, which gives a much wider picture. The Dyanflux was used as an example in the book so is not required to understand what it is about, but is valuable to know about.
Here is an interview of me by Greg Carlwood of Higherside Chats, a popular online podcast. The topic focuses on concepts from my presentation Hacking the Ather, which I gave at last year’s 2017 ESTC. This interview was on October 12, 2018.
Hacking the Aether is a simplified Unified Field Model that shows in a very simple way that any relativistic effects are caused by the aether, how the aether has been proven by Dayton Miller and Einstein admitted he had no confidence in his own work anymore, an interferometer experiment that shows the aether is moving from above towards the downward direction causing a gravitational push and many other concepts that are seamlessly tied together.
The Meaning of Unity in Energy Conversion Systems by Jim Murray
Initially, it had been assumed that a simple ratio computed by dividing the output power by the input power would provide a reliable yardstick for motor power efficiency. The basic idea, was sound, for the closer the quotient came to unity, the nearer the motor efficiency would be to 100%. Hence began the so-called “Quest for Unity.”
However, early “electric engines” were very inefficient, probably delivering no more than 30% of the electrical input power to the output shaft. Therefore, it quickly became evident that not all of the applied power was being converted to a mechanical output. Clearly, inefficiencies were involved, and they would have to be accounted for. Until this was complete, the simplified approach to establishing a Factor of Unity could not be realized.
What is remarkable, in the history of motor development, is the curious degree of synergy that seems to have accompanied these early pioneering efforts. Between 1839 and 1850 the British Brew Master James Joule conducted an elegant series of experiments, in which he sought to unify electrical, chemical and thermal phenomena by demonstrating their inter-convertibility and their quantitative equivalence. The results of Joule’s work were published in the Philosophical Transactions of the Royal Society, with a very impressive title: “On the Mechanical Equivalence of Heat.”
The contributions of Lord Kelvin must be considered next. His paper, “The Dynamical Equivalent of Heat,” published in 1851, contended that energy could be “lost to man irrecoverably; but not lost to the material world”. Thomson was thus the first person to understand that all energy changes involve energy dissipation, and losses.
During the second half of the nineteenth century Kelvin and other scientists, including Clausius, Rankine, Maxwell and, Boltzmann, continued to develop these ideas. Their combined efforts resulted in the establishment of the Science of Thermodynamics; with Conservation of Energy as its First Law and the Dissipation of Energy as its Second Law.
Accordingly, motor researchers were thus made aware of the extreme importance of classifying all known motor losses, and accounting for them with the same degree of accuracy as would be exhibited in the well established science of corporate book-keeping.
Ultimately, such practices would lead to the development of two principle kinds of Efficiency Measurements, both very valuable in all research pertaining to rotating components, but, particularly valuable for developing an understanding of over-unity as a scientific fact. Both efficiency concepts shall be fully explained in this presentation.
Since 1977, the entire field of thermodynamics was upgraded with Ilya Prigogine’s Nobel Prize winning work to include Open System Thermodynamics. In a nutshell, it means that any system that is open with the environment can output more work than the operator has to supply.
Take note that contrary to the conventionally trained academic who is always quick to point out that there can’t be more output than input is making a false argument because that is not what is actually claimed by the inventors of legitimate free energy technologies.
More output than what the operator has to supply is not the same thing as claiming more output than was is going into the system. Obviously, this means there is other input from elsewhere that is not provided by the operator of the system.
It is often said that Prigogine’s work extended thermodynamics to include open systems, but the reality is that it did not extend thermodynamics, it corrected it. The reason for this is very simple – there is no such thing as a closed system and every single system is open.
The deeper reality is that every system is open – some are designed to make use of external input that is separate from the operator’s input and some are designed to only use the operator’s input.
If you have a flashlight and the battery has 10 units of potential energy to light the bulb, when the flashlight is on, minus losses, there will only be 10 units of light or less depending on efficiency. Efficiency is the ratio if TOTAL input vs INTENDED output. This is what is meant by a closed system because it does not utilize free environmental input such as gravity, heat, light, wind, water, etc…
If you take this flashlight and stick it deep into a snow bank that is freezing, the battery will interact with this cold environmental temperature and it will not power the light as long. That is because it is not a closed system after all and easily interacts with the environment outside of itself. If it was a closed system, the battery would continue to power the light irrespective of the environmental temperature that the flashlight is operating in.
Let’s look at an example of a child flying a kite. If the child inputs 10 units of energy and the wind inputs 90 parts energy for a certain period of time, that is 100 parts of energy total input. If 70% of all that input is lost in bad kite design, wind friction on the kite, etc… that means that only 30 units of energy were actual kite flying work accomplished. 100 parts of energy were input and 30 units of INTENDED work were done – that equals 30% efficiency.
That means 30 units of intended work were accomplished but the child only had to input 10 units of work. That is a 300% net GAIN in energy compared to what the operator had to pay for. The ratio of OPERATOR input compared to INTENDED work done is COP or Coefficient of Performance. In this case, the COP is 3.0. COP does not include free environmental input and this is how every heat pump is rated for example.
The kite flying example is a perfectly legitimate free energy system where the operator of the system got way more out of the system than what he had to put in. Again, notice that this is NOT more output than input, but more output than the operator had to contribute – meaning there is indeed extra free environmental input from somewhere.
Watch this excerpt from Peter Lindemann’s Open System Thermodynamics presentation for deeper elaboration on this concept. The next time a skeptic tells you that there can’t be more output than input and that anything like that would violate the laws of thermodynamics, please point them to this post and video because the fact is that they are making an illegitimate argument about something that was never claimed by those who have real free energy technologies.
Please help spread this truth by using the share buttons below!
